737NUT

Attached log file, you can see where i tried resetting all failures off no joy Rob Log.txt

Look at the front page of x-pilot.com, no new news since Feb2016! ;/ Noice........

Let me give you a little more info, LNAV and VNAV, CDU all working fine even though no display. AP still flew the plane even though nothing was displayed. Radios worked even though nothing was displayed. How do I know? I have real hardware that showed me all the datarefs were still sending and receiving data and functioning. I was able to check TOD in the hardware CDU and make leg changes even though the software cdu was blank. This would not be possible if cdu wasn't powered and working. All lamp dimmers turned to max in cockpit. It is not a switch position in the 3D cockpit because if it was, none of these systems would work with no bus power to them. It is gauge/object drawing issue that popped up overnight.

Very strange problem that just started, None of the LCD displays working, like radios, AP, engine gauges, the PFD and ND inop as well. Rest of plane working finw. Any idea what I should check? No errors in Gizmo or X-Plane log. Thanks Rob GizmoLog.txt

To piggyback on what Morten said, I was an FSX/P3D user and whenever I tried x-plane and I gave up as I had the same result you had. I also have my PPL and so I knew what a real Cessna should feel like. Well long story short, unless you build a yoke with the same amount of travel as a real one, it will NEVER 'feel' real. It will always be a compromise. I hated the way the saitek, ch pro yokes feel in x-plane but in time, you will get used to it. I have been in x-plane now for over 2yrs straight and now that I have a real control wheel with actual real amount of movement, X-Plane is the only way to go. Keep adjusting your settings till it feels right to you. It will never be perfect or real but you can get a happy medium. Rob

Ok, got the latest vs for xp11, 80kts call out worked, nothing else. Getting closer

File attached FlyWithLua_Debug.txt

Thats is exactly how mine is setup.

This is the exact location, Resources\plugins\FlyWithLua\Scripts Something else going on??

Hello, I'm getting this error message, resources/plugins/FlywithLua/scripts/ixeg_vSpeed.lua:33: attempt to call global load_WAV_file (a nil value) XP11pb5 Thanks, Rob

But it is Can't explain it, hope Ben can. Rob

Ok, Found it! You were wrong and right in this situation. First off, on your GUI I had 2.2G vram 11.5G sys ram, No issues which i knew from the start After pulling my hair out troubleshooting knowing this problem started after installing SMP4 and RWC 1.1, I found it by luck and a little skill. The Gizmo version you install with your software doesn't work in my system/combo, Once I went back to Gizmo version 15.12.22.1106, It all worked good again without any errors. Bummer part is i lost 15fps with the old Gizmo vs the new one. I guess now I need to get with Ben and try and figure this out as i would like the increased performance. Thanks, Rob

The Gizmo with button push events will happen if you continuously send presses with out a small delay. It doesnt like being hit with multiple key presses. Speed bug is x-plane dataref and digital readout is IXEG Rob

Files attached, clear skies tonight, I have 6G vram of which 3.4 was free, 16G sys mem which was only being 45% utilized Again, if disable SMP4 and let XP11 do the real weather, no crash. Thanks Rob Log.txt METAR.rwx

Using real world weather, RWC 1.1, SMP4, and XP11pb2 KSBN to KIND, 20 miles from KIND X-Plane crashed. Tried 2 times, exact same result. Shut Silverlining plugin and RWC plugin off via plugin manager, same flight, real world weather 12/18/16 approx 2300zulu default x-plane weather engine, no issues. Is there a log file besides the one generated by x-plane that you will need? To me it acted like it encountered an issue when starting to load KIND weather. unfortunately i lost the log file so will try again tomorrow. I will say this, FPS was DOUBLE with SMP4!! Sweet! Thanks, Rob

Thanks Luis!

Hi All, Another milestone passed in the 733 Sim! We got a real CDU fully interfaced to IXEG 733 and X-Plane 11! So cool and fun using real hardware in a sim. For those we keen eyes, yes that i snot 100% correct CDU but it is very close and was only 75.00 compared to 800++ for a real 737 one. This one was actually retrofitted in 732, 727, DC9, MD80, and others. There are 2 short videos showing a completed route input. Super fun and thanks to IXEG making the datarefs available, a dream come true. https://www.youtube.com/watch?v=atvVsyPCtno PART 2 https://www.youtube.com/watch?v=nSy9C59Hzk0

Thanks guys, @Rodeo, lots of programming LOL Rob

Took this video tonight of the IXEG in use for the WorldFlight event we are participating in. It has done pretty good considering the abuse. 120hrs of runtime in one week and only 4 gizmo soft crashes probably do to us and one total lockup. Have had a blast flying it around the world for charity. Rob

Got my webpage up and running, not 100% complete but feel free to check it out. http://midwest737simulations.com/worldflight/faces/index.xhtml

Hi all, Nov 5th through the 12th myself and a few others will be flying around the world in 7 days flying 24/7 in the awesome ixeg 737. My Sim is a full size 737 cockpit built with all real parts that all work in unison with the IXEG 733. We need your help!!!! Come join us as we need more pilots. Even if it is just as a co-pilot working the flaps and gear Our charity this year is the Memorial Children,s Hospital here in South Bend. https://www.facebook.com/memorialchildrenshospital/ They are not for profit hospital for children and no child is turned away. If you can't join us, please find it in your heart to donate to this great cause during our event. I will post a link here in this thread and we will be streaming live on TwitchTV I hope this doesn't bother the developers of the ixeg and it would be awesome if you could come join us as well. Message me or post here if you want more details. Thank you, Rob

Hello, Quick question, i'm trying to interface my Fire Warning panel located in the radio bay and ran into a couple of issues. The ovht/fire test switch and ext test switch act like commands but I don't see them in the commands list in x-plane. When I write directly to the datarefs it is only a momentary action and it should be continuous. Thanks Rob

thanks! missed that

I have searched the datarefs but cant seem to find the act dataref for the GPWS Test button Any help appreciated. Thanks Rob