ilias.tselios

No. Avanti will always be free, and I'll do my best in any free time I have, to do it better. I do have, at least for the next 2-3 years involvement in other projects, like DC-9, which put this out of question. I would be glad if there is anyone, who would have knowledge in certain areas, to get involved and help me with the Avanti.

Should not require Avitab, but because of my fault it does, which will be fixed soon. Also I will add the needle on the PFD too.

Oh that's a bummer from my side. I'm about to add Avitab, I added some code, but didn't add any check if the plugin exists or not. You can download the Avitab directly from here: https://github.com/fpw/avitab/releases, and install it, until I add the fix. Do you have any livery in mind? I'll try to find some time to do one. EDIT: Is this ok for you?

UPDATE!! Working now on the systems simulation. Here is an example of how is going. One of (the many!) characteristics of DC-9 is that the rudder travel is limited in relation to the factors below: - Airspeed (there is a dedicated pitot tube on the leading edge of the vertical stabilizer) - Flaps setting, - Right hydraulic system pressure, and - Rudder power lever position (yeap has such thing; DC-9 is a very unique plane)! The restriction is as in the image. This part of the flight control system is done! Works 100% as in the real aircraft! I'm heading for the next item!

Hey guys, v2.2.0.VR is now available! CHANGELOG - VR compatible in collaboration with SimVRLabs. - New outside mapping. Incuded 1 basic (white) texture and the XB-KSW. - Includes previous fixes. - Initial Avitab implementation on MFD (3rd page). No "touch" controls yet. - New manipulators, due to compatibility with VR. - Manipulators for Flaps, Condition Levers, and Throttles with detends. Here you are: http://forums.x-pilot.com/files/file/1081-p180-avanti-ii/

No. You need the full product to be able to have access to the land for the rest of the world.

Exactly! Specially when you got it in the plane!

Typical cabin pressurization problem. If you do a cold start, then the switches in the image below will be on the OFF position. After start the engines, turn them ON.

A short update. Working now with SimVRlabs to adapt Avanti with VR. A few things are remaining to be ironed out, before ready. With that opportunity, all manipulators have been reworked, specially the throttles, condition levers, and flaps. Now they have a "gated" fill, which means that they will "stick" a bit in the various positions. Also I have remapped the whole exterior of the plane to allow for easier painting, which means that the old liveries won't work. I will try to do, except a white basic, another one maybe, and then hopefully the community could jump in to do more. In conclusion, a new version (2.2) is on the horizon.

Definitely the whole flight model needs some work to be modernized to XP11.30 standards, which, unfortunately, is something that I do not have. Hopefully in the near future be able to tackle this.

Are you running XP 11.30+ with experimental model on? If so, try with off. I can't see anything problematic in the log files, and I can't see any obvious reason.

First of all, you can't control the throttles via manipulators in 3D cockpit. This is something that will come in the near feature bundled with VR compatibility. You can only control them via joystick or keyboard. Is there any possibility to have any kind of problem with your joystick?

If you pressed the VNAV button. Although exists, X-Plane behaviour is wrong (engages autothrottle) which is not right. So the throttles are controlled by the "AP" and you can do nothing, except press it again to exit and select another vertical mode (V/S, FLC, etc).

Did you engaged VNAV?

I think that I will make a tradition to post once per year to keep this thread alive! Here we go...

Time for a short update! I'm working on the system side and have almost done with the GUI and the weight and loading. So, let me explain the overall design philosophy, which extends to the whole project. Your role in the DC-9 is the Captain in command. You will have the role and the responsibilities due to that position. That means, for example, that you will adjust the fuel you need for your flight, but not in which tank the fuel will go. This will be done automatically by a background "load manager". The same with passengers and cargo. Of course, will be your responsibility to make sure that the loading limits are not exceeded! Image 1: Pax loading. The bottom graph displays the limits (red markers) and the blue and pink markers the current ZFW index and TOW Index respectively. The limits will also move depending the current gross weight, to project the 2D chart (see image 4) into a 1D line. I believe the rest are self-explanatory...how they work! Image 2: Cargo loading. Note: Each passenger is computed to carry 1 item of 13 kg baggage, which will take some cargo space. I will also add at the bottom the same graph as in the passengers tab. Image 3: Fuel Loading. You will just adjust the total fuel. Also I will add the same graph here too. Image 4: Aircraft Loading. This is the final tab you will have to look at, before you start your flight, because beyond having the full chart available, you will use the GW marker to check in which slope line you are close, to get the stab trim setting (STAB TO ANU) for the take off!.

First post of the year, so... Happy New Year 2019! Working on weight and loading, as well as fuel system, with a bit of UI! Here's a sample. While you are loading the plane, on Aircraft tab you will get a actual diagram with pointers for EMPTY weight (not something useful; might be removed), actual Zero-Fuel-Weight (ZFW), and a current Gross Weight (GW). This will not only allow you to check if loading is within limits, but also you'll get the trim setting! In that example looking at GW pointer, we get a GW of 42.2 tons (42245.78 kg...yes those number up in the corner... is for debugging!) and loaded index of 60. Also you should notice that the pink marker touches the 5 deg. diagonal line, which is the trim setting you must use!

To have the latest version you need to download all the below. First file will install an older version of the plane and the required Gizmo plugin. After done that, delete the aircraft folder and put in place the second file. At the end, replace the script folder inside the Avanti folder with the last file. Make sure that you have done that, and report back results.

So far, nothing seems out of order. Have you solved your problem?

Hello there. Inside your X-Plane 11 folder are 2 files, Log.txt and GizmoLog.txt. Please attach them to your reply here. Also tell me what other plugins you are using. Also, watch this video with a few details on the plane, in case you are missing something. https://www.youtube.com/watch?v=Mgg0l9ZRZcQ

Just before the end of the year, I would like to address the reasons for the long delays. Here we go... https://iliastselios.wordpress.com/2018/12/27/dc-9-state-of-the-union/

The right place to ask this question is here: http://forums.x-pilot.com/forums/forum/165-skymaxx-pro/

I have a good close up one