ALH

I am sorry but I don´t have any idea why the levers move alone. There is no autothrottle that could do something wrong also not activated. Really strange. Are you sure you don´t have any other hardware that could be mapped to the throttle? This ware my only thought, but if not, I don´t have any further suggestion. Disconnect all your HW and look what happens.

The best way to proceed is to power on the plane, start the GPS and make flight planning and set radios and other things, shut down the avionics and make the startup. After it is done, power on again and switch on the GPS and the flight plan is kept as before. Enjoy this beauty aircraft.

Great to know it had worked. Enjoy this bird because the immersion is enormous. You have to work more than the autopilot and is a real pleasure to fly.

Assign your joystick and hardware through the default XP11 commands and it will work fine. Go to Joystics from the menu and then look for your hardware and asign each axis and key.

Hello Selmer79, map yor joystick with the default commands of XP11. Don´t use the specific airplane to assign the axes and buttons, do it very simple with the standar assignemts through XP11. I have the TQ6 Throttle panel + Flight Master Yoke III and a Saitek throtle panel and all works fine and with all airplanes, from propellers to jets. Good luck.

Thanks to all of you for the prompt answers and sugestions. At least seems to be that with my current hardware I could get a decent performance to start with. Afterwards I will go for a new hardware to cope and enjoy with the XP 10 demands. Thanks again and good flights !! Rolando

Hi everybody, I am new in this forum and trying to learn about X-Plane 10 before making the jump. I am an old MSFS since the very begining (I don't want to count the years ;-) and I have already a question about hardware. I know I have a semi old PC with the following configuration: - Windows 7 umtimate SP1 64 bits - Intel Core 2 Quad Q9550, 2,83 Ghz, 3 Gb RAM - GeForce Nvidia 9800 GT 1 Gb I know I have to "renew" the system, but would like to know, how do you think XP-10 could perform with this configuration? Could it help changing only the Graphic Card to a Nvidia 570 for example or the Quad is to old for it? Currently I am flying FSX always from VC with IFLY 737, MADDOG 2008, Cap Sim 757 and 727, and getting average 20 to 30 FPS everywere, but 11 to 15 in busy airports. Not so bad. No sttutering and running quite smooth also with low FPS. Thanks for any comment or hint to move forward to XP-10. Any help is very welcome. Best Regards, Rolando