[SOLVED] Primary display don't start...

[Luca Pierino]

Hello,

I have a problem starting CRJ 200. The instrumentation is no power supply (MFDdark).

I have this problem after updating to the latest data from version Navigraph

vasFMC Flightmanagment / JRollon Plans - native **

Cycle: 1208

The problem presents itself differently depending on the version of X-plane.

I use my Mac Book Pro early 2011 with i7 3.2Ghz with 8Gb of RAM and OS X 10.8

Ciao ciao ... luca

File logs for Xplane 9

Log.txt

MemoryLog.txt

File logs for Xplane 10 latest Release Candidate

Log.txt

MemoryLog.txt

Edited August 20, 2012 by Luca Pierino

[Cameron]

The problem presents itself differently depending on the version of X-plane.

What does that mean? As in it works in X-Plane 9, but not 10, or starts to work but then stops, or what?

[Luca Pierino]

in version 9 I am warned that the data navdata were not loaded correctly, I fixed the problem reinstalling. :-P

the two main screens do not start in both versions of the simulator at the moment.

[Cameron]

Luca,

Did this only start happening after you upgraded to OS 10.8?

I see one problem here, and that is that your shrink-wrap plug-in is refusing to start. This appears to be a permissions issue on your computer. I note you purchased in 2011, and have previously activated, so I'm curious.

[Luca Pierino]

Yes, I have also updated the operating system...

What can I do ...

[Cameron]

Yes, I have also updated the operating system...

What can I do ...

To confirm: You did not have this problem prior to 10.8, correct? I assume the answer is no, since you appear to have a valid license prior to your OS upgrade...

[Luca Pierino]

Before, I had no problem.

But having upgraded the system and navdata, I do not know what might have bothered.

However, my license is still valid. Or wrong? :-P

[Cameron]

The license is still valid.

I assume you have tried completely uninstalling the CRJ and re-installing?

This is definitely a system permissions issue.

[Luca Pierino]

Yes I have tried over and over again.

I uninstalled using the wizard, there is another way of doing this?

And there is no way to repair privileges manually ?

[Cameron]

Unfortunately I don't know all of what privileges have been adjusted during your OS upgrade.

I'll investigate this a bit and get back to you soon...

[Luca Pierino]

Cameron,

I just solved.

The problem was due to a shared iSCSI volume that has the same name as my secondary hard drive ..

/ Volumes/Programmi-1 <iscsi drive

/ Volumes /PROGRAMMI 1 <2nd hd

I simply rename the secondary hd... at the start of Xplane I had to re-enable the airplane and everything is back to work.

thanks for your patience

[Cameron]

Great! Thanks for the update!

[scubajuan_new]

I seem to have the same problem ( the two main display not powering up) I installed x-plane and the crj also on mac os 10.8, I tried with the EPU, APU with both engines running, and the respective generators connected and nothing. I don't know how to attach the log file.

[Cameron]

I seem to have the same problem ( the two main display not powering up) I installed x-plane and the crj also on mac os 10.8, I tried with the EPU, APU with both engines running, and the respective generators connected and nothing. I don't know how to attach the log file.

X-Plane 10 or 9?

Happens only after upgrade of 10.8, or not?

You may be experiencing the following problem (I saw you're on a brand new retina display, so this is likely it):

Please also be aware that you MUST re-install from the installer on a brand new computer. Dragging and dropping or transferring will NOT work.

[scubajuan_new]

Thanks for the quick response cameron. That's right, I am on a brand new macbook pro retina 2.6ghz. Mac OSX 10.8, running X-Plane 10.10 beta 8.

I did upgraded to OSX 10.8 first thing after receiving the machine prior to installing X-Plane and the x-aviation planes.

I tried renaming the custom scenery folder and creating an empty one, removing all additional plugins (x-ivap, x737FMC) and changing the rendering options for texture resolution to low. Crossed my fingers and no luck.

