vnangli

I should have known about that earlier. Thank you for sharing this information. IXEG is keeping me busy and am a very happy with the updates...It surely did fix one issue of mine. With the immediate previous version, IXEG had to be the very first plane I had to load to properly open it whenever I started Xplane 11. For e.g, if I opened default 737 first as soon as I started Xplane and then tried to open IXEG there would be errors. Now thats gone... Thank you team IXEG

I was doing the test flight from KORD to KMKE. I took off from KORD and did RTE entry in the FMC during flight. Chose 07R for landing, no TRANS. IAF was BONOT. I tried to create CUSTOM WPTs before BONOT using RADIAL/DISTANCE method. Continuously got “NOT IN DATABASE” message. Is this a limitation of the 737 NGs FMC or has it (creating custom waypoints) not been modeled in IXEG’s FMC??

First things first. Congratulations to the IXEG team for this update, you made my weekend. While I was checking out the details of the updates, I noticed that the Thrust reverser levers in the cockpit do not animate. Basically, I have mapped keys on my joystick ONE to TOGGLE THRUST REVERSER LEVER and another key to APPLY MAX REVERSER THRUST. Now when I engage thrust reverser using my joystick keys, I am seeing that the actual thrust reverser levers in the throttle quadrant don’t animate to confirm Thrust reverser in action. Sometimes there is a lag in the animation and sometimes there is absolutely no animation. But the external view confirms thrust reverser engagement. Is there a sequence that I should follow? So that I see the levers animate...

Captains, I just had to reinstall IXEG on my computer today. Thats when I had to come across an option to choose from "GIZMO BETA" or "GIZMO STABLE RELEASE". I chose to install GIZMO STABLE. Now, my question is, how do I update to the next GIZMO update whenever a next stable release is available? Will I have to reinstall IXEG all over again? During today's initial attempts to update IXEG, I ran into problems prompts like "unable to move GIZMO..." from X-Plane folder to ...... As I didnt know how to figure out what was happening, I instead chose to reinstall all over again. Thanks Vijay

I have a new problem and an opposite one I have disabled DOWNWARD WIND ILSes and have been trying to land using ILS on RWY 14 and 23R in KIND. My FMC is programmed for 23R and RACEN transition. As soon as the LOC is captured, the plane wanders away. The MAP feature in X Plane when DOWNWARD WIND ILSes are disabled, doesn't show 14 and 23R as ILS runways. But www.airnav.com says 23R and 14 are ILS runways. So, which information is correct? Airnav or X-plane? I dialled 111.75 for 23R, as soon as the LOCALIZER would capture the plane was wandering away from the approach course. I used IXEG 737. So, this is opposite to what was happening in KORD and landing on 28R where I had to disable downward ILSes. Basically, I want to use 14 or 23R for ILS landing when DOWWARD WIND ILSes are disabled. Can you please help me of how to deal with this?

Thank you. I was programming the FMC for arrival on ILS 23R at KIND through RACEN transition. A direct path from ZOSAR to RACEN and 23R would have been a sharp right turn. So, I wanted to create ZOSAR050/5 before RACEN. A FIX would be a good visual reference. Thank you for replying to my question. have a great day

Friends, I was trying to create custom waypoints in the FMC based off of existing waypoint in the LEGS page. I was getting the message “NOT IN DATABASE”. Here is what I was trying to do. ZOSAR is a waypoint near KIND Airport. I wanted to create ZOSAR050/5 (basically another waypoint on 050 radial of ZOSAR and at 5NM distance) and I was getting the DATABASE error. My question is, Is the custom waypoints creation not a feature in 737 CLASSIC’s FMC or is it not modelled in IXEG’s 737?

Disabling downward ILSes did the job... My flight was predictable today. Thank you for the guidance. have a great day vijay

It worked perfectly.. I came across a new problem altogether. Here is whats happens 1) I program my FMC for KSBN -> KORD (PRADY, ILS RWY 28R VOLGR transition). It is a short flight 2) I dialled the ILS frequencies (111.10) for the Captain as well as First officer, entered the CRS as 273 for both 3) During flight and after crossing VOLGR, I engaged LOC. While the LNAV and VNAV was still active 4) This is where the crazy things happen, as soon as the LOC is captured the plane would completely fly away from the APPROACH course. I mean it would start flying to the left. At this time, I had to re-engage LNAV and press LOC when plane lined with the approach path WPTS. It would now capture localizer as if nothing had happened. The CRS remained unaltered. I would then engage APP to land Can someone please help me understand what’s happening here? I repeated this exercise over 4 times (flew from KIND to KORD, chose ILS 28R, VOLGR transition) it did exactly the same thing as mentioned in 4th bulleted point. I checked the CRS for 28R in Chicago O hare’s details, it is 273 (www.airnav.com)

I haven’t tried the option yet, I will report back with what I will find after this modification...Thanks for the reply.

I am trying to understand if it is only me facing the issue. When I tried to modify the vertical altitude profile (VNAV mode) in the FMC during flight, the frame rates was dropping to below 1FPS. And I turned off my Malware tool running in the background.. Didnt help. for example if one of the legs has 240/FL180, I was trying to modify it to /10000. The screen would freeze for a couple of seconds and the EXEC key would glow. If I clicked it, FPS would be pathetic. Can some one having dealt with this situation share their experience???

I have installed the X-Plane is installed on my desktop (C:/ drive)

IXEG is here to rule...Great job, you guys deserve a pat on the back...These are minor issues, I understand. Next serious question : When is IXEG 747 coming?

I faced the same problem you have highlighted, this evening. if IXEG is the first Airplane opened after Xplane is started, it opens fine. But if I switch to IXEG after having opened any other airplane. The error message Torbinator has highlighted has been appearing. Any help??

See if the solution provided in the attached post fixes any of the problems you are facing...Share your experience. Thanks Vijay