Fesi Posted January 15, 2018 Report Posted January 15, 2018 (edited) I fixed this issue a while back. I installed tugmaster which uses the python software that causes the aircraft to shake. After deleting the shaking goes away. I now installed better pushback which started an issue with IXEG 737 again. This plane does not like pushback programs. During engine start the EGT and N2 do not indicate values and does affect the aircraft power. When I remove BPB it works fine again. It seems like these problems are specific to me for some reason because when I search online I don't see anyone experiences these issues. How do I get these programs to work with each other. Actually I removed BPB but still happens. Edited March 1, 2018 by Morten Quote
mmerelles Posted January 15, 2018 Report Posted January 15, 2018 are you running latest xplane 11.20 beta vr1 version? Looks the same that this below (Laminar bug): 1 Quote
Shanwick Posted January 15, 2018 Report Posted January 15, 2018 (edited) It's caused by the XP11.20vr1 update. You have to roll back to 11.11 if you want the engine digits. With every new XP update, something in the sim will stop working correctly. It's frustrating. Edited January 15, 2018 by Shanwick Quote
Litjan Posted January 15, 2018 Report Posted January 15, 2018 On 1/15/2018 at 9:27 PM, Shanwick said: It's caused by the XP11.20vr1 update. You have to roll back to 11.11 if you want the engine digits. With every new XP update, something in the sim will stop working correctly. It's frustrating. Expand Its the way of progress! And you can resort to flying at night - the digits show then! Cheers, Jan Quote
Fesi Posted January 15, 2018 Author Report Posted January 15, 2018 Not sure it is caused by the update because I got the digits back a couple times yesterday. Yes it is frustrating. Hope developers are fixing these things. Quote
Shanwick Posted January 16, 2018 Report Posted January 16, 2018 (edited) On 1/15/2018 at 10:13 PM, Litjan said: Its the way of progress! And you can resort to flying at night - the digits show then! Cheers, Jan Expand I just don't think it will ever stop. One must constantly compromise something. By the time everything works works well, x plane 12 will probably be available and it starts all over again Love the IXEG 737. I also want to thank you Jan. Your dedication and expertise is highly appreciated here! Edited January 16, 2018 by Shanwick Quote
mmerelles Posted January 16, 2018 Report Posted January 16, 2018 (edited) On 1/15/2018 at 10:57 PM, Fesi said: Yes it is frustrating. Hope developers are fixing these things. Expand Your post feels is a bit contradictory If you are trying to avoid frustration and looking for a smooth and stable experience you should stay away from BETAS, betas break things, they are there to evolve and test new stuff, that is the nature of betas. Edited January 16, 2018 by mmerelles Quote
Fesi Posted January 16, 2018 Author Report Posted January 16, 2018 I agree, it's my fault. When I start x plane it tells me there is an update so I do it. I'm not looking for betas. I will pay more attention and not update the betas anymore. Quote
mmerelles Posted January 16, 2018 Report Posted January 16, 2018 On 1/16/2018 at 1:35 AM, Fesi said: I agree, it's my fault. When I start x plane it tells me there is an update so I do it. I'm not looking for betas. I will pay more attention and not update the betas anymore. Expand If you disable "check for betas" check box on the installer. Xplane will only warn you about new stable releases but not about betas. If you want to roll back to the latest stable release 11.11. Simply run the installer, disable "betas" checkbox, and clic update. The installer will tell 11.11 is latest stable available and await for you confirmation to roll back smoothly for you. Quote
Fesi Posted January 16, 2018 Author Report Posted January 16, 2018 I did disable the check for betas yesterday and was in fact wondering how to roll back to the last stable version so I will try that. Thanks I have a question about IXEG. In the FMC it has company route heading and the aircraft folder has a company route section as well. It states we are to put the flight plan file in the coroutes folder with extension .FPL. I don't see this folder. Am I suppose to create a folder and where? It also sais save route in the FMC but every time I try it tells me there is a problem saving the file. An answer would be appreciated. Quote
Litjan Posted January 16, 2018 Report Posted January 16, 2018 Hi Fesi, there is indeed a quirk in the installation program that needs you to manually ad a folder named "coroutes" to the aircraft folder. Sorry for that omission! Once that is present, you will be able to save your current routing with the "save route" prompt. It will add a file with the .fpl extension to that folder. At my company we use a pair of three-letter codes with a number for our company routes, for example KLAX - KSFO route 4 would be LAXSFO4.fpl Cheers, Jan Quote
Fesi Posted January 16, 2018 Author Report Posted January 16, 2018 I should of asked this question three months ago. I've been trying to save flights with no success. Thanks Sir for the information 1 Quote
Shanwick Posted February 13, 2018 Report Posted February 13, 2018 Are these digits showing up in 11.20.r2? Quote
Litjan Posted February 13, 2018 Report Posted February 13, 2018 On 2/13/2018 at 12:56 AM, Shanwick said: Are these digits showing up in 11.20.r2? Expand Yes, they are. But I would hold on upgrading until 11.20vr3 is rolled out (any second, now), as that one fixes a few showstoppers (for some people) of vr2... Cheers, Jan Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.