Jump to content

Recommended Posts

Posted (edited)

Hi All,

Not fully ready yet but I've put together a W&B and performance calculations Google spreadsheet, based on the 4 blades AFM.

W&B payload stations are listed as I configured them in Planemaker. Since we can only have 9 stations, it's missing some of them.

Performance results so far look pretty ok. I'm cross checking them with ForeFlight performance profiles for the MU2 and I'm getting +/- 10 Lbs in terms of fuel.

Happy to share if that could be handy when adjusting the flight model in future versions!

Cheers!

Screenshot 2023-05-30 at 14.55.23.png

 

Screenshot 2023-05-31 at 11.19.32.png

Edited by arctic85
Posted

The percentage calculations are incorrect   ;)
For example: "Expected climb distance = 21", "Actual climb distance = 19". The difference is not 90.48%, but 15.79%: (21-19)/21*100 = 15.789...%.
Similarly for "Expected time = 7" and "Actual time = 7", the difference is 0%, not 100% : (7-7)/7*100 = 0%
And so on. Or you give a different meaning to the "Diff" value...   ;)

Posted (edited)

Yes I know :-). Just did a quick percentage between the expected and actual, took a screenshot and went to bed. Still WIP but screenshot is updated.

For my next flight, I'll configure data outputs from X-Plane so I can grab numbers more precisely. Let's see how it looks like. But as some other users have already noticed and reported here, fuel flow in cruise is approx 14% below expected value (TAS too low as well) and seems too high on ground/lower altitude. Because in the end, using the AFM to calculate the necessary amount of fuel is pretty close to what we get in X-Plane MU2. It just burns more fuel in climb and descent/approach phases and less in cruise.

It terms of climb performances, it seems to be quite right, just ~5% overpowered, again based on AFM as I've never flown an MU2. Though if I win the lottery, I would love to buy one, it just looks awesome :)! Unfortunate they are discontinued, they are so much prettier than a King Air...

Edited by arctic85
  • Upvote 1
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...