Jump to content

Recommended Posts

Posted

So after a couple weeks of development, I have a few screenshots of an airport I've been working on. The airport is Lebanon Municipal Airport. It's the closest airport to me, and I spent a lot of time there as a kid watching planes take off and land. I've also flown out of this airport a couple of times, and I thought it deserved some decent scenery. I don't know much about developing, and I'm learning as I go. It's a fun experience and after seeing my first custom created object in X-plane, I am excited to keep working on this. I chose to do the hardest building first, the Signal Aviation Building. The roofs were a pain in the rear end to figure out in sketchup and the stairs/railings were not easy either.

Here is a list of what needs to be completed and what is completed so far:

Completed:

Airport layout (taxiways, runways, lines, PAPI's VASI's etc.)

Signal Aviation Building/Hangar

To Do:

Terminal

Three Hangars

Texturing of all custom objects

Lighting

Populating the airport with opensceneryx objects and what not

So there is a lot to do but I would really like to complete this project. At the moment I have a lot of free time but that will change soon. Progress will probably be very slow over the winter, but I would like to have this out by the end of the winter. We'll see. I'll update this thread when I can! For now, enjoy the screenshots!

post-8098-0-69474400-1350801941_thumb.pn

post-8098-0-22529700-1350801968_thumb.pn

post-8098-0-51023100-1350801999_thumb.pn

post-8098-0-11328800-1350802044_thumb.pn

post-8098-0-93655200-1350802105_thumb.pn

post-8098-0-58841000-1350802180_thumb.pn

post-8098-0-40825000-1350802138_thumb.pn

  • Upvote 1
Posted

I'll be watching this one. While I don't fly X-Plane hardly at all, I've "driven by" KLEB on 89 countless numbers of times and have a soft spot for it. I'll grab this once it's done for certain.

Good luck!

Posted

I've "driven by" KLEB on 89 countless numbers of times and have a soft spot for it.

I have a soft spot for this airport as well. I thought it deserved to be done correctly so that's what I'm trying to do. At the moment I'm adding windows to the sketchup version of the signal hangar so I can texture it. I'm also trying to figure out how to add custom lights as the flood lights around the GA area are part of the Signal hangar. That's causing some delays as I don't have a really good idea of how to do it. I'm doing a lot of research to figure that out. Good news is that once the signal hangar is totally complete, this project should fly right along.

  • 3 weeks later...
Posted

More work on the signal hangar: So far, I'm happy with what I've come up with. I've finished drawing the outlines for the windows, vents and doors... and now I've got housings for the lights! I plan to make lights using Marginal's plug-ins for sketchup. I haven't attempted this yet, but I will soon. Maybe in the next few days. This could take up a large chunk of the time that will be needed to create the signal hangar because I've never made custom light cones before, and I need to find a way to turn the lights off during the day and on at night. If anyone has any tips on that, don't hesitate to send me a message! This will be freeware :)

Here are a couple shots of the completed... lets say "base model" :) All that's left is to figure out the lights and texture it! Then it's on to the next building.

post-8098-0-12455200-1353212737_thumb.pn

post-8098-0-76076100-1353212763_thumb.pn

  • 2 weeks later...
Posted

haha kaphias, Nice joke ;)

 

Thank you Peter! The signal building has a TON of windows so I had to be careful with my selection of the window texture. I'm glad you like it!

 

The Signal Aviation Building is now complete! I'll be working from right to left, so the next object will be the Sharky's helicopter hangar. Enjoy some screenshots for now!

 

-Nick-

 


post-8098-0-36138300-1354481297_thumb.pn

post-8098-0-07173300-1354481330_thumb.pn

post-8098-0-58349000-1354481353_thumb.pn

post-8098-0-77736800-1354481376_thumb.pn

Posted

I've started to populate the area around the signal building with planes, gas tanks and small huts. The objects I've placed are as close to the real buildings that populate the airport as I could find.

 

I have one more hangar to make for that area as well as the control tower. I wasn't pleased with any of the towers available to me, so I'll be making my own! Once this area is finished about half of the airport will be complete!

 


post-8098-0-90621400-1354576728_thumb.pn

  • Upvote 1
Posted (edited)

More work has been completed! All of the hangers around the Signal area are complete. That leaves the tower and then I can start work on the southern part of the airport. It's coming together quite nicely so far and I'm pleased with what's happening. I think the tower will add a lot to the northern end of the airport though, I plan to take my time on that and make it look as good as I can. We'll see what happens!

 

Things may start to get considerably slower. I have other things going on, just like everyone else does :) , that are calling me so scenery development will have to take it's place on the side for now. Don't worry, I'm not giving up on this! I will do what I can, when I can, but it may take a while until it's complete. Somewhere around February or March... maybe! :) I have every intention of finishing this airport because I have a love of aviation as well :) I will post updates when I can!

 

So for now, Enjoy some pictures of the airport in it's current state :)

 

 

post-8098-0-60876500-1355044676_thumb.pnpost-8098-0-44502600-1355044686_thumb.pnpost-8098-0-55254200-1355044695_thumb.pnpost-8098-0-33733200-1355044705_thumb.pnpost-8098-0-44940200-1355044712_thumb.pnpost-8098-0-17459100-1355044723_thumb.pnpost-8098-0-54770600-1355044732_thumb.pnpost-8098-0-03687800-1355044744_thumb.pnpost-8098-0-79842600-1355044754_thumb.pn

post-8098-0-29472200-1355044614_thumb.pn

post-8098-0-85623700-1355044638_thumb.pn

Edited by skiflyzander
  • Upvote 1
  • 3 weeks later...
Posted

I've been slowly plugging away at the tower. I'm taking my time with this one to see what kind of detail I can add. We'll see how long that lasts :)

If you're wondering why there is no surface between the frames of the door, it's because it's glass. I'd like to add opaque surfaces, but I'm not exactly sure how to do that right now. I'll probably have to look that up.

 

Enjoy some screens for now.

post-8098-0-53535100-1356554098_thumb.pn

post-8098-0-07403400-1356554110_thumb.pn

Posted

I've been slowly plugging away at the tower. I'm taking my time with this one to see what kind of detail I can add. We'll see how long that lasts :)

If you're wondering why there is no surface between the frames of the door, it's because it's glass. I'd like to add opaque surfaces, but I'm not exactly sure how to do that right now. I'll probably have to look that up.

 

Enjoy some screens for now.

attachicon.gifScreen Shot 2012-12-26 at 9.29.28 PM.png

attachicon.gifScreen Shot 2012-12-26 at 9.29.37 PM.png

 

I have no clue how to use your 3d software but I can show you in Modo how to do it.  PM me and we can hook up.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...