Rexxxy77 Posted December 2, 2013 Report Posted December 2, 2013 This might not be an v1.3 update issue but I thought I'd try this old beast out. Batteries onFuel pumps onFuel selectors are both set to main left/rightMixture full richProp full forwardThrottle 1/3 forwardleft ignition offright ignition to both magnetosPress the ignition switch and hold for 20sec......nothing What all important step have I missed? Thanks in advance
Rexxxy77 Posted December 2, 2013 Author Report Posted December 2, 2013 Hmmm the plot thickens, some of my other aircraft in my hangar won't start either. Grumman Goose won't start, LES Duchess won't start. Diamond DA-42 will start but no animation of right propeller???? All my default aircraft start, so too with the Carenado's. I will admit I installed a few updated A/C lastnight and bought a few. Is it possible there is some odd conflict? I updated the LES DC3 and the Grumman Goose package from the org. Bought the Seamax from X-Aviation (which still works fine) Bought the JarDesign A320 Neo V2 and Diamond DA42 both of hich worked fine lastnight, DA42 has issue toight as mentiond above. Both LES products aren't starting, I will try the SAAB and report back.
Rexxxy77 Posted December 2, 2013 Author Report Posted December 2, 2013 CRAP, the SAAB won't start either, engine will only go to 20% 32 degrees temp (yes condition levers are in start position)
Rexxxy77 Posted December 2, 2013 Author Report Posted December 2, 2013 When in doubt re-start X-plane, so far so good. Still concerning though. Any thoughts guys?
Goran_M Posted December 2, 2013 Report Posted December 2, 2013 Yeah. You broke somethin'. If the Duchess won't start, then it's definitely something to do with X-Plane (that's why the restart worked. The Duchess has no code).
w9nwrwi Posted December 2, 2013 Report Posted December 2, 2013 I have somewhat of the same problem since upgrading to the new version. 1. I find the Magneto switch(s) will not or are extremely hard to switch to Both. 2. The Ignition switch will not toggle the engines to crank. 3. I now have no Indicated Air Speed. Checked by starting my location at 3 miles out. An adjunct program (Plan-G) does show my air speed. Can anyone else confirm this??? Chuck
Goran_M Posted December 2, 2013 Report Posted December 2, 2013 ChuckCan you confirm that it is the wheels variant you are seeing this in?
w9nwrwi Posted December 2, 2013 Report Posted December 2, 2013 (edited) Goran, Looked a bit closer, here is what we have. On the ground both variants. Cannot turn either magneto switches, turning circle is there, but no amount of dragging will turn the switches. To check the following I used a "location" & "3 minute out." Wheels varient: No Indicated Air Speed reading. Dial at 0. No 2 minute turn indication -------------No Vertical rate of climb indication ( + or -)------->-EDIT: Now working--just came out of pause. No Baro alt adjust Both pilot and copilot positions show the same thing. Floats varient: All indications are the same as wheels with the exception of the Vertical rate of climb indication which is working. Was hoping that someone else could check and see if the same thing is going on. Chuck Edited December 2, 2013 by w9nwrwi
Goran_M Posted December 2, 2013 Report Posted December 2, 2013 We're still investigating. Nothing has changed with regards to animations in the cockpit, so it's either in the reworked scripts or the new version of Gizmo.We're still looking into it and we'll have a fix very soon.Again, my personal apologies. 1
Cameron Posted December 3, 2013 Report Posted December 3, 2013 Chuck, Something really seems amiss with your install. Things like Airspeed definitely work.... Can you post a log file for us?
w9nwrwi Posted December 3, 2013 Report Posted December 3, 2013 Cameron, Log.txt attached I see a problem within it: Fetching plugins for C:\Users/Charles/Desktop/X-Plane 10/Resources/pluginsLoaded: C:\Users/Charles/Desktop/X-Plane 10/Resources/plugins/PluginAdmin/64/win.xpl.C:\Users/Charles/Desktop/X-Plane 10/Resources/plugins/Gizmo64.plugin/64/win.xpl : Error Code = 126 : The specified module could not be found.Loaded: C:\Users/Charles/Desktop/X-Plane 10/Resources/plugins/SeaTraffic/64/win.xpl. Looks like Gizmo could not be found. Log.txt
w9nwrwi Posted December 3, 2013 Report Posted December 3, 2013 (edited) Cameron, Gizmo appears in the X-plane Resouces plug-in directory, but does not appear in the sim; Plugin/Plugin Admin/Plugin Information. Gizmo Log.txt attached.GizmoLog.txt Edited December 3, 2013 by w9nwrwi
Rexxxy77 Posted December 4, 2013 Author Report Posted December 4, 2013 FYI I have not had any other issues, must have been a glitch
Cameron Posted December 5, 2013 Report Posted December 5, 2013 Cameron, Log.txt attached I see a problem within it: Fetching plugins for C:\Users/Charles/Desktop/X-Plane 10/Resources/pluginsLoaded: C:\Users/Charles/Desktop/X-Plane 10/Resources/plugins/PluginAdmin/64/win.xpl.C:\Users/Charles/Desktop/X-Plane 10/Resources/plugins/Gizmo64.plugin/64/win.xpl : Error Code = 126 : The specified module could not be found.Loaded: C:\Users/Charles/Desktop/X-Plane 10/Resources/plugins/SeaTraffic/64/win.xpl. Looks like Gizmo could not be found. Log.txt I believe I have found the issue for this. Please re-run the DC-3 installer. This will force it to re-download latest components, and update what I believe to be the missing module.
w9nwrwi Posted December 5, 2013 Report Posted December 5, 2013 (edited) Cameron, I do not have a file named DC-3 install. Is there a file with that actual name and should it be under X-Aviation? See edit below Would you pefer a DC-3 Uninstall (which I see) and a new download & Setup run? See edit below EDIT: I got it working now Cameron. I invoked my backup on a flash stick, the Setup.exe, when It asked if I wanted to delete my copy of DC-3 I told it no.I watched the process and saw the Gizmo file whiz by as it picked up what was missing. Checked it out quickly and so far so good, all gauges and yoke anitmation works, auto pilot seems ok now also.The only problem I have is I cannot get those darn magneto switchs to toggle from cold and dark. The right one goes over fairly easy but the left is a no-go.Will continue to see if I can get it to work. Chuck Edited December 5, 2013 by w9nwrwi
Recommended Posts