Highergrounds Posted May 13, 2020 Report Posted May 13, 2020 Hi, I've been experiencing random CTDs when using the TBM900. I'm unable to find a pattern as to when it happens. Today I've had 2 CTDs. One was during the before startup checklist (engine not yet running), and one in flight. The conditions were fairly similar: Same airport and same route. I have attached my log. Thanks in advance Log.txt Quote
Highergrounds Posted May 13, 2020 Author Report Posted May 13, 2020 Tried again (at the same airport), and this time it crashed during takeoff. I tried the same departure with another addon aircraft and had no issues. Btw with CTD I mean that x-plane becomes unresponsive and when I click the window I get a popup from Windows asking if I want to terminate the application. I tried waiting for 5 minutes but that did not change anything. Quote
Goran_M Posted May 13, 2020 Report Posted May 13, 2020 Does this happen at different airports or just EHAM? Quote
Highergrounds Posted May 14, 2020 Author Report Posted May 14, 2020 Right, I failed to specify that: It happens at random locations. My last 3 tries were at EHAM, but I've had it happen mid flight at FL200 a few times and at other airports as well. The problem is that it is fairly inconsistent to reproduce. Sometimes all goes well for a few flights and then suddenly it hangs. Quote
Goran_M Posted May 14, 2020 Report Posted May 14, 2020 As a first test, can you make sure AI traffic is turned off. Also, if you normally operate the sim in full screen mode, can you try in Windowed mode? Quote
Highergrounds Posted May 14, 2020 Author Report Posted May 14, 2020 I thought I had AI traffic turned off... When I start a new flight and I click the "AI aircraft" button there are none. Or is there some other checkbox I need to uncheck? I'll try windowed mode. Quote
Highergrounds Posted May 14, 2020 Author Report Posted May 14, 2020 (edited) I've tried windowed mode. So far so good. It was only one flight though, and as I said, it does not happen every flight. I'll keep flying in windowed mode and report back if I encounter another crash. Also, windowed mode takes a lot of immersion out of the experience. Any chance that this will get fixed? Edited May 14, 2020 by Highergrounds Quote
Goran_M Posted May 15, 2020 Report Posted May 15, 2020 The way around windowed mode taking away a lot of the immersion is to have another window open behind X-Plane. Then you should be able to fly full screen. This is just the way AMD drivers work, and it is completely out of our control. Quote
Highergrounds Posted May 23, 2020 Author Report Posted May 23, 2020 I changed to windowed mode and it went fine for a few flights but tonight I had another hang. Logfile is attached. Any other ideas? Thanks in advance Log.txt Quote
Goran_M Posted May 23, 2020 Report Posted May 23, 2020 18 minutes ago, Highergrounds said: I changed to windowed mode and it went fine for a few flights but tonight I had another hang. Logfile is attached. Any other ideas? Thanks in advance Log.txt Looks like corrupted scenery at EHAM. Is your EHAM scenery 3rd party or default? Quote
Highergrounds Posted May 23, 2020 Author Report Posted May 23, 2020 Are you saying that because of the "E/ATC: OH BOY! EHAM SEEMS TO MAYBE HAVE A ONE-WAY PATH TO A DEAD-END!" lines in the log. At first that worried me to but according to this thread on the x-plane forums it would not cause a crash: https://forums.x-plane.org/index.php?/forums/topic/198788-x-plane-1141-multiple-hard-crashes/ I also don't remember installing addon scenery for EHAM. Attached is a screenshot of the event in the event viewer, in case it could help. Quote
Goran_M Posted May 23, 2020 Report Posted May 23, 2020 The only reason I'm suspecting it's your scenery is because the scenery is the final entry in your log file and the TBM uses a terrain radar. If it reads a bad scenery tile or region, it has the potential to crash. An easy method to verify this is to do the same flight 1 or 2 more times over the same scenery. If it crashes both times, it's all but verified that the scenery is the problem. Quote
Highergrounds Posted May 23, 2020 Author Report Posted May 23, 2020 I'll try the exact same route tomorrow. I'll report back with the results. Quote
Highergrounds Posted May 24, 2020 Author Report Posted May 24, 2020 Tried the exact same route today and experienced another hang. Not at the same location though. I would think that if it is a scenery issue it would happen at the same place. Anyway, I've decided I'm going to get out the big guns and do a complete reinstall of x-plane and only install the tbm as addon. We'll see how that goes. Quote
Highergrounds Posted May 24, 2020 Author Report Posted May 24, 2020 After reinstalling x-plane and only the tbm as addon I got a bit futher into the flight. This time the hang occurred on final for RWY 25L at EDDF. Log is attached (I doubt it will be useful, the last entry in the log was about 30 minutes before the crash. Just out of curiosity: Would it be possible to obtain a refund? I really want this to work out, but I am running out of ideas... Log.txt Quote
Highergrounds Posted May 24, 2020 Author Report Posted May 24, 2020 I received a tip from someone over at the x-plane forums. Apparently it is a bad idea to install x-plane at the root of your C: drive. Which is exactly what I had done. Reinstalled it again, on the desktop this time. No crashes yet. Quote
divinglyc Posted May 28, 2020 Report Posted May 28, 2020 Hi! I am also having frequent CTD with the latest version of TBM + XP 11.41 stable version. It happens usually within one minute after loading the plane. Here is my Log.txt. Please help me, thanks a lot!! Log.txt Quote
Goran_M Posted May 28, 2020 Report Posted May 28, 2020 7 hours ago, divinglyc said: Hi! I am also having frequent CTD with the latest version of TBM + XP 11.41 stable version. It happens usually within one minute after loading the plane. Here is my Log.txt. Please help me, thanks a lot!! Log.txt Turn off any AI you have running. We're trying to figure out why this is happening with co-operation from Laminar. 1 Quote
divinglyc Posted June 1, 2020 Report Posted June 1, 2020 On 5/29/2020 at 6:42 AM, Goran_M said: Turn off any AI you have running. We're trying to figure out why this is happening with co-operation from Laminar. Thanks! Goran, When you say AI do you mean some plugin like X-life, GroundTraffic or MarineTraffic? Quote
Goran_M Posted June 1, 2020 Report Posted June 1, 2020 Anything to do with air traffic. I think World Traffic from Just Flight works with the TBM without crashing. They reached out to me about 1-2 months ago and asked for a copy of the TBM to somehow code their AI so it doesn't crash when run with the TBM. I haven't heard any problems with their version of traffic. X-Life WILL crash with the TBM, as will the default AI traffic. 1 Quote
moespeeds Posted June 2, 2020 Report Posted June 2, 2020 I get CTD when switching between VR and flat screen after the aircraft is loaded, or when entering the x-plane flight config menu from vr. Can't find a pattern, I'll test some more and look over the log files. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.