Jump to content


Photo

Getting a FSX model into blender and into x-plane


  • Please log in to reply
14 replies to this topic

#1 samen

samen

    Advanced Member

  • Members
  • PipPipPip
  • 258 posts

Posted 31 August 2010 - 04:13 AM

Due to some interest in the way I did it I have decided to write a tutorial about it.he basics of making with blender with x-plane.
This tutorial requires that you have some knowledge of creating for x-plane and t


1) Get these scripts. http://www.fsdevelop...read.php?t=8298
2)Run blender and go into File>Import>FSX mdl file.
It is worth noting that the in FSX you have two mdl files. One will be the interior and the other will have a similar name to model.RR etc.
3) Run the scripts and get the file into blender. You will notice a horrid looking mesh presented before you. Normals might be horrible and moving parts will be in their deflected position.
4) Here you will require a previous insight into blender and move the different objects around aligning them with the other meshes.
5)Some very expert 3D modellers might want to clear this but I used the edge split modifier to correct the shading problems. This will increase the number of verts and give some aggressive z-buffer but I dont know other ways of doing it without screwing up the mesh.
6) Import the .obj file of the plane you want to create the exteritor for. You can do this by opening the plane in plane-maker and going into special and clicking on create object file.
7) Move this file into the folder where your plane resides.
8) Import this file into blender and move it to a different layer than 1,2 and 3.
9) Move the FSX mesh in order to align it to the plane maker model.
10) Now you are ready to texture, Check in the texture folder that came with your FSX aircraft. Familiarize yourself with the texture files so you get to know what object uses which texture file.
11) Go back into blender and split a window. Open the UV/image editor in that.
12) Select an object such as the fuselage and go into edit mode and press 'A' once there to select all faces. The UV image editor will show the UV mapping in right order only that it might not have an image file associated with it.
13) Go into your aircraft folder and make a new folder called 'objects'. Place the texture files that you are going to use in blender into the objects folder.
14) Go back into blender again and open the texture files in the UV window. It is important that your files are in png format or you might run into problems later.
15) Now this is a very tiring step. You need to go into edit mode with each and every object and select the required texture file.
NOTE: It is important that you do not join objects in order to simplify this so called texturing of the objects. You will be backing out on a very useful feature then.
16) Once the whole mesh is textured you need to group objects that use a different texture file and move them to different layers and then into different .blend files.
17) An important step Go into shading, and materials(it is something like that, im away so the information being transferred here is limited). There will be three sliders to set up the materials. Pull them all up to 1.00.
18) Considering now that you may have split up the objects into different .blend files respective of the texture file save them in the objects folder and then export .obj files.
19) Go into plane maker>Standard>misc objects and select those obj files. Hide parts of your plane as necessary and then save. Open the plane in x-plane and check the exterior. If the mesh looks ok to some extent you are ready to animate.
20) Animation tutorial will be made next summer and this will be further detailed with screenshots as well next summer.

#2 X-Plane Australia

X-Plane Australia

    Advanced Member

  • Members
  • PipPipPip
  • 449 posts
  • LocationYMML - Melbourne Australia

Posted 31 August 2010 - 05:29 AM

Looks hard but I will try sometime in the future

CPU: Intel i7 4770k @4.6Ghz Graphics Card: Gigabyte GTX 770 4GB OC Motherboard: Asus Z87 Pro Ram: Geil 16GB 1600mhz PSU: Corsair TX-650m 

Case: NZXT Phantom 630 Cooler: Noctua NH-U14s Monitor: Dell S2740l 27" IPS display

STLNFLN.png


#3 samen

samen

    Advanced Member

  • Members
  • PipPipPip
  • 258 posts

Posted 31 August 2010 - 05:36 AM

Actually its ten thousand times starting from ground up, but you can learn animating real fast if you convert FSX models.

#4 iamfallen

iamfallen

    Advanced Member

  • Members
  • PipPipPip
  • 39 posts
  • LocationKAMN

Posted 31 August 2010 - 05:37 AM

I have done this(with permission) on a project before. It is not to bad to do. The animation is time consuming though. I have yet to finish modeling the the SOH A-26 I was working on. Work just hasn't allowed me the time to complete it.

#5 samen

samen

    Advanced Member

  • Members
  • PipPipPip
  • 258 posts

Posted 31 August 2010 - 08:21 AM

I actually like the animations. I was able to animate the entire wings in about 3 hours and the wingflex in about 5 hours. It became less complicated on my second try

#6 Oliver

Oliver

    The French Pilot

  • Members
  • PipPipPip
  • 897 posts
  • LocationFlorida\Paris

Posted 31 August 2010 - 11:19 AM

Yup, a friend of mine and I self taught ourselfs at converting FSX models  :D

Specs:

Desktop: Intel Core I7 2600 @ 3.4Ghz, AMD Radeon HD6850 with 1GB DDR5 Vram, 10GB DDR3 RAM, 1.5TB HDD.
Laptop: Intel Core I7 2630QM @ 2.00Ghz, Intel Graphics 3000, 6GB DDR3 Ram, 2TB HDD.
Tablet: iPad I 64Gb with 3G.

80 Hours flight time.
Flown: C-150,C-152,C-162,C-172,C-172 with G-1000,C-182,C-182T,C-182T with G1000,DR400-180,DR400-120,Tecnam P2002,PA28-201 "Archer", PA28T "Arrow", Piper PA-34 "Seneca", Bell 206, R22, PA32 "Saratoga"


#7 JB_XUSA

JB_XUSA

    Advanced Member

  • Members
  • PipPipPip
  • 51 posts

Posted 03 October 2010 - 02:48 PM

Due to some interest in the way I did it I have decided to write a tutorial about it.he basics of making with blender with x-plane.
This tutorial requires that you have some knowledge of creating for x-plane and t


1) Get these scripts.http://www.fsdevelop...read.php?t=8298


Has anyone been able to open this link. I've been searching in google for these but to no success. Could you display the link again.
From a 3d developer wanna be, this is a great tutorial you are doing. I've found that looking and taking apart what other people have done really is a great tool to work with. I find blender and ac3d tough programs to start from scratch, but what you did with the 330 is great to take apart and learn what things do and how they work. Thanks for sharing this and I can not wait till the next installment of your animation tutorials.

JB
Posted Image
COO- Chief of Operations www.x-usairways.com

Private pilot - single engine land
Instrument
120+hrs

#8 samen

samen

    Advanced Member

  • Members
  • PipPipPip
  • 258 posts

Posted 06 October 2010 - 06:13 AM

Sorry about that. The link has been changed now. I will start my animation tutorials the moment I am done with these aircrafts

#9 JB_XUSA

JB_XUSA

    Advanced Member

  • Members
  • PipPipPip
  • 51 posts

Posted 14 October 2010 - 08:30 PM

Hey Samen and others that have sucessfully installed these scripts. To key you in on what I have done.

I have installed blender
I have installed the xplane to blender scripts correctly but when I try to install the mac versions of these scripts my command window opens gives this text with a lot of errors and nothing actually is happening installation wise. Any ideas? After trying to install I open Blender and go to import and look for the .mdl fsx model import and it is not there. I do see the xplane obj imports and the likes.


Last login: Thu Oct 14 20:31:28 on ttys000
/Users/justin/Desktop/Blender2FSX_010/install.cmd ; exit;
justin-bumgardners-imac:~ justin$ /Users/justin/Desktop/Blender2FSX_010/install.cmd ; exit;
/Users/justin/Desktop/Blender2FSX_010/install.cmd: line 1: @rem: command not found
/Users/justin/Desktop/Blender2FSX_010/install.cmd: line 2: @echo: command not found
/Users/justin/Desktop/Blender2FSX_010/install.cmd: line 11: syntax error near unexpected token `"tokens=2 delims=="'
/Users/justin/Desktop/Blender2FSX_010/install.cmd: line 11: `for /f "tokens=2 delims==" %%I in ('assoc .blend') do set FTYPE=%%I'
logout

[Process completed]
  • Like x 1
  • List
Posted Image
COO- Chief of Operations www.x-usairways.com

Private pilot - single engine land
Instrument
120+hrs

#10 karingka

karingka

    Advanced Member

  • Members
  • PipPipPip
  • 556 posts
  • LocationSingapore

Posted 25 April 2011 - 01:56 AM

Do you need windows for the scripts?

#11 AgreMeister

AgreMeister

    Advanced Member

  • Members
  • PipPipPip
  • 81 posts

Posted 05 July 2011 - 09:22 AM

I just reinstalled the scripts because I somehow deleted them when cleaning up my comp, and now it gives me this error for every MDL file I try to import

Attached Files



#12 samen

samen

    Advanced Member

  • Members
  • PipPipPip
  • 258 posts

Posted 15 July 2011 - 09:24 AM

Were you able to import this exact file before re-installing?

#13 AgreMeister

AgreMeister

    Advanced Member

  • Members
  • PipPipPip
  • 81 posts

Posted 16 July 2011 - 04:58 PM

I Figured it out, it was only with that specific model, the rest worked fine.

#14 AgreMeister

AgreMeister

    Advanced Member

  • Members
  • PipPipPip
  • 81 posts

Posted 17 July 2011 - 06:45 PM

After getting my error again, im assuming these scripts only work for FSX Models, not FS2004 Models?

#15 Cameron

Cameron

    Founder of X-Aviation

  • X-Aviation
  • PipPipPip
  • 4,273 posts

Posted 17 July 2011 - 07:50 PM

After getting my error again, im assuming these scripts only work for FSX Models, not FS2004 Models?


Correct.

"You don't have to take criticism personally, but you do have to take it seriously."

 

X-Plane 10 is here for $5 Worldwide Shipping!

Twitter | X-Aviation Blog | Facebook

X-Aviation - High Quality Add-Ons for X-Plane!

XAsig.png

 





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Click to return to top of page!