I still can't find the way to attach the log file, so my apologies for posting it like this:

log.txt for X-Plane 10.10 Beta 8 X-Plane 101008 compiled on Aug 11 2012 13:09:59

This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions.

If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.

If you got a hard system crash and want to report this to Laminar Research, then be sure to send your LIBRARY/LOGS/CRASH REPORTER file generated by the crash.

Mac OS X 10.8.0

CPU type: 526772277 (unknown PowerPC) CPU speed (mhz): 2600 Bus speed (mhz): 100 RAM (MB): 8192

X-System folder:'/Applications/X-Plane 10/', case sensitive=0

-------------------------------------------------------------------

Application was launched with the following command line options...

'-psn_0_6645334'

-------------------------------------------------------------------

AGL_RGBA : 1 AGL_DOUBLEBUFFER : 1 AGL_RED_SIZE : 8 AGL_GREEN_SIZE : 8

AGL_BLUE_SIZE : 8 AGL_ALPHA_SIZE : 8 AGL_DEPTH_SIZE : 24

VRAM : 268435456

Disabling instancing for DX10 NV hw - it is software emulated.

OpenGL Vendor : NVIDIA Corporation

OpenGL Render : NVIDIA GeForce GT 650M OpenGL Engine

OpenGL Version : 2.1 NVIDIA-8.0.51 (210)

OpenGL Extensions: GL_ARB_color_buffer_float GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_instanced_arrays GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_provoking_vertex GL_ARB_seamless_cube_map GL_ARB_shader_objects GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shadow GL_ARB_sync GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_transpose_matrix GL_ARB_vertex_array_bgra GL_ARB_vertex_blend GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_EXT_depth_bounds_test GL_EXT_draw_buffers2 GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture_array GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_s3tc GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_rectangle GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_EXT_transform_feedback GL_EXT_vertex_array_bgra GL_APPLE_aux_depth_stencil GL_APPLE_client_storage GL_APPLE_element_array GL_APPLE_fence GL_APPLE_float_pixels GL_APPLE_flush_buffer_range GL_APPLE_flush_render GL_APPLE_object_purgeable GL_APPLE_packed_pixels GL_APPLE_pixel_buffer GL_APPLE_rgb_422 GL_APPLE_row_bytes GL_APPLE_specular_vector GL_APPLE_texture_range GL_APPLE_transform_hint GL_APPLE_vertex_array_object GL_APPLE_vertex_array_range GL_APPLE_vertex_point_size GL_APPLE_vertex_program_evaluators GL_APPLE_ycbcr_422 GL_ATI_separate_stencil GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once GL_IBM_rasterpos_clip GL_NV_blend_square GL_NV_conditional_render GL_NV_depth_clamp GL_NV_fog_distance GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_light_max_exponent GL_NV_multisample_filter_hint GL_NV_point_sprite GL_NV_texgen_reflection GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod

threaded_avail : 1 tex_clamp_avail : 1 add_env_avail : 1

combine_avail : 1 dis_fog_avail : 1 instance_avail : 0

two-sided stencil: 1 separate stencil : 1 tex_comp_avail : 1

vbo_avail : 1 pbo_avail : 1 automini_avail : 1

aniso_avail : 1 fsaa_avail : 1 occlude_avail : 1

sprites_avail : 1

sblend_avail : 1/1

vprog_avail : 1 (16384)

fprog_avail : 1 (16384/16384/16384/16384)

depth_tex_avail : 1

shad_objs_avail : 1

vshader_avail : 1 (16/4096/124/16/16/4096)

fshader_avail : 1 (4096)

glsl_avail : 1 (1.20/120)

first-gen shaders: 0

gshader_avail : 1 buniform_avail : 1 shad_lod_avail : 1

gpu_shad4_avail : 1 framebuf_avail : 1 frameblit_avail : 1

drawbuf_avail : 1 drawbuf2_avail : 1 tex_float_avail : 1

non_pots_avail : 1 packed_stencil : 1 texture_rg : 1

framebuffer_srgb : 1 copy_buf_avail : 0 pinned_avail : 0 sync/fence : 1

max tex units : 8 (16/8)

max iso filtering: 16.000000

max texture size : 16384 (hardware limit)

max point size : 63.375000

idx in vram : 1

This video card is: DX10 - No instancing (found glMapBufferRange)

CPU count : 8

Fetching plugins for /Applications/X-Plane 10/Resources/plugins

Loaded: /Applications/X-Plane 10/Resources/plugins/PluginAdmin/mac.xpl.

