ccbryant Posted December 21, 2018 Report Posted December 21, 2018 Hi guys, Have you found a issue the the TBM900 that from the cold and dark process, there is no map in MFD. the MFP is black but the checklist was shown. The version is 1.13, xplane version is 11.30R1 Quote
ccbryant Posted December 22, 2018 Author Report Posted December 22, 2018 On 12/21/2018 at 3:35 PM, Goran_M said: Can you post a screenshot? Expand Hi Goran, Here is the screenshot. Quote
Goran_M Posted December 22, 2018 Report Posted December 22, 2018 Did you try repairing it in the maintenance manager? Quote
ccbryant Posted December 22, 2018 Author Report Posted December 22, 2018 On 12/22/2018 at 2:59 AM, Goran_M said: Did you try repairing it in the maintenance manager? Expand It is useless. I reinstalled and retrid, there was still no map displaying Quote
Goran_M Posted December 22, 2018 Report Posted December 22, 2018 No, I mean did you try to repair it using the TBM maintenance manager. While on the ground, open the TBM side bar on the lower left, and click maintenance manager. Go to avionics, and click "Access". Is anything "broken" on the MFD? Quote
ccbryant Posted December 22, 2018 Author Report Posted December 22, 2018 On 12/22/2018 at 6:14 AM, Goran_M said: No, I mean did you try to repair it using the TBM maintenance manager. While on the ground, open the TBM side bar on the lower left, and click maintenance manager. Go to avionics, and click "Access". Is anything "broken" on the MFD? Expand Yes i understood. I have tried this to make everypart was new but it was useless.i also tried to reinstalled and it caused same situation Quote
Goran_M Posted December 22, 2018 Report Posted December 22, 2018 Have you tried creating a new airframe? If this doesn't work, then post your log.txt file. Quote
ccbryant Posted December 22, 2018 Author Report Posted December 22, 2018 On 12/22/2018 at 6:38 AM, Goran_M said: Have you tried creating a new airframe? If this doesn't work, then post your log.txt file. Expand Just tried. cannot work Here is my log txt Log.txt Quote
Goran_M Posted December 22, 2018 Report Posted December 22, 2018 Can you remove all plugins, except Gizmo, and try again? Quote
Mateyhv Posted December 22, 2018 Report Posted December 22, 2018 And maybe also check your XP aircraft failures. I have had occasions when the maintenance was showing everything OK but failures being reported on XP failure list. Once checked worked OK. Quote
ccbryant Posted December 23, 2018 Author Report Posted December 23, 2018 On 12/22/2018 at 8:57 AM, Goran_M said: Can you remove all plugins, except Gizmo, and try again? Expand remove all plugins and cannot work Log.txt Quote
ccbryant Posted December 23, 2018 Author Report Posted December 23, 2018 On 12/22/2018 at 1:33 PM, Mateyhv said: And maybe also check your XP aircraft failures. I have had occasions when the maintenance was showing everything OK but failures being reported on XP failure list. Once checked worked OK. Expand Tried that. cannot work Quote
Goran_M Posted December 23, 2018 Report Posted December 23, 2018 Then it's possible you don't have all files installed to display the MFD. Can you try running the X-PLANE installer (Not the TBM installer) and that will install any missing files. Quote
ccbryant Posted December 23, 2018 Author Report Posted December 23, 2018 On 12/23/2018 at 8:00 AM, Goran_M said: Then it's possible you don't have all files installed to display the MFD. Can you try running the X-PLANE installer (Not the TBM installer) and that will install any missing files. Expand Will try. BTW ,here is the TBM 900 log txt. Dun know whether it will be any information about that TBM900_Log.txt Quote
ccbryant Posted December 23, 2018 Author Report Posted December 23, 2018 On 12/23/2018 at 8:00 AM, Goran_M said: Then it's possible you don't have all files installed to display the MFD. Can you try running the X-PLANE installer (Not the TBM installer) and that will install any missing files. Expand Hi Goran, It cannot work. I will completely reinstall the xplane and to check. I have bought it for several days and cannot enjoy it until now Quote
Goran_M Posted December 23, 2018 Report Posted December 23, 2018 I can understand your frustrations. Rest assured, this is definitely something on your end, because we haven't had anyone have any issues like this. My advice is to install a clean copy of x plane, no plug ins and no scenery and use that for testing purposes. Install the TBM in there and as you say, see what happens. Quote
snapshot21 Posted December 23, 2018 Report Posted December 23, 2018 Ive had this issue with another aircraft, Can you try to map a key to "avionics toggle" and press that? Quote
ccbryant Posted December 23, 2018 Author Report Posted December 23, 2018 On 12/23/2018 at 11:42 AM, snapshot21 said: Ive had this issue with another aircraft, Can you try to map a key to "avionics toggle" and press that? Expand Oh my god. My hero, thank you very much. It worked But it is very strange the tbm900 needs avionic toggles to display the map. other aircafts of mine never met this issue. Quote
ccbryant Posted December 23, 2018 Author Report Posted December 23, 2018 Hi Goran, I just realise the reason of this issue. Maybe not right. I always turn on the main power swicth(crash up ) and battery on at the same time. Then there was no map. I carefully watched some videos that battery switch should be turned on after warning on PFD. I will try this tmr to check this 1 Quote
snapshot21 Posted December 23, 2018 Report Posted December 23, 2018 (edited) On 12/23/2018 at 1:52 PM, ccbryant said: Oh my god. My hero, thank you very much. It worked But it is very strange the tbm900 needs avionic toggles to display the map. other aircafts of mine never met this issue. Expand Something is causing your avionics switch to initialize in the off position. Mine was caused by setting PFC serial port yoke to on in the controllers section (did it to remove mouse yoke). It has a toggle switch for avionics master and since I really dont have the yoke, the dataref for avionics master is automatically reverting to the off position, which caused the issue. I suggest finding what is fiddling with your avionics master. Edited December 23, 2018 by snapshot21 Quote
ccbryant Posted December 23, 2018 Author Report Posted December 23, 2018 On 12/23/2018 at 2:54 PM, snapshot21 said: Something is causing your avionics switch to initialize in the off position. Mine was caused by setting PFC serial port yoke to on in the controllers section (did it to remove mouse yoke). It has a toggle switch for avionics master and since I really dont have the yoke, the dataref for avionics master is automatically reverting to the off position, which caused the issue. I suggest finding what is fiddling with your avionics master. Expand Thank you for your suggestion. Merry Christmas Quote
ccbryant Posted December 24, 2018 Author Report Posted December 24, 2018 On 12/23/2018 at 2:04 PM, ccbryant said: Hi Goran, I just realise the reason of this issue. Maybe not right. I always turn on the main power swicth(crash up ) and battery on at the same time. Then there was no map. I carefully watched some videos that battery switch should be turned on after warning on PFD. I will try this tmr to check this Expand Oh my god, it was not the reason. I just carefully followed the startup introduction. Quote
Goran_M Posted December 24, 2018 Report Posted December 24, 2018 So you're STILL not seeing the MFD in it's entirety? Quote
ccbryant Posted December 24, 2018 Author Report Posted December 24, 2018 On 12/24/2018 at 1:14 AM, Goran_M said: So you're STILL not seeing the MFD in it's entirety? Expand I can see it now by pressing avionics toggles which i defined a key for xplane, as snapshot21 suggested. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.