birdy.dma Posted June 21, 2017 Author Report Posted June 21, 2017 Good day WR269, Read first post. You will find a link to download the last file. Happy landings. 1 Quote
birdy.dma Posted July 8, 2017 Author Report Posted July 8, 2017 I did a quick test with the 1.4.1 release. Something is broken probably due to the new logics (Fuel, Hyd, right engine throttle, right generator annunciator). Starting right engine (autostart, and manual start as well), end up with a mismatch between annunciators, TO/INH, GRD OP. Please, can a dev help us, explaining what is different with the new logics, At some point, a command or a dataref is not transmited. I will investigate a little more next week, as i am not near my Lan during this WE. 1 Quote
birdy.dma Posted July 16, 2017 Author Report Posted July 16, 2017 Go to the first post. There is a new file for the 1.4.release. 1 Quote
tjh1198 Posted January 20, 2018 Report Posted January 20, 2018 Hi, which file do you place the smartcopliot.cfg In... cant get the saab to recognize that its there> Quote
birdy.dma Posted January 21, 2018 Author Report Posted January 21, 2018 (edited) Hello, The file must be in the root of the plane. You have to rename it as: smartcopilot.cfg. PS: only tested with X Plane 10 and the passenger variant. Edited January 21, 2018 by birdy.dma Quote
WR269 Posted March 19, 2018 Report Posted March 19, 2018 On 21/01/2018 at 2:20 AM, birdy.dma said: Hello, The file must be in the root of the plane. You have to rename it as: smartcopilot.cfg. PS: only tested with X Plane 10 and the passenger variant. Can anyone confirm this file still works with the new version 1.5? Quote
birdy.dma Posted March 19, 2018 Author Report Posted March 19, 2018 Hi Wiil, Should work, but let me 1 or 2 days to check: The Garmin. In this area, X Plane 10 and X plane 11 are not completely similar. Also there is may be a way to sync the 2D panel. Else, what about the new CRS1 logic? Tiller. Manual start and auto start (Because of the new PID logic). Quote
birdy.dma Posted March 20, 2018 Author Report Posted March 20, 2018 I have a problem with the hydraulic pump always running. For now, there is a workaround: disconnect, reconnect smartco. JGregory or Goran, if you read this thread, have you an idea? There is a no writable dataref, sim/operation/failures/hydraulic_pressure_ratio, which does not reach 3000 when the connection is established, and jump to this value when smartco is disconnected. At 3000, the pump stops. May be not related? Every thing else is perfect. CRS, Garmin (2D and 3D), tiller, etc smartcopilot.zip Quote
JGregory Posted March 20, 2018 Report Posted March 20, 2018 1 hour ago, birdy.dma said: I have a problem with the hydraulic pump always running. For now, there is a workaround: disconnect, reconnect smartco. JGregory or Goran, if you read this thread, have you an idea? There is a no writable dataref, sim/operation/failures/hydraulic_pressure_ratio, which does not reach 3000 when the connection is established, and jump to this value when smartco is disconnected. At 3000, the pump stops. May be not related? Every thing else is perfect. CRS, Garmin (2D and 3D), tiller, etc smartcopilot.zip If the pump is operating correctly without SC, then I have no answer for you. Is that the case, or did I misread your post? Quote
birdy.dma Posted March 21, 2018 Author Report Posted March 21, 2018 11 hours ago, JGregory said: If the pump is operating correctly without SC, then I have no answer for you. Is that the case, or did I misread your post? Yes, the pump is operating correctly without SC. There is something new since X Plane 10 and the Saab 1.41. There is no problem with this combo. Please, can you explain me the values or events involved to start/stop the pump? Thank you for your attention. Quote
JGregory Posted March 21, 2018 Report Posted March 21, 2018 5 hours ago, birdy.dma said: Yes, the pump is operating correctly without SC. There is something new since X Plane 10 and the Saab 1.41. There is no problem with this combo. Please, can you explain me the values or events involved to start/stop the pump? Thank you for your attention. The hydraulic system in the Saab is completely custom. The pump will come on as necessary to maintain pressure in the accumulator, provided there is power to the pump. You can observe this on the hydraulic pressure gauges, I cannot take the time to explain all the details of the logic behind this as it is far too complex and would take way too long. Quote
