cpuwolf
-
Posts
195 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Latest X-Plane & Community News
Calendar
Downloads
Store
Posts posted by cpuwolf
-
-
17 hours ago, Rossco said:
Really impressed with the QGMC & find it a real joy to use when flying the TBM.
I do have a question though re the VS/FLC adjustment wheel. Is this only for either the VS or FLC or can it be programmed to work with either once they are selected?
I see it's labeled for the VS in the programming menu however in the aircraft using mouse control it can be used for either VS or FLC IAS. I tried programming my Saitek panel to operate this previously however it didn't work very well.
I didn't notice that. but logic is simple:
you are saying mouse control can be either VS or FLC IAS, how to control? only mouse middle scroll?(I will check)
then if you assign UP/DOWN keys to TBM's designed UP/DOWN VS keys, then they will do the same thing, the mode switch handling will be done inside of aircraft code itself.
I don't know Rossco you have any programming background.
anyway I will investigate that
-
On 6/11/2019 at 8:08 AM, Rossco said:
Well Quickmake was true to his name & my QGMC710 was delivered here in Australia yesterday. Thank you QM for your excellent service!
The unit looks fantastic & and all knobs & buttons have a great feel to them so hoping they will last quite a long time.
It has taken me some time to locate the files required & to install in to XPlane. The first link to Github would open the file but not download them. This one worked however https://github.com/quickmake/QGMC710/releases & I downloaded v2 zip file.
Anyway just to clear something up it appears the QGM files do not program the unit with the necessary XPlane commands to operate the TBM900 is that correct?
I still have to find & allocate these myself? I thought with the files I installed into XPlane from the link that this would automatically be done for me. I'm not that familiar with XPlane to be honest so there may be something I have overlooked.
Really looking forward to using this as soon as I get it sorted.
after copy v2 all file into you x-plane, and load TBM9, then in joystick settings, on QGMC710 big picture left bottom side, there is a "reset to default". then it will be done
this hidden functionality few people know...hahaha
-
49 minutes ago, Rossco said:
Hi cpuwolf have sorted the problem by doing "topup" which allowed me to use Paypal (delayed time) or my own credit card. This was much easier however wasn't obvious at first.
My bank in Australia is very cautious & recommended not to use the payment method suggested by Superbuy. I wasn't too fussed about the app wanting me to log in to my bank via it either. Prefer to keep that very separate from any third party apps or programs.
Did I read that Quikmake is away at present so delivery is delayed?
he is on a business trip this month. may have some delay
-
On 5/29/2019 at 8:54 AM, Rossco said:
Hi Guys,
Went to order unit through Superbuy however not impressed with their payment method & my bank here in Australia recommends not using the system they link to (Polipay).
I have Paypal, anyone been able to use this with Superbuy? I couldn't see a link.
Hi CPUWolf, tried to get back in touch via WeChat however became too difficult as it had dropped my password & security method to retrieve didn't work. Gave up with it eventually. Anyway saw the links here where to order QGMC710.
Edit: Just saw if I do a "top up" I can use Paypal or a credit card. Problem is I'm not sure of the shipping cost at this stage of the transaction. Certainly different.
.
hi Rossco,
At this moment, I can confirm superbuy.com is a feasible way to buy.
Polipay? Alipay? Alipay you don't know?
Chinese biggest biggest online payment system. if you have a chance, you should come to China having a look.
you know wallet in China, just forget it... we hang out without it, zero cash. what I have to take on ? only a smartphone. you can buy everything, really everything in China with smartphone. no cash country. that is how Alipay system works
you should take a look.
-
8 hours ago, Aloneintheskies said:
OMG! I'll buy it in an instant! Please keep me updated.
How about combo?
.jpg.741c38114d3cde246cc8ba681dc92075.jpg)
-
21 hours ago, Aloneintheskies said:
Just as an suggestion, I would love to see an radio panel for Boeing aircraft.
you will get it soon
-
On 5/18/2019 at 6:27 AM, malenca said:
the links are not working for international shipment....any guidance on how to order??
hi Malenca,
https://item.taobao.com/item.htm?spm=a1z10.1-c.w4004-18408194478.3.6f965b84GYWUa7&id=584036361539
this is for Chinese only.
so for international shipment, just use below link, you can order it via superbuy.com, which has been approved to feasible
https://x-plane.vip/quickmake/
-
@slapshot I am very glad you get it after a long trip.
looks like "superbuy" works great.
beautiful table, you play DCS as well. "quickmake" he is making his own DCS A10 cockpit, you can check his bilibili video channel above.
anyway all good. wish you have peace and a happy life
-
give you a hug. thank you for proving I'm right
-
yes I noticed it as well, when fly straight with yaw damper on, you will see rudder trim is to the left most of time during cruising.
