Grizz Posted January 10, 2022 Report Posted January 10, 2022 (edited) First, congrats to Toto, Graeme and all the team for a fabulous simulation and implementation of the CL650. It seems that I also have a problem with the Alpha Yoke bindings. Try to bind the "CL650/contwheel/0/ap_disc" to the AP disc on the red button right side of the yoke. I have tried binding with two methods (independently being careful not to create a conflict) , 1 - binding directly into x-plane setting window or 2 - binding via the Honeycomb configurator with a custom variable applied to the ap disconnect button. Activating the button in the sim works find with the actuate command in the DataRefTools. Curiously the trim (button 5 and 6) and the Control wheel stab trim disconnect button (4) works find !!???? Im out of ideas, your help would be very much appreciated. Thank's in advance. Edited January 12, 2022 by Pils
Pils Posted January 10, 2022 Report Posted January 10, 2022 Firstly, please don’t post to unrelated threads. Secondly, I don’t see anything in your screen shot showing a bind to the red button. Please post the bindings as tested. Thanks.
Grizz Posted January 11, 2022 Author Report Posted January 11, 2022 As per requested, thank's in advance for your help. Method 1 is via the Setting Window of x-plane. Method 2 is via the Honeycomb configurator once I replace the setting window of x-plane to do nothing so that it doesn't conflict with the honeycomb configurator binding. Hope this is clear, let me know if you need more. Thank's again.
Grizz Posted January 11, 2022 Author Report Posted January 11, 2022 Issue resolved !!??... I have configured both X-Plane window setting and Honeycomb binding configurator as shown in pics above and all seems to work. I usually try and do one or the other to avoid conflict, but this (having both configured) looks like the solution. Once more thank's for an amazing model. Cheers....
Recommended Posts