Captain744 Posted November 30, 2018 Report Share Posted November 30, 2018 Hello there, After completing a successful circuit and 1st landing the plane was successfully shutdown saved in xplane and then revisited about 30 minutes later. On turning on the crash bar and battery Iv now discovered my prop rpm,ng,itt, comms and navs display all have a Red Cross over them. Can anyone tell me why this is? What did I miss? (No faults reported in maintenance) This happened in the x-plane beta once before so I reverted back to the latest non beta version, (created new airframe )thinking this was down to a conflict with the beta. Many thanks Lee. Quote Link to comment Share on other sites More sharing options...
Goran_M Posted November 30, 2018 Report Share Posted November 30, 2018 Are you sure you went through absolutely everything in the maintenance manager? Avionics section included? Quote Link to comment Share on other sites More sharing options...
Captain744 Posted November 30, 2018 Author Report Share Posted November 30, 2018 Yes indeed. Quote Link to comment Share on other sites More sharing options...
Goran_M Posted November 30, 2018 Report Share Posted November 30, 2018 Try creating a new airframe. Quote Link to comment Share on other sites More sharing options...
Captain744 Posted November 30, 2018 Author Report Share Posted November 30, 2018 Yes Iv done this twice already but the problem returns. I shall do this a 3rd time and see what happens. Quote Link to comment Share on other sites More sharing options...
Goran_M Posted November 30, 2018 Report Share Posted November 30, 2018 Double check you are activated. If all this fails, try a reinstall of the aircraft. Quote Link to comment Share on other sites More sharing options...
Captain744 Posted November 30, 2018 Author Report Share Posted November 30, 2018 I’ll go for the reinstall of the Aircraft. WIll let you know how I get on. Quote Link to comment Share on other sites More sharing options...
jomama Posted November 30, 2018 Report Share Posted November 30, 2018 3 hours ago, Captain744 said: Hello there, After completing a successful circuit and 1st landing the plane was successfully shutdown saved in xplane and then revisited about 30 minutes later. On turning on the crash bar and battery Iv now discovered my prop rpm,ng,itt, comms and navs display all have a Red Cross over them. Can anyone tell me why this is? What did I miss? (No faults reported in maintenance) This happened in the x-plane beta once before so I reverted back to the latest non beta version, (created new airframe )thinking this was down to a conflict with the beta. Many thanks Lee. Yeah. I've noticed this too. Whenever I save a situation and go back to it, go through the process of putting power on the aircraft, I get no primary electric. The engine gauges have X's through them and no cockpit lights. I checked everything on the maintenance page everything appears to be fine. When I restart X-Plane and start a new flight w/o going into the saved flights menu. Things are fine. I only see this after trying to save a situation involving the TBM and trying to use it. Hope this makes sense. Quote Link to comment Share on other sites More sharing options...
Captain744 Posted November 30, 2018 Author Report Share Posted November 30, 2018 Hi Jomama, I’m glad it’s not just me then. So I wonder if we don’t save/reload our flights will temp solve this issue? Quote Link to comment Share on other sites More sharing options...
jomama Posted November 30, 2018 Report Share Posted November 30, 2018 1 minute ago, Captain744 said: Hi Jomama, I’m glad it’s not just me then. So I wonder if we don’t save/reload our flights will temp solve this issue? It has for me. Quote Link to comment Share on other sites More sharing options...
Captain744 Posted November 30, 2018 Author Report Share Posted November 30, 2018 Thanks for letting me know. I’m still going to go for an aircraft reinstall and see if that makes any difference will let you know Quote Link to comment Share on other sites More sharing options...
Captain744 Posted December 2, 2018 Author Report Share Posted December 2, 2018 (edited) Well I reinstalled the aircraft setup a new airframe did a couple of circuits landed, saved my plane location. Loaded up today, turned on the crash bar and the same thing. Red Crosses on rpm,no,itt and COMMS. Also noticed in RA FAIL in yellow. Also my altitude is zero even though I have the correct QNH. I am able to resolve all this by choosing to go to another parking location in xplane flight configuration then all is ok after the plane has moved to a different ramp? Any ideas on what’s going on Gorman? Edited December 2, 2018 by Captain744 Quote Link to comment Share on other sites More sharing options...
Goran_M Posted December 3, 2018 Report Share Posted December 3, 2018 Does it always happen at that location? Does it always get fixed if you start up at a different airport? Can you check at a few different airports, and post back the results? What airports are you using and what airports give you the red XX's? (Want to see on my system) Quote Link to comment Share on other sites More sharing options...
