Jorge Uvo Posted November 3, 2018 Report Posted November 3, 2018 Hi guys. I recorded a quick video showing a bug with IXEG cockpit, after update X-Plane to 11.30b2. Until 2 days ago I was running X-Plane 11.30b1 and IXEG was running fine. I already tested with Flight Factor 777 and 757, also with default C172 and BE9, and all them are working fine on 11.30b2. Finally I reinstalled the IXEG and the issue persistes. I know that IXEG might say that they doesn't provide support on beta versions, but I am just looking for a workaround, instead of restore my back up of X-Plane in the last stable version. Is anyone else facing the same issue? IXEG_x_11_30.mov Quote
Ben Russell Posted November 4, 2018 Report Posted November 4, 2018 Bugs with beta releases of X-Plane should be reported to Laminar. They broke it. Quote
Litjan Posted November 4, 2018 Report Posted November 4, 2018 Thanks for the report - I don´t think I saw that with beta 2, but I only tested it very briefly. It MAY be specific to your hardware, but I will doublecheck my installation again (I may not have panned around enough). So far this is the only report about this I heard. But please report it to LR nonetheless! Thank you, Jan Quote
Jorge Uvo Posted November 5, 2018 Author Report Posted November 5, 2018 20 hours ago, Litjan said: Thanks for the report - I don´t think I saw that with beta 2, but I only tested it very briefly. It MAY be specific to your hardware, but I will doublecheck my installation again (I may not have panned around enough). So far this is the only report about this I heard. But please report it to LR nonetheless! Thank you, Jan Thanks Jan. Anyway, I posted it in the 11.30 beta bug forum at x-plane.org as well for further investigation. Quote
JackH2O Posted November 6, 2018 Report Posted November 6, 2018 Same write-up here. Blank screens on PFD, MDF, and FMC. Re-install of program, no help. XPL 11.30 - jw. Quote
Litjan Posted November 7, 2018 Report Posted November 7, 2018 Hi Jack, the initial complaint was that the rest of the cockpit "disappeared" when looking up or down - not blank screens on the flight displays. Just to clarify, is that what you are seeing as well (look at the video, not only the still picture on the OP´s post)? If you have blank screens on the flight displays and mcdu it is likely that you have a different problem, either your plugin in not running or you have no electrical power to the aircraft which is probably not due to 11.30. Cheers, Jan Quote
Litjan Posted November 8, 2018 Report Posted November 8, 2018 Hello Jorge, I just verified again in 11.30b2 that I do NOT see the problem of the cockpit disappearing like you do. So it must indeed be something specific to your setup... Cheers, Jan Quote
Jorge Uvo Posted November 8, 2018 Author Report Posted November 8, 2018 11 hours ago, Litjan said: Hello Jorge, I just verified again in 11.30b2 that I do NOT see the problem of the cockpit disappearing like you do. So it must indeed be something specific to your setup... Cheers, Jan it makes sense that could be something with my setup, otherwise we would see many more people with the same issue. I installed back the X-Plane 11.26, so I can fly with the B733, then I try the 10.30 again when the first Release Candidate version be available. Thanks for try, anyway, Jan. Quote
Litjan Posted November 9, 2018 Report Posted November 9, 2018 I think it is most likely caused by new rendering paths for the shaders - and in your case a conflict with some add-on or plugin (environmental, colour change, etc.) that you use. It will most likely not get better with the full release of 11.30 - so you will have to do some troubleshooting (run with plain vanilla X-Plane and the IXEG, then add stuff back in) or stay with 11.26 for the rest of your life . Cheers, Jan Quote
Jorge Uvo Posted November 9, 2018 Author Report Posted November 9, 2018 15 hours ago, Litjan said: I think it is most likely caused by new rendering paths for the shaders - and in your case a conflict with some add-on or plugin (environmental, colour change, etc.) that you use. It will most likely not get better with the full release of 11.30 - so you will have to do some troubleshooting (run with plain vanilla X-Plane and the IXEG, then add stuff back in) or stay with 11.26 for the rest of your life . Cheers, Jan Huuum, that's is a good point, Jan. Well, I will wait a more stable version of 11.30 and start to do my tests to figure out the root cause of my issue. Quote
crisk73 Posted November 11, 2018 Report Posted November 11, 2018 Hi, I've found that the vortex option is responsible for the same bug with 11.30b. It's fine once it's switched off. 1 1 Quote
Litjan Posted November 11, 2018 Report Posted November 11, 2018 Good find, Chris - we really have to get rid of that option soon! Cheers, Jan 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.