pcartier1960 Posted Monday at 05:16 PM Report Posted Monday at 05:16 PM Hello Support, I’m attempting to perform an IRS alignment. I’ve started by turning on the avionics power, followed by switching on the inverter. However, after waiting for an extended period, my PFD does not initialize. Could you help me identify if I’ve missed a step or if there’s something I’m overlooking? Thanks! Quote
Coop Posted Monday at 08:55 PM Report Posted Monday at 08:55 PM 3 hours ago, pcartier1960 said: Hello Support, I’m attempting to perform an IRS alignment. I’ve started by turning on the avionics power, followed by switching on the inverter. However, after waiting for an extended period, my PFD does not initialize. Could you help me identify if I’ve missed a step or if there’s something I’m overlooking? Thanks! The attitude gyro alignment process can take a few minutes, but if it's beyond that, I would recommend checking that the circuit breakers are powered. The main switches are as you highlighted avionics and the AC inverter are required to power the gyros. On the lower left pilot's switch panel, you can put the gyro into "fast erect" mode which will spin it up faster to align. The key thing to remember is to turn that off after alignment as the autopilot will not work with the gyro in that mode (it'll refuse to engage). Quote
pcartier1960 Posted yesterday at 12:15 AM Author Report Posted yesterday at 12:15 AM Thanks for the info Coop! before I read this I already re-installed the plane and have not had a problem with the IRS aligment since. Thanks for the help! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.