boeing747 Posted April 25, 2016 Report Posted April 25, 2016 that's the same error I was getting, i'm sure all this information there getting from customers will help them make a patch/update. Quote
lonewulf47 Posted April 25, 2016 Report Posted April 25, 2016 On 24.4.2016 at 9:40 PM, Litjan said: And I already have an updated XPUIPC file for you from Torsten, the creator of XPUIPC. It will add compatibility - but please make sure that you install at your own risk and neither IXEG nor X-Pilot or X-Aviation can be held responsible for any possible adverse effects of damages you might suffer herefrom. You can also wait for the next hotfix which SHOULD be live within a few hours - it will also fix the AP problems. Jan XPUIPC 2.0.4.7.zip Unfortunately this new version does not completely fix the issue. Yes, the pitch oscillations are gone, but apart from that it seems that the changes within XPUIPC have affected some other commands. In my install e.g. I use Trim assigned to my joystick's buttons. Trim up currently is not working as designed anymore. At each keypress the sim is temporarily (for the length of the keypess) paused and the trim moves only a fraction. Reinstalling the former version of XPUIPC makes the buttons working as before, however of coure brings also back the pitch oscillations.So I'm still hoping for a better fix. Oskar Quote
Litjan Posted April 26, 2016 Report Posted April 26, 2016 use the hotfix 1.01 and then you should be able to use the old XPUIPC again. Jan Quote
Capt Don Posted July 16, 2016 Report Posted July 16, 2016 My question may be a little off topic, but I hope not to bad. Anyway, I have been holding off purchasing the IXEG 737, waiting for an update to include an official fix for XPUIPC. Does anyone know if the IXEG 737 has had an update since the original release and if it included the fix for XPUIPC? Quote
Ubbi Posted July 17, 2016 Report Posted July 17, 2016 (edited) XPUIPC is working fine with the IXEG for a long time now... (as Jan stated right above your post! We are at version 1.0.7 now and there was a XPUIPC update to work with IXEG 1.0.0 (!!) and then the IXEG update since version 1.0.1 to work with the new and old XPUIPC version) Edited July 17, 2016 by Ubbi 1 Quote
marpilot Posted November 7, 2018 Report Posted November 7, 2018 So it is the latest XPUIPC working well with IXEG? 2047? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.