PilotView - parsing setup file

PilotView - parsing successful

Loaded: /Applications/X-Plane 10/Resources/plugins/PilotViewMac.xpl.

shrink-wrap: Built: (May 1 2011 15:20:00)

shrink-wrap: *** Unable to locate Gizmo.plugin.

Failed: /Applications/X-Plane 10/Resources/plugins/shrink-wrap.plugin/mac.xpl. (The plugin refused to start by returning 0 from XPluginStart.)

OpenAL vendor : Apple Computer Inc.

OpenAL renderer : Software

OpenAL version : 1.1

OpenAL hardware : Built-in Output

OpenAL extensions: ALC_EXT_CAPTURE ALC_ENUMERATION_EXT ALC_EXT_MAC_OSX ALC_EXT_ASA ALC_EXT_ASA_DISTORTION ALC_EXT_ASA_ROGER_BEEP AL_EXT_OFFSET AL_EXT_LINEAR_DISTANCE AL_EXT_EXPONENT_DISTANCE AL_EXT_float32 AL_EXT_STATIC_BUFFER AL_EXT_SOURCE_NOTIFICATIONS

Initializing off screen mememory.

Initializing off screen mememory complete.

I found the following scenery packages (prioritized in this order):

0 Global Scenery/Bug Fixes/

1 Global Scenery/Extra Islands/

2 Global Scenery/X-Plane 10 Global Scenery/

3 Resources/default scenery/1000 autogen/

4 Resources/default scenery/1000 decals/

5 Resources/default scenery/1000 forests/

6 Resources/default scenery/1000 roads/

7 Resources/default scenery/1000 urban terrain/

8 Resources/default scenery/1000 world terrain/

9 Resources/default scenery/700 roads/

10 Resources/default scenery/900 beaches/

11 Resources/default scenery/900 europe objects/

12 Resources/default scenery/900 forests/

13 Resources/default scenery/900 roads/

14 Resources/default scenery/900 us objects/

15 Resources/default scenery/900 world object placeholders/

16 Resources/default scenery/airport decals/

17 Resources/default scenery/airport scenery/

18 Resources/default scenery/default apt dat/

19 Resources/default scenery/default atc/

20 Resources/default scenery/sim objects/

Could not find tile 48 name is close-frame

(in sign '{@B}{no-entry}' from airport KBFI)

Syntax error - unknown glyph at AL}A7

Syntax error - missing closing brace.

(in sign '{@L}A7{@R}13L-31R{@@}31L-13R{AL}A7' from airport KBFI)

ATC audio initialized.

0:00:00.000 D/HID: HID Bridge Running

0:00:00.000 E/APT: Found a bad-location ramp start: NFMO

0:00:00.000 E/APT: Found a bad-location ramp start: NFFR

0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at RJCJ and RJCC!

0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at RJCJ and RJCC!

0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at 9L2 and KEDW!

0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at KNSE and KNDZ!

0:00:00.000 W/ATC: Rewrote RJCJ atc_ControllerRole_Del's freq: 12190 to 11800 for being in conflict!

0:00:00.000 W/ATC: Rewrote RJCJ atc_ControllerRole_Twr's freq: 12620 to 11802 for being in conflict!

0:00:00.000 W/ATC: Rewrote 9L2 atc_ControllerRole_Twr's freq: 12070 to 11800 for being in conflict!

0:00:00.000 W/ATC: Rewrote KNSE atc_ControllerRole_Twr's freq: 12140 to 11800 for being in conflict!