Ricardo Pallavidino Posted December 3, 2018 Report Share Posted December 3, 2018 Just a thought: Have you guys checked if there is any circuit break pop up? Quote Link to comment Share on other sites More sharing options...
jomama Posted December 3, 2018 Report Share Posted December 3, 2018 9 hours ago, Ricardo Pallavidino said: Just a thought: Have you guys checked if there is any circuit break pop up? Yes. Quote Link to comment Share on other sites More sharing options...
jomama Posted December 3, 2018 Report Share Posted December 3, 2018 (edited) 13 hours ago, Goran_M said: Does it always happen at that location? Does it always get fixed if you start up at a different airport? Can you check at a few different airports, and post back the results? What airports are you using and what airports give you the red XX's? (Want to see on my system) 1. If I save a situation after having flown, parked and shutdown the aircraft and then start s new session from "Load Saved Flight" menu item after restarting XP; yes. 2. No. It fixes itself if I click on: "Create New Air Frame". 3.I have saved situations at different airports with the same results (again, the parameters have to be the same as #1 and I fly 3rd party aircraft exclusively and have no problems with the other aircraft). 4. Currently, KPWK (my home airport), KCMI, KORD, KSNA and KBNAl One thing all those airports have in common is that they are 3rd party scenery. KPWK and KCMI are free downloads. The rest are payware. FWIW, I have tried restarting the aircraft from the saved KPWK situation after moving it to another airport KLAX (a default airport) and no X's on the engine instruments. I'll try saving eh TBM at LAX and report back. Thanks for sticking with this and the help. Edited December 3, 2018 by jomama Quote Link to comment Share on other sites More sharing options...
jomama Posted December 3, 2018 Report Share Posted December 3, 2018 (edited) Hi Goran, Okay, I tried a few things for you: First, I did a fresh start at KMDW (a default airport), at the FBO. I started the aircraft and taxied it around; then parked it, shut it down, and saved it. Closed X-Plane and then restarted it loading from "Load Saved Situations"; turned on the battery and here's what I got: Edited December 3, 2018 by jomama Quote Link to comment Share on other sites More sharing options...
jomama Posted December 3, 2018 Report Share Posted December 3, 2018 Turned off the battery and moved the same, saved, airplane to another default airport, KEVG and no problems. Quote Link to comment Share on other sites More sharing options...
Goran_M Posted December 3, 2018 Report Share Posted December 3, 2018 What happens if you don't load a saved flight? Can you try to shut down the sim, without saving, then restart and click on "resume last flight"? After that, reload the sim and select "Start new flight" with the TBM. Please report back. Quote Link to comment Share on other sites More sharing options...
jomama Posted December 3, 2018 Report Share Posted December 3, 2018 (edited) 3 hours ago, Goran_M said: What happens if you don't load a saved flight? Can you try to shut down the sim, without saving, then restart and click on "resume last flight"? After that, reload the sim and select "Start new flight" with the TBM. Please report back. It works fine when loading a new flight or on "resume last flight" after ending a flight and the aircraft is shut down. Just when loading a saved situation. Go figure. Edited December 3, 2018 by jomama Quote Link to comment Share on other sites More sharing options...
Goran_M Posted December 3, 2018 Report Share Posted December 3, 2018 The save state function has 1 or 2 little bugs in it, and is being worked on. This is one to add to that. Thanks. Quote Link to comment Share on other sites More sharing options...
jomama Posted December 4, 2018 Report Share Posted December 4, 2018 Glad we were able to help. This airplane is well worth the trouble. Quote Link to comment Share on other sites More sharing options...
Ricardo Pallavidino Posted December 4, 2018 Report Share Posted December 4, 2018 36 minutes ago, jomama said: This airplane is well worth the trouble. Indeed Quote Link to comment Share on other sites More sharing options...
Captain744 Posted December 4, 2018 Author Report Share Posted December 4, 2018 (edited) Hi Goran, I’m glad we found out where the issue is. Looking forward to the improvements to come. Remarkable plane. So much fun to fly and very challenging. ThankYou and to everyone involved with this plane. Edited December 4, 2018 by Captain744 Quote Link to comment Share on other sites More sharing options...
Scotte Posted July 12, 2020 Report Share Posted July 12, 2020 I just purchased the TBM 900 and this is still happening to me with XPlane 11.41 and the latest TBM Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.