theBrdy

Think about it Jan....the works practically done for you..just got to add a few details..how long can that really take

Saudia WIP shots. Got my work cut out on that nose...jeez! Anyone got any requests I can stick on the conveyor? if its less complex than this one I could get it done pretty quickly. Cheers. Birdy

Ktomais, Hello my friend, I've corrected the logo on the tail, thanks for pointing that out, just uploaded it so its good to download so I hope it looks a lot better now, please give me more feedback if it isn't. As for the decal just off to the side of the door, unfortunately this can't be replicated due to the size and the small you go, the more pixelated wording gets , I have tried myself and the writing itself just looks like Pac Man quality (Unreadable). If there was a away on implementing decals (I'm not sure of one), I'd happily do it, but with just a paint kit, it just can't be done I'm afraid so I'm sorry buddy. Kind regards, Birdy

Morning everyone, I've had a little time to go back and update a few of my liveries so its compatible with v1.3 engine paint kit, why? Because on my engine paints, I made an attempt to draw my own lines that are above the engine (which are now present in the new version and are far better and accurate), Not only that, my lines are still visible in the new update so you get my lines and IXEG's over the top also, so it doesn't look great at all. so these liveries are now updated, on the new Engine paint kit, with the edit of not having the lines. So liveries updated for v1.3+ so far: GO Airline: https://forums.x-plane.org/index.php?/files/file/51486-go-airlines-clean/ NEW Lufthansa: https://forums.x-plane.org/index.php?/files/file/51608-new-lufthansa-733-ixeg/ Poste Italiane: https://forums.x-plane.org/index.php?/files/file/51637-poste-italiane/ Fedex: https://forums.x-plane.org/index.php?/files/file/51580-fedex-cargo-737-clean-dirty-versions/ EDIT: The engine chrome cowlings are implemented on all these liveries (I know it’s not accurate To the paints but once the new paint kit is released, I’ll go back and correct them) Many thanks and hope you enjoy, Nick P.S - looking into painting again soon, so I'm looking through this thread so see what gets most attention

Oh that’s awesome, didn’t even know one was in progress! Very exciting! Thank you, I’ll wait for the kit to come out. Nick

Is there any update? Maybe something in the engine paint kit We can deselect to durn the chrome off?

No worries! Thank you Litjan! Oh yes please...really sorry about that, internet is slow hereI assumed it didn’t post! thanks again

Firstly - What a great update! So happy with the modifications! You guys have really pulled it into the bag and have done a superb job! LOVE THIS PLANE!! And this topic is not a problem As such, but all my livery’s have shiny cowls, is there a way of switching this off? I feel like I’m being blind I’m sorry! Many thanks again! Great job! Nick

Sergio Morozov hope this helps

Litjan, Thank you for the speedy reply and acknowledgement, looking forward to the showcase! many thanks again! Nick

So I love this aircraft, and I love your aircraft! which is a great representation I might add. Please don't think that i'm nitpicking this is simply a enquiry/request on the exterior modelling, if possible. 1) cockpit window geometry: comparing the three pictures, will these windows be modified as in some views (see pic 3 below) the angles seem a little off maybe? below: side windows slightly angled up credit where its due, you mentioned you was restricted/limited to polys when building this aircraft, and i understand your smoothing some of these out etc. so i was wondering if these areas will see some attention too? 2) Engine Vortex Generators: Comparing these two pictures, is it possible to make them bigger perhaps? Thanks guys, and thank you for still developing an aircraft that people in this group love just as much as you do! Keep up the great work, looking forward to the next update (I check on a daily bases)!

Edit: tried it..didn’t work. Never mind

Interesting. Didn’t think of this angle. I’ll give that a go at some point today mjrhealth, thank you

I did have another idea..of being able to input/type in ZFW and fuel qty instead of sliders?

Nicotum, I just read through your documents. And it looks like a great plugin my friend. So really nice work But what I’m requesting for is just one simple slider which can change/restrict how much brake pressure can be applied through a press of an assigned button/trigger. So when I press the button, I’m not getting a 100% whack/or full braking.

Well I don’t have pedals and I only use a trigger on my stick. Is there a way of softening how much braking goes into a single press of the trigger?

How about a brake slider to adjust how sensitive the brake is applied. The drama I get is that it can be on at max. Or intermittent max (brakes every 3-4 seconds at max) would be nice to set a sensitivity so we can do nice slow stops

Hi guys, really looking forward to the update and future updates of this bird! It just gets better and better! so I was wondering, on a texture/modelling/visual stand point, if the engine lines you see in the pictures below will be modelled? I try and draw my own on my livery paints but it doesn’t look very realistic in my honest opinion. So yeah...just sticking it out there to see if I can bite some interests for some visual changes. If not, it’s no issue, just sticking it out there anyway haha. Thanks guys! Looking forward to hearing more about these updates Birdy

This is very exciting! I can’t wait for more updates!

I’m also looking forward to this update. I had to sell my old pc due to extension of the family....but I’ve bought another one now, just for the reason I miss flying. can’t wait to start new liveries and most importantly, I can’t wait to fly my 737-300 again. really good to see this bird is still being developed, it’s the only reason I fly on X-plane 11 keep up the good work IXEG!

If your new to painting. Please see this. It’ll help with the paint glitch for engines

I came across this glitch in my reprints. As stated before in previous comments, there is a work around. And it resides in the opposite side of the paint kit (so what you see in the window is on the other side of the aircraft..on the paint kit, if that makes sense), find what area of the logo you see coming through, cut a window shape out of the logo (where it bleeds through on the aircraft) and that should do the trick

SAHA AIRLINES EP-SII 2 x variants: 1 x Clean versions 1 x Dirty versions Hope you all enjoy. Many Thanks, Nick https://forums.x-plane.org/index.php?/files/file/52319-saha-airlines/

FLASH AIRLINES SU-ZCD 2 x variants: 1 x Clean versions 1 x Dirty versions Hope you all enjoy. Many Thanks, Nick https://forums.x-plane.org/index.php?/files/file/52260-flash-airlines-clean-dirty/

After a failed attempt at trying to recreate the South West Arizona One livery (SWA4420, Really sorry again my man), I have decided to move on to another livery. so to that end, I'm open to suggestions? Cheers. Nick