0:00:00.000 D/State: Received: 0:1

0:00:00.000 I/ACF: Loading airplane number 0 with Aircraft/X-Aviation/CRJ-200/CRJ200.acf

Fetching plugins for /Applications/X-Plane 10/Aircraft/X-Aviation/CRJ-200/plugins

OpenAL available device: Built-in Output

OpenAL default device: Built-in Output

OpenAL current device: Built-in Output

Loaded: /Applications/X-Plane 10/Aircraft/X-Aviation/CRJ-200/plugins/CRJAvionics/mac.xpl.

Aircraft/X-Aviation/CRJ-200/objects/Cockpit_Main.obj:11781

VT 0.8453 0.1314 2.3871 0.000 0.000 -0.000 0.3622 0.6477

WARNING: object Aircraft/X-Aviation/CRJ-200/objects/Cockpit_Main.obj has normals of the wrong length.

Aircraft/X-Aviation/CRJ-200/objects/Cockpit_PanelCentral.obj:17027

VT -0.0214 -0.0073 2.3929 0.000 0.000 -0.000 0.2487 0.7596

WARNING: object Aircraft/X-Aviation/CRJ-200/objects/Cockpit_PanelCentral.obj has normals of the wrong length.

Aircraft/X-Aviation/CRJ-200/objects/Cockpit_PanelSuperior.obj:7425

VT -0.1676 0.7291 2.4940 0.000 0.000 -0.000 0.6399 0.8161

WARNING: object Aircraft/X-Aviation/CRJ-200/objects/Cockpit_PanelSuperior.obj has normals of the wrong length.

Aircraft/X-Aviation/CRJ-200/objects/Cabin.obj:22035

VT 0.3409 0.7517 16.1731 0.000 0.000 -0.000 0.8924 0.0639

WARNING: object Aircraft/X-Aviation/CRJ-200/objects/Cabin.obj has normals of the wrong length.

0:00:00.000 I/FLT: Init 0 type: 10

0:00:00.000 I/SCN: DSF load time: 1938068 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+10-110/+18-101.dsf (171874 tris)

0:00:00.000 I/SCN: DSF load time: 1777882 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+10-100/+18-100.dsf (169574 tris)

0:00:00.000 I/SCN: DSF load time: 1903089 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+10-100/+18-099.dsf (178436 tris)

0:00:00.000 I/SCN: DSF load time: 1585313 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+10-110/+19-101.dsf (167342 tris)

0:00:00.000 I/SCN: DSF load time: 1979715 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+10-100/+19-100.dsf (205894 tris)

0:00:00.000 I/SCN: DSF load time: 1824057 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+10-100/+19-099.dsf (176351 tris)

0:00:00.000 I/SCN: Preload time: 12256659

Pilot View - Found 'PilotView.dat' file, will use that

Pilot View - Found 'PilotViewLimits.dat' file, will use that

Pilot View - No 'PilotViewEffects.dat' file found

Clean exit from threads.

0:01:49.291 D/HID: HID Bridge Shutdown

[Cameron]

shrink-wrap: *** Unable to locate Gizmo.plugin.

You don't have Gizmo installed. That's the problem.

[scubajuan_new]

Voila! After reinstalling several times du to x-plane crashing after running out of memory and freezing the entire computer, tuning down the rendering options, deleting the x-plane preferences folder (I could not set the speed bug, it reset to 0 every time I tried to set the speed, which I read on another thread), I manage to make my first successful flight. Yuhu!.

I can't wait for a 64bit version of x-plane to come out. this running out of memory and system crashing really sucks, and lowering the rendering options to manage the vram use to around 460MB when the GPU has 1GB to keep the program somewhat stable is a bit disappointing. I understand that x-plane is a work in process and that the updates come frequently and substantial and that is only a matter of time until x64 comes out, but hey! It has been over a year since I bought the CRJ200 and finally made a successful flight and landing. I am a happy camper.

Thanks for the beautiful airplane to all involved and keep up the good work.