[SOLVED] R Window Heat caution popping up several times during cruise despite resetting it

[Karl_Marx]

I am currently doing a transatlantic flight and during cruise the "R Window Heat" kept showing up as a caution item every now and then, even after turning off and on the switch. I also located the CB (F14 and F15) and tried pulling out and In, with no results. 

[Karl_Marx]

So I reloaded the aircraft and did a windshield/window test on the ground while being parked, which it shows that there is a failure with the R Window Heat. I have attached all the necessary logs for you, and I am happy to provide more info if needed

 So far I have tried:

-Resetting the circuit breakers in concern (F15 circuit breaker)

 

 

-Setting the R Window Heater to be triggered and then clearing the failure in that window

 

-Analysing in the electrical study panel to see if there is any current flowing through, and there is (pointing to maybe a short-circuit?)

 

CL650_Log.txt Log.txt

[Graeme_77]

Check this CB please. You may need to recycle the window heat switches after resetting it.

 

Edited January 21, 2022 by Graeme_77

[Karl_Marx]

Solved!

 

Checked and apparently it was popped out. Resetting it makes it working now, it happened probably because of pilot error. I will do a longer flight just to check how it goes but it should be fixed now.

 

Many thanks!