[CLOSED 2327] CTD when MFD checklist is on Quick turn around

[hikariken]

I have tried to use the quick turn around checklist on the MFD in a two leg flight today. However when used the checklist item check button (for the one the F/O is reading) by mistake it caused a crash to desktop for Xplane.

unfortunately I repeated the mistake several times causing each time a CTD

while I guess the button for the oral checklist given by the F/O is not supposed to work in this particular case (using a normal checklist different from those handled by the F/O support) the CTDs are pretty bad.

[Pils]

Please post your Log.txt for analysis! Thanks.

[hikariken]

I have recreated the incident again and here is the log.

steps I used to recreate the CTD from a new cold and dark flight.

• Batt master on
• APU and APU gen on
• APU LCV and 10th stage isol open
• REV armed
• Nav and logo lights on
• Launched cabin check checklist
• check all items through the mfd controls (if the lines are white it does return to it if you press the checklist/check_item binding)
• at the end of the checklist use the mfd control pannel to go to the "next normal checklist" by scrolling to the line on the mfd and pressing the rotary knob. MFD should show the "quick turn checklist" (but I had the CTD with the "immediate retrun" checklist too)
• at any point in the cheklist use the checklist/check_item binding

I have the following results :

• F/O says "engine start checklist next"
• X-plane crash with the Xplane crash report prompt

Log.txt

 

CL650_Log.txt

Edited February 13, 2022 by hikariken

[CaptCrash]

Hi, It looks like you are using version 1 of the CL650, currently 1.4.1 is the latest version, please update to the latest version and try to duplicate the issue. Thanks

[CaptCrash]

Disregard the above. I made an error reading the log. Can you reproduce the crash and if so can you please provide the steps needed to do so?

[CaptCrash]

This is a known issue currently and will be addressed when the checklist system is fully rewritten in a future update. Apologies for the crash