Jump to content
Jovabra

After update strange instruments dispaly

Recommended Posts

Hi all,

After the latest update i have a strange 3d cockpit view/display. I'm looking at the (occiput)head of a pilot's and the 'out/in' zoom function doesn't work enough. Also a lot
of engine displays are distorted even some mcp display's. See picture.

I'm missing also the configuration opportunities on the lefthand side of the screen. So for me not a successful update.
Regards John

Knipsel.JPG

Share this post


Link to post
Share on other sites

Doh.. looks like something went wrong during your update, can you try updating again and remember to switch off anti virus etc?

M

Share this post


Link to post
Share on other sites

M,

I re-downloaded again a new file from X-Aviation. It looks that it is updated to version1.02. The zip file name is also 1.02.

i performed a new install and during the installation they removed the old one. Everything looks normal BUT you can read in the FMC the version of the installed software. The
installed software  gives V0.8. In my opinion there is a wrong and old file in the X-Aviation software shop. After update again to 1.02 same problem happend.
Regards John

Share this post


Link to post
Share on other sites

John, have you tried reloading the aircraft, either choose another aircraft, then go back to 737 - or - quit sim and start again?

Share this post


Link to post
Share on other sites

Morten,

I loaded the 767-300 and the Airfoillabs 172 and all looking/working normal. It is also impossible to rotate and activated any kind of switches/knobs. All are frozen.
Aircraft is complete unusable. I moved the aircraft to the hangar for a complete overhaul and in the meantime i used my "spare" 767-300 plane.

On the picture you can see the complete misalignment of the engine indicators.
Regards John

Ps; Is it possible to remove the unwanted members in the cockpit? :-)

Knipsel3.JPG

Share this post


Link to post
Share on other sites

I think it is helpful when you post also the x-plane en gizmo log files. The developers then can check if Gizmo is running well.

Share this post


Link to post
Share on other sites

Yes, please provide your log files. All that weirdness you are seeing suggest the plugin code is not loaded properly. 

Share this post


Link to post
Share on other sites

Jovabra, can you confirm you DISABLED your antivirus when you downloaded? We had some similar cases where this was the problem and they got resolved when disabling antivirus.

M

Share this post


Link to post
Share on other sites

Please try and temporarily remove all plugins except Gizmo and restart X-plane. Your log.txt reveals a number of 3rd party plugins and quite few error messages that could be contributing to the problems. 

Share this post


Link to post
Share on other sites

Nils,

Removed the plugins, no result.
Keep in mind that version nr 1. working normal. First update working normal and now the second update is the problem.
I did not installed other plugins or programs after the 737. If i uninstalled the 737 and performed a clean instal of the first one everythings works normal.

I have also an Imac cmptr and installed in the mean time the 737 and performed also the latest update. Everything workes normal.
In my Window10 cmptr  i see in the cockpit a captain and the first officer sitting in there seats. It's looking very weird and they disturbed the vieuw of the instruments. 

Share this post


Link to post
Share on other sites
I did not installed other plugins or programs after the 737. If i uninstalled the 737 and performed a clean instal of the first one everythings works normal.

If you remove the 737 completely, and do a full reinstallation, do you not get the latest 1.0.2 version? The reason I ask, is because I just purchased the aircraft yesterday, April 30, and the installer zip file still said Version 1.0, but when I ran it, and it connected to the X-Aviation server to download all of the components, the aircraft version I ended up with was 1.0.2, without having to apply any hotfix patches through gizmo.

Jim Barrett

Share this post


Link to post
Share on other sites

Jim,

I downloaded the latest installer from X-Aviation. The zip-file nr is 1.02, So far so good. The installation program found an other installed 737 and ask me for a complete uninstall. I conformed. Everything installed fine, but when you check the version number of the software in the FMC you find version 0.8??? If i checked for a earlier  update in version 1.01 (for example) they removed the option to select "Verbal Flap Callouts" in the preference menu. But in my 0.8 version still available.  I.o.w i installed a older version i.s.o. the latest one. How is that possible?

Regards

Knipselx.JPG

Share this post


Link to post
Share on other sites

Strange! This was my initial install after purchase. The config menu on the left side shows version 1.0.2, but the FMS shows version 1.0.1...

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
5 hours ago, JRBarrett said:

Strange! This was my initial install after purchase. The config menu on the left side shows version 1.0.2, but the FMS shows version 1.0.1...

Sent from my iPhone using Tapatalk

Just the FMC display wasn´t updated in the last update - if the config menu shows 1.0.2, you are good to go

Jan

 

Share this post


Link to post
Share on other sites
Just the FMC display wasn´t updated in the last update - if the config menu shows 1.0.2, you are good to go

Jan

 

Thanks for the confirmation. I was pretty sure that the config menu was the accurate indicator of the installed version.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×