Jump to content

Recommended Posts

Posted

the fuel remaining on the g1000 shows the wrong amount ,way lower than fuel in tanks,it seems like its reading one tanl in the tbm 900

is this default xplane g1000 issue or tbm900

thanks for reply

  • Upvote 1
Posted

You are right, today  I flew for 1000nm (3.5 hrs) and at top of descend it showed - 120 lb (?) while I had 130 gallons onboard (finished with 120 gal).

Ii was bete7 test, but I think in xp11.26 it was also an issue.

Love that plane anyway :)

Cheers

Posted

The fuel calc is F'ed... and it's something in the xplane interface on the G1000.

I calculate fuel using simbrief.com and I look at the GPH in flight... to figure out what my optimal cruise N2 has to be... usually between 95 and 99% depending on the ISA and the altitude.

The CUM on the G1K in Xplane is basically correct... so I look at the GPH and look at the CUM time to destination... and do some quick math... I know in gallons how much the 45-minute reserve is... (or whatever you're flying)... and I usually add in a 20-minute route contingency as well...  again - simbrief can do all this for you. Simbrief can also give you like the basic TOD/BOD and ascendency parameters as well... it's a nifty little planning tool for sims if you haven't seen it...

(it's similar in many respects to professional IFR planners... but simbrief cannot be used in any way for real navigation...)

It seems like if the journey is more than like 700 nm... your G1000 calculations are going to show you always bingo (or less) fuel... in the Vision Jet... if you fly from KMSP to KORD or KPWK... the fuel it says will be remaining is off by as much as 100%.... 

The little fuel rings (the green band ring and the green and black ring) are also dicked up... again... I presume that's Xplane and not Hotstart... since I see it in other aircraft.

Bryan

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...