Leostixx86 Posted July 13, 2022 Report Posted July 13, 2022 Hey guys. I am having a little issue with the CL650. Upon loading a saved airframe and getting apu power up I then go to the FMS to do the data base check and begin my Pos Init. However when pressing the LSK next to Status the screen goes blank for about 5 secs. and then returns to the index page displaying the message FMS Not Responding. There are no popped circuit breakers. Currently the only way I have found to fix it is to get a new airframe. However on the second flight after that its the same thing. IDK if its coming dow to my shutdown procedure or what but I am following the checklist. Also the FO FMS is not affected. I can plane the flight normally on his side but the CPT side is INOP. Please help. I have attached a few pics to describe the issue along with XP11 log.txt. Log.txt 1 Quote
Pils Posted July 13, 2022 Report Posted July 13, 2022 100% sure the breaker at CB1-M2 is in? Maybe try cycling it out and on again. Quote
BlackBird_GR Posted July 13, 2022 Report Posted July 13, 2022 It happen to me once on air, but after pressing circuit breaker (behind pilot seat) in, all was ok. However the mysterious is how was cb pop out! Quote
Pils Posted August 9, 2022 Report Posted August 9, 2022 3 hours ago, ConvectiveAv8r said: Any fix to this? Yes. Resetting the breaker. Quote
alexcunille Posted November 5, 2022 Report Posted November 5, 2022 It is not CB1-M2, it is CBP1 M3!!! Quote
MotoNero Posted November 14, 2023 Report Posted November 14, 2023 Can confirm: Resetting the related breaker solves the mentioned problem. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.