Sleepy81

OK, so I played NTSB on this flight and it looks like the incident happened about 12:06:45. In the .csv the bank angle increases above 30 deg at that time, and continues to increase to inverted and beyond. I am a bit confused regarding the different roll coloums. One says Roll and is in line with that I saw. The other says RollC, and could be Roll Commanded by autopilot maybe? That pegs at 30 deg and stays that way until impact. I noticed that the FD was somewhat "crocked" during the flight. For about 80% of the flight it was tilted about 5 deg to the left, but the aircraft AP seamed to ignore that and followed the route fine with wings straight and level. The "tilt" didn not correlate with any crosswind corrections, and the AP flew straight and level with the correct crab to compensate anyways. Also se that the AP suddenly changed from NAV/ALTS to ROL/NONE and then ROL/ALTS. That does not match what I saw in the cockpit. The AC was on AP NAV/ALTS when it happened, and the AP disconnected (light went out on the AP panels AP button) as far as I remember. So something weird was going on with the AP here... Attached XLSX file if that helps. TBM900 crash.xlsx

So, was on approach to LOWI. 13000 feet, turning from TULSI to RTT on AP with VPATH selected to hit RTT at 9500. Shortly after the right turn started, the aircraft abruptly and with no warning continued to turn right at full lock. Nosedived and hit the ground. I tried to take manual controll, ensuring AP was off, but I could not move any flightcontrols. I fly with pilot yoke hidden, but saw copilot yoke fully turned to the right, and it did not move at all when I moved my physical joystick. Wx was CAVOK, no icing (Pitot heat sw both on regardless). Else the flight was normal, with only a few sec when I hit above 100% max torque (should not cause this problem regardless). Also, aircraft maintenance was showing all components brand new prior start from ETAD, so should not be any catastrophic failures, even though it feelt like the right wing broke off based on the violence of the maneuver. Any ideas as to what happened? Attached X-plane log.txt and the TBM900 flightlog if that helps. Else: fly in VR (Pimax 8KX), 5800X, 3080TI, 32GB DDR4, Win10. log_220113_101634_ETAD.csv Log TBM900 out of controll.txt

Know your all focusing on the CL650, but just want to confirm that Navigraph will be in the TBM900 soon? I.e still on the roadmap for updates. Just bought the TBM today and was a bit surprised that Navigraph was not supported on the MFD. (My bad really for not researching it)

Attatched. Log.txt BTW, I see that the end of the log is somewhat different than the pasted log in my first post. No idea as to why, maybe because this time i did not go from 2D to 3D, but started X-plane in SteamVR mode, selected CL650, Non-Persistent, then it CTD.

Just to follow up on this. I feel like I’ve tried everything now, but to no avail. Starting x-plane in 2D then switching to 3D, starting in 3D, switching to 3D after entering cockpit, non-persistent mode, career mode with and without FBO enabled. All leads to CTD, and all with the same errors in the .log as posted above. (The part towards the end where it crashes is always the exact same) All other aircraft work fine in VR for me. Running on Pimax 8kx via SteamVR on a 5800x/3080TI/32GB DDR4 and win 10. I bought the 650 knowing the devs did not say anything with regards to VR support, but reading people who said it worked fine (except the FBO, cellphone menu etc) made my buy it, thinking it would work for me also. I hope this is fixed somehow so I didn’t waste 114USD… (No, I won’t go back to a flat screen )

Same for me... Log.txt

Due to FBO etc. not working in VR I start in normal mode, then want to transition to VR once i'm ready to sit in the cockpit. However, when I try to enter VR Z-plane crashes. Using Pimax 8Kx with SteamVR on a Ryzen 7 5800X, RTX3080TI, 32GB DDR4 RAM on WIN10. Attached is the applicable part of the LOG file: 0:06:09.764 I/OVR: Initializing VR Subsystem. 0:06:09.764 I/VR: Interaxial set to -0.032656,0.032656 0:06:09.764 I/OVR: This device DOES have a proximity sensor. 0:06:09.997 G64: core: Run: [OnEnteringVR] 0:06:09.831 E/GFX: Rebuilding offscreens for window resize: x=9128 y=3948 hdrx=9128 hdry=3948 2022-01-11 10:54:54 CL650[libhud.c:768]: assertion glewGetContext()->__glewCheckFramebufferStatus(0x8D40) == 0x8CD5 failed (0x8cd6 == 0x8cd5) Backtrace is: 0 00007FFFCD394F69 C:\Windows\System32\KERNELBASE.dll+0000000000034F69 () 1 0000000082B452F1 C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\Aircraft\X-Aviation\CL650\plugins\systems\win_x64\systems.xpl+00000000005652F1 (hud_render_eye+561) 2 0000000082B45A91 C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\Aircraft\X-Aviation\CL650\plugins\systems\win_x64\systems.xpl+0000000000565A91 (draw_cb+1c1) 3 0000000082B6AC57 C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\Aircraft\X-Aviation\CL650\plugins\systems\win_x64\systems.xpl+000000000058AC57 (draw_cb+77) 4 00007FFFC357556F C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\Resources\plugins\XPLM_64.dll+000000000000556F () 5 00007FFFC3576479 C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\Resources\plugins\XPLM_64.dll+0000000000006479 () 6 00007FF61A26D73B C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\X-Plane.exe+0000000000AFD73B () 7 00007FF61A2ACE42 C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\X-Plane.exe+0000000000B3CE42 () 8 00007FF61985A041 C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\X-Plane.exe+00000000000EA041 () 9 00007FF619857B15 C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\X-Plane.exe+00000000000E7B15 () 10 00007FF619C6B15A C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\X-Plane.exe+00000000004FB15A () 11 00007FF61A5B9B3A C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\X-Plane.exe+0000000000E49B3A () 12 00007FF61A5AC766 C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\X-Plane.exe+0000000000E3C766 () 13 00007FF61A7DB2B7 C:\Program Files (x86)\Steam\steamapps\common\X-Plane 11\X-Plane.exe+000000000106B2B7 () 14 00007FFFCEC67034 C:\Windows\System32\KERNEL32.DLL+0000000000017034 () 15 00007FFFCFB42651 C:\Windows\SYSTEM32\ntdll.dll+0000000000052651 () --=={This application has crashed because of the plugin: Challenger 650 by Hot Start}==-- Any ideas?