[Solved] Go-Around Procedure?

[dlrk]

What is the procedure for a go-around?

Edited January 8, 2022 by oisintierney

[ois650]

1) ATS Disengage - Advance thrust levers

2) Retract flight spoiler if in use

3) Pitch up smoothly at no less than vRef speed

4) Fly V2 + 10 minimum and retract flaps to 20

5) Fly MAP or as instructed by ATC

[dlrk]

Should that be vFTO + 10?

[ois650]

I am only going off the manufacturer's guidance which states V2. 

[dlrk]

There isn't a landing V2 speed though

[Graeme_77]

Vac is basically the same thing as V2 in this context. Missed-approach climb speed for flap configuration with critical engine inop. 

[Orion23]

I did a go-around earier today, seems like FO would do some check list during the go-around, and the landing checklist will be pasued. However, after go-around I retract the landing gear by myself as well as the flaps, during the second approach the FO doesn't seems undertand I wanted to land, I contiuned with landing checklist and put the gear down, the FO was still in the go-around mode and help me retract my gear and set flaps to 20. Is this a bug or I should skip to the next checklist after go-around?