TXGrunt Posted July 8, 2015 Report Share Posted July 8, 2015 Hello all!I know that this has been mentioned before but my control surfaces (rudder and elevator) are at extreme positions when on the ground. My elevator on the exterior view is at the full up position, even though my joystick and internal view yoke are centered. The rudder is the same thing except that its at the full left position on the exterior view but inside its centered. When I brake my rudder goes to the full right position. This all happens when Im on the ground only. When flying, the aircraft is fine. I dont experience this issue with other aircraft. Any help would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
mmerelles Posted July 8, 2015 Report Share Posted July 8, 2015 I have a vague idea i have experienced this a few times in the past long time ago and i realized it was due to me engaging accidentally the FD + A/P while still on the ground, so the systems will command the control surfaces to reach configured ALT (elevator full up position trying to climb) and full left or right deflection (aircraft trying to turn to HDG bug interception course) Once this happens, the control surfaces doesn't go back to centered position disengaging FD & A/P, you have to take off for clearing up the surfaces configuration. Seems to be only a "esthetic issue" because the aircraft rolls, climbs and flight perfect. Once you re-engage FD & A/P the problem vanishes. I am not at the simulator at this time to test my memories vague theories now, the developers may have a better clue. Quote Link to comment Share on other sites More sharing options...
Cameron Posted July 8, 2015 Report Share Posted July 8, 2015 In addition to the above, be sure that wind is not causing this movement. Quote Link to comment Share on other sites More sharing options...
TXGrunt Posted July 8, 2015 Author Report Share Posted July 8, 2015 I have a vague idea i have experienced this a few times in the past long time ago and i realized it was due to me engaging accidentally the FD + A/P while still on the ground, so the systems will command the control surfaces to reach configured ALT (elevator full up position trying to climb) and full left or right deflection (aircraft trying to turn to HDG bug interception course) Once this happens, the control surfaces doesn't go back to centered position disengaging FD & A/P, you have to take off for clearing up the surfaces configuration. Seems to be only a "esthetic issue" because the aircraft rolls, climbs and flight perfect. Once you re-engage FD & A/P the problem vanishes. I am not at the simulator at this time to test my memories vague theories now, the developers may have a better clue.Ok, I will keep an eye on this for the next flight. I hope thats what it is!Thank you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.