I am not quite sure what it should be in real TBM9.
-
24 minutes ago, Goran_M said:
Running out of memory usually indicates too much scenery being loaded. Were you flying through some dense ortho scenery?
yes I fly photo, but I fly around this area every day, really every day.
without set minimum, if I direct click enter, everything works great.
as I said, I met twice. I think I can reproduce more, but I didnt't try it, because if x-plane crash, my TBM will be in the crashed state on my next starting x-plane. it is frustrated.
back to the "stuck", I opened my task manager of windows, you can see x-plane was eating memory more and more, at some point, pop up a window saying out of memory, then die
-
-
9 hours ago, xpst said:
I definitely still see OBS in 1.1.7.
Maybe the mode you were in at this time does not allow OBS ?
thank you. yes you are right. my fault
-
OBS was there in old version, but I cannot sure which version
-
3 hours ago, slapshot said:
i think yes, i am the first order from germany.
actual logistic chain
you are so familiar with China. congrats!!
-
@slapshot wowow. I just learn it from you. superbuy looks great for both of us. sounds good.
1. "quickmake" for him, the order is a domestic shipment. we sell it on "taobao.com" super trustable website in China
2. for overseas buyers, international shipment is between you and "superbuy"
and "quickmake" he tells me, there is a strange order to "China guangdong", because he tried to reach him, but no response. is it you?
the only problem left is whether "superbuy" is easy to use?
@GordonH85 oh I don't know oversea wechat registration is so hard. but I do have international friends in wechat
@Goran_M thank you
-
@Rossco @GordonH85 you are in the queue
"QuickQualityMake" he is quite busy this week, I mean busy with his real life work
an early start from next week, Germany order will be the first one
above is his last schedule I got. you have to understand, there is no company, no production line, "QuickQualityMake" he makes everything on his own. and he has his own personal life as well, a regular job, kids, etc. a real blood human.
"QuickQualityMake" his China Video Channel, I encourage you to look at them, ignore Chinese, enjoy music is enough
http://space.bilibili.com/323386663
I am just got informed from him that the procedure is:
1. he prepares and makes ~1.5 weeks
2. you pay directly to him, no me
3. international shipment
if you want to direct contact with him, join us "wechat", you can find "cpuwolf" is me, and I can introduce you to him via wechat
at the same time, enjoy my x-plane plugin "XTouchDownRecorder" to analyze your TBM-900 landing.
-
Tear down QGMC710
-
QGMC710 hand-on review
-
On 3/17/2019 at 10:00 AM, Goran_M said:
Very impressive work @cpuwolf
Thank you.
it is a decent job done by my friend "quickmake", he is known number one handicraftsmen in the flight simulation world in China. he designs and makes flight instruments in his own garage.
originally he works on DCS only. From last year, he starts working on X-Plane and DCS both platforms.
and "quickmake" he is not living on this, just for his hobby. so you buy it, I guarantee you earn it
quickmake his video channel in China
-
15 minutes ago, eworld said:
I'd buy it too.
Thank you for interesting on us. let's wait and see our first delivery
-
On 3/17/2019 at 5:30 AM, Rossco said:
This looks great.
Interested if you can sort your international shipping.
I'm in Australia.
What sort of cost?
we are having our first international Germany customer. and we are making a new one for him this week.
after this deal is finished, I think we can have a standard international shipment procedure.
the cost is around 120USD+ shipment fee. we are planning to control international shipment fee < 30USD. but this is what we have to learn and practice. it is UP to the delivery company we will choose, we have no plan to earn any money from this shipment fee. for QGMC710 itself is lightweight and cute for packing
VAT is your country will charge you, so we will not cover it
do you have Wechat? if you have, add me "cpuwolf", we can have IM
-
QGMC710 backlight close look
-
1 hour ago, skiselkov said:
@cpuwolf More context please. I googled for the issue and some folks have been recommending updating the display driver. Are you running an AMD GPU?
hi skiselkov, I met this issue only when I am starting a new flight with TBM-900. but it is not 100% reproducible. so I said it is sometimes.
but once it reproduced, it will pop up a window above, and I have to restart X-plane again, by high chance, it will be fine for the second boot
I will keep an eye on it. my config is 7700k+GTX980 i think it is super standard config. and I am not newbie on X-Plane
TBM home cockpit builder, let's have a loooook at new staff
in TBM 900
Posted · Edited by cpuwolf
I just tried, as I said, you have assigned wrong keys. please use "reset to default"
QGMC710 DN/UP keys can work as FLC IAS as expected in FLC mode