maletin

i was told to reinstall my download, but it did not work. now i updated gizmo64 and i get the following message:

have you read the fine manual? http://wiki.vacc-austria.org/index.php?title=LOWI_for_pilots#2._LOC_DME_West_Approach Make sure you have the localizer OEJ 109.70 tuned and receive a signal before leaving KTI (If not, report to ATC and expect vectors to RTT NDB for a LOC DME East approach). [...] No, there is no glideslope - descend with v/s or manually.

You don't have a github-account? May I send you modifications? The first modification belongs only to the digists: https://github.com/maletin/X-Plane-CRJ2-FMC/commit/afc4f5ecb52446d4189d5f5950ae1027b1adcf3e

how many flight models per frame do you use? http://wiki.x-plane.com/Chapter_5:_X-Plane_Menus#Flight_Model

are you sure, you started the engine after N1 reached 15%? something else, if both engines are envolved: are you sure, the reverse-axis was absolutly at the limit?

why is there so much space between the keys? when i hit the numbers at the top, i often get no key. i would prefer to get the wrong number from the row above. is it easy to increase these areas?

please turn gravity xflow off before you move the plane. this should be corrcted in the manual. http://forums.x-pilot.com/topic/3119-fuel-transfer-to-one-side/

http://www.7-zip.org/

The filename is LEVC_AKESOFT_febrero-2011.7z

it would be nice to have a CHANGELOG. I believe, there is a difference and I found a relevant http://forums.x-plane.org/index.php?showtopic=58385&p=644885'>thread at x-plane.org.

i'm flying with vatsim => i'm using 32bit x-plane. "Index -> Status" reports "program NS 1.4.5-aee94cb". So the right question may be: is there a difference between 1.4.5 and 1.5.2? I tried two hours to add the fixes and holdings, but i will try it again with http://forum.aerosoft.com/index.php?/topic/63223-2013-01-20-crj-200-vatsim-lowi/#entry450731'>klaus74.

i still have the same problem with: crj-200 1.5.3 x-plane 10.20.beta11 32bit win7 64bit but the version 1.5.3 is more or less 1.4.5 with 64bit-support. my friend with version 1.5.2 does not have this problem.

this must be the oher place: http://forums.x-plane.org/index.php?showtopic=64579&p=706890

i think, i had the same problem in the past. i now use an own axis for "reverse". below 80 knots i put reverse and toggle to idle/none (i had to calibrate the axis, that there is really no thrust left). below 40 knots my rpm is low enough and i use a button to turn off reverse. by the way: data.x-plane.com is using NAVDATA 2012.08 today. do you really use 1212? and jrollon 1.5.2 delivered NAVIGRAPH 1208? i thought it was 1108, but i'm not sure. x-plane 10.11 crj 1.5.3 navigraph 2012.10

The X-Plane Joystick-Axis Configuration-Page has a Axis called "Nosewheel Tiller". See page 19 of 60: