Xpillo

OK, Thank you……...

I want to assign this button to my joystick but can't find it in the long list of commands. Can someone tell me what exactly it is? Thank you

You try any other plane and tune to the frequency 108.80 and you will see that not only do you get the dme, but you also provide direction and radial. Only the TMB900 does not receive DME, DIRECTION/RADIAL. You have tried another plane and have tuned the frequency 108.80 ?, try it and tell me if you only receive the DME from that station.

Can someone check at this "ICAO= ETSL"-LECHFELD airport the frequency of VOR-TAC 108.80? I do not receive a signal in this frequency with the TMB900, but with other planes I have no problem receiving the signal from this VOR-TAC station. Thanks

I have this same problem that is shown in the image, just at the beginning of a flight the aircraft appears double, but at the second the aircraft appears normal. He clarified: it only happens when the aircraft appears at the start of a flight and you can see for a second the duplicate cabin, then it is normal, this did not happen before the TBM900 started. note fixed: disable effects of rain and ice. The problem occurs with the effects of rain and ice ON. My Xplane11 is version in Windows 10.

The same thing happens, the Pitot and Static protections are missing. It's not a problem, to be corrected for V1.1.9

This error I have suffered several times and it seems to be unknown ... it occurs to a lesser extent, the same thing you do 3 complete flights without problem and then on another flight this error appears TBM900[except.c:282]. It seems to be an unidentifiable error

I have this problem and the strange thing is that it does not always happen, the simulator freezes and gives an error of the X-Plane 11 \ Aircraft \ X-Aviation \ TBM-900 \ plugins \ systems \ win_x64 \ systems.xpl. In some flights everything works normal and the simulator does not freeze, but in other flights this problem occurs. Log.txt

Well, I have not suggested anything about incorporating this device ok ... just curious to know what function it has. On the plate in question is already incorporated in the door, indicates exactly the same as what you see in the image. Note: By the way, this project of the TBM900 is without a doubt the novelty and best simulated in Xplane11 from my point of view, without a doubt the developers of this project are very talented and the success is assured. Thank You

ok, the image corresponds to a TBM 900, but I still do not know what type of device is marked with a brown arrow. And has it been modeled after? Thank You

It is only out of curiosity, I would like to know why they are not modeled ...... In the image I have placed 2 arrows that show what is not modeled inside the booth ok. Now, about the device that is not modeled "Arrow brown" which function does it have? Note: I can not see clearly what type of device is in this image. Thank You

Solved, you are right ... I checked my internet speed and it was very slow hehe, I have 300Mbs hired and in the speed test it indicated me 145Kbs. Thanks you

Solved autorouter.aero ….

I have a question about the updates ... can I go back to an earlier version if I upgrade to 1.1? What type of condition has been removed? --->Removed HDEF condition from GPS-> LOC switchover. I do not find anything concerning this condition HDEF

Well, this is my flight log with version 1.0.9-------- stress test DEPARTURE: "LEAL" Spain --- ARRIVAL: "EDDB" Germany --- Distance 1150NM ---Time in flight: 4Hrs I have not had any problems on this long distance flight and the Xplane11 and Windows registers do not have errors. At the moment everything is working well, I need to activate the autorouter.aero charts and use them in flight if it presents some kind of error. NOTE: If any problem occurs from now on I upload the file log.txt