hiddenace Posted December 2, 2020 Report Posted December 2, 2020 (edited) When to start up a flight and the Trim was stuck in the full nose down position. Things I already tried. (Using Xplane 11.51B2) 1) CB panel checked all breakers in 2) autopilot confirmed off (also power cycled the autopilot several times 3) isolated my joystick by unplugging 4) full shut down and restart of sim 5) checked MX manager all green. Still paid the $7,500 to change out the elevator linkage the only thing that seems to fix it. Is popping the AP Servo CB, but then i don’t have autopilot. IMG_4831.MOV Edited December 2, 2020 by hiddenace Quote
Goran_M Posted December 2, 2020 Report Posted December 2, 2020 Go into maintenance manager and check trim linkages. You likely had a tail strike, or the the aircraft dropped on loading and damaged them. Quote
hiddenace Posted December 2, 2020 Author Report Posted December 2, 2020 See bullet #5 I checked all of that and even replaced it anyway still is happening Quote
rjb4000 Posted December 2, 2020 Report Posted December 2, 2020 Is it possible you have a script or joystick assignment or something assigned to manipulate trim that's being activated continuously? It looks like right after you move the trim wheel the trim is moved back to the nose down position. Quote
hiddenace Posted December 2, 2020 Author Report Posted December 2, 2020 2 hours ago, rjb4000 said: Is it possible you have a script or joystick assignment or something assigned to manipulate trim that's being activated continuously? It looks like right after you move the trim wheel the trim is moved back to the nose down position. That’s what I thought too so I disconnected my joystick and it was still happening. I’ll double check to make sure I don’t have trim assigned to my throttle and get back to you guys. I’ve also reverted back to 11.51R2 so if that resolves it then it’s could be a Beta issue. I know you guys don’t support Beta versions of X-Plane so I’ll stay at 11.50R2 for now Quote
Goran_M Posted December 2, 2020 Report Posted December 2, 2020 4 hours ago, hiddenace said: I know you guys don’t support Beta versions of X-Plane so I’ll stay at 11.50R2 for now It definitely shouldn't be happening, anyway. I watched someone stream the TBM within the last week, and he had no problems in the latest version of X-Plane. This definitely looks like some kind of hardware calibration issue or some kind of script forcing the trim to do things it shouldn't be doing. Quote
CJSouthern Posted December 5, 2020 Report Posted December 5, 2020 Stuck key on keyboard? Perhaps try with keyboard disconnected? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.