Astur Posted March 30, 2021 Report Posted March 30, 2021 (edited) Hello! I'm having issues with the persistence. The ground equipment and the interior switches do not persist . I tried unchecking the persistence in settings an put it on again but it does not work. Log attached. Log.txt Edited March 30, 2021 by Astur Quote
Coop Posted March 31, 2021 Report Posted March 31, 2021 Can you upload the files inside the aircraft / plugins/sr_systavi/settings? Quote
Sr22captain Posted March 31, 2021 Report Posted March 31, 2021 I’d like to see the parking brake persist. Every time I load the aircraft the parking brake is set. I real life I rarely set my parking brake. Quote
Astur Posted March 31, 2021 Author Report Posted March 31, 2021 3 hours ago, Coop said: Can you upload the files inside the aircraft / plugins/sr_systavi/settings? All of them are empty. popups.cfg settings.cfg a.txt persist.cfg Quote
Astur Posted March 31, 2021 Author Report Posted March 31, 2021 (edited) I also tried reínstalling the aircraft, forgot to mention it earlier. Edited March 31, 2021 by Astur Quote
Coop Posted March 31, 2021 Report Posted March 31, 2021 52 minutes ago, Sr22captain said: I’d like to see the parking brake persist. Every time I load the aircraft the parking brake is set. I real life I rarely set my parking brake. The parking brake is an X-Plane thing to default on Quote
Coop Posted March 31, 2021 Report Posted March 31, 2021 32 minutes ago, Astur said: All of them are empty. popups.cfg 48 B · 0 downloads settings.cfg 48 B · 0 downloads a.txt 34 B · 0 downloads persist.cfg 48 B · 0 downloads Interesting, I will take a look to figure out why that could be. Can you check to make sure the folders aren't set to "Read Only"? Quote
Astur Posted March 31, 2021 Author Report Posted March 31, 2021 (edited) 20 minutes ago, Coop said: Interesting, I will take a look to figure out why that could be. Can you check to make sure the folders aren't set to "Read Only"? Yeah they are. And they keep reverting themselves to read only. God, i hate windows so much, let me see if i can fix it. Edited March 31, 2021 by Astur Quote
Astur Posted March 31, 2021 Author Report Posted March 31, 2021 2 hours ago, Coop said: Interesting, I will take a look to figure out why that could be. Can you check to make sure the folders aren't set to "Read Only"? Ok Coop i surrender with this. Windows doesn´t give a ** about how many permisons i change or how many different ways i try to do it, it just wont let me change it to non read. Is there any way to fix this without doing that? All the time the same craphttps://gyazo.com/7013cc254579ba64694107562b66c274 Quote
Coop Posted April 1, 2021 Report Posted April 1, 2021 Looking here, https://appuals.com/how-to-fix-folder-keeps-reverting-to-read-only-on-windows-10/ Perhaps you have set the drive to "read only" permissions by default? Or maybe some anti-virus is forcing it. Quote
Astur Posted April 1, 2021 Author Report Posted April 1, 2021 (edited) I tried all of that already, it doesn't work. But after hours playing with permissions, i can confirm that the folder its not read only as i thought, because when something is read only you should have a check mark instead. Meaningless: Read only: And the persistence files doesn't have the read only activated as you can see. Also, other airplanes with persistence like the TBM for example are working fine. I tried starting xplane as an administrator too, but it makes no difference. Edited April 1, 2021 by Astur Quote
mike10 Posted April 25, 2021 Report Posted April 25, 2021 hello, I am having this same issue. Did Astur have any luck in solving it? I checked and my folders are not set to read only. Quote
Coop Posted April 25, 2021 Report Posted April 25, 2021 We've got it fixed in 1.0.2 which should be releasing later this week. Quote
mike10 Posted April 27, 2021 Report Posted April 27, 2021 (edited) On 4/25/2021 at 9:53 AM, Coop said: We've got it fixed in 1.0.2 which should be releasing later this week. Sorry, thought it was fixed but it’s not. Persistence still not working and the option to remove 3D passenger models not working FYI.. the files have data in them now and are saving the proper switch positions but when I open the sim it shows everything left off. It’s like the sim is ignoring the file. Edited April 27, 2021 by mike10 Quote
Coop Posted April 27, 2021 Report Posted April 27, 2021 Hi Mike, Yeah, we figured out what was going on in certain cases, fixed and will be coming with the next update, 1.0.3 Quote
mike10 Posted April 28, 2021 Report Posted April 28, 2021 5 hours ago, Coop said: Hi Mike, Yeah, we figured out what was going on in certain cases, fixed and will be coming with the next update, 1.0.3 Ok, thank you. Another odd thing. In the non turbo I can remove the 3d passengers but not in the turbo. Persistence is broken in both. Anyway, not a huge deal just figured I would let you know. BTW I love the way the plane flies and how the engine and systems are modeled. If I could make a suggestion a option for a used plane would be nice. Quote
mike10 Posted October 8, 2021 Report Posted October 8, 2021 On 4/27/2021 at 7:43 PM, Coop said: Hi Mike, Yeah, we figured out what was going on in certain cases, fixed and will be coming with the next update, 1.0.3 Hello, I was wondering how 1.0.3 is coming along. Quote
mike10 Posted October 8, 2021 Report Posted October 8, 2021 36 minutes ago, Coop said: Just released an hour ago Awesome! Thanks! Quote
mike10 Posted October 9, 2021 Report Posted October 9, 2021 got a chance to try out 1.0.3 and I am happy to say my issue was fixed! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.