Major96 Posted March 21, 2018 Report Posted March 21, 2018 (edited) For some reason I'm getting dataref error when I try to connect to my partner, using the most updated version for 1.5. Thanks. Just for reference we can use the 1.4 version fine but with bugs. Edited March 21, 2018 by Major96 Quote
JGregory Posted March 21, 2018 Report Posted March 21, 2018 (edited) 5 hours ago, Major96 said: For some reason I'm getting dataref error when I try to connect to my partner, using the most updated version for 1.5. Thanks. Just for reference we can use the 1.4 version fine but with bugs. Please post your log files if your reporting an issue. Edited March 21, 2018 by JGregory Quote
Major96 Posted March 21, 2018 Report Posted March 21, 2018 Ok I have attached the Smart copilot logs assuming that's the correct one, If you find today's date you will be able to see the dataref errors. smartcopilot2.log Quote
birdy.dma Posted March 21, 2018 Author Report Posted March 21, 2018 3 hours ago, Major96 said: For some reason I'm getting dataref error when I try to connect to my partner, using the most updated version for 1.5. Thanks. Just for reference we can use the 1.4 version fine but with bugs. Sorry, i have no time now. Will reply tomorrow (for me zulu + 1 h), and provide a new good file. Quote
birdy.dma Posted March 22, 2018 Author Report Posted March 22, 2018 11 hours ago, Major96 said: Ok I have attached the Smart copilot logs assuming that's the correct one, If you find today's date you will be able to see the dataref errors. smartcopilot2.log Good day, You must have same : Release of X Plane, Saab, BetterPushback (or no BP at all). Bp is probably the culprit. Only a small bug with the digit lights. The knob can be turned by the master only. If I share this knob, it automagically turns full right. May be because it’s minimum value is never 0. Some thing is specific with this one, I don’t understand what (it’s the brightness of the GPS, NAV/COM, XPNDR). PS: don’t assign any axis to the condition levers. Mouse only. smartcopilot.zip Quote
Major96 Posted March 23, 2018 Report Posted March 23, 2018 Thanks for the fix however the slave of the connection losses a engine or both, not sure if this is a know problem or if we are doing something wrong, but this seems to be a issue on every flight we do. Quote
birdy.dma Posted March 23, 2018 Author Report Posted March 23, 2018 (edited) 2 hours ago, Major96 said: Thanks for the fix however the slave of the connection losses a engine or both, not sure if this is a know problem or if we are doing something wrong, but this seems to be a issue on every flight we do. I have no specific idea. As usual, conflict plugins (mainly XPUIPC, FWL), X Plane failures, a switch assigned to something wrong and unannounced, an assignment to a condition lever. Launch a speed test: http://legacy.speedtest.net/ The best upload will be the master. If your connection is established thru Hamachi, try a direct connection with the Wan IP. If necessary, redirect port 56897 from you box to your computer. Check your fps: 25 fps or above. No AI planes with plugin (select only stock planes). Edited March 23, 2018 by birdy.dma Quote
birdy.dma Posted March 30, 2018 Author Report Posted March 30, 2018 Again, better with AP: https://sky4crew.com/download/ Quote
birdy.dma Posted December 23, 2019 Author Report Posted December 23, 2019 An update for Smartco 3.1.0 and the 1.51 release. https://sky4crew.com/smartcopilot-3-1-released/ https://sky4crew.com/download/saab-340a-1-3-2017-06-21/ Quote
jorca01 Posted June 11, 2020 Report Posted June 11, 2020 Hi would it be possible to get a config file for the Carenado Saab 340B? Quote
birdy.dma Posted June 12, 2020 Author Report Posted June 12, 2020 On 6/11/2020 at 7:43 AM, jorca01 said: Hi would it be possible to get a config file for the Carenado Saab 340B? Hi, Not by me, i am a LES pilot. FYI, i will update the file as soon as the LES Saab is updated. Aside note: Is it the good place for such a request? Quote
birdy.dma Posted February 22, 2021 Author Report Posted February 22, 2021 My smartcopilot.cfg is updated for the 1.6 release and smartco 3.1.4. A little regression: i am not able to sync the GPU. If needed, both pilots will call it. Averything else is much better than before. If fact the plane is much better. SAAB 340A 1.6 ⋆ Sky4Crew 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.