Prosco Posted March 29, 2021 Report Posted March 29, 2021 Hello, I just tested v1.6.4. Many thanks for your work. I allow myself to specify for those who discover the SaaB 340A. The Lever Auto-Latch in AUTO mode: allows just after the touch down to bring the throttles to reverse. With Auto-Latch in MANUAL mode: just after touch down, the throttle must be on IDLE or higher. There, first you have to activate the Lever Auto-Latch (keyboard shortcut : "les / sf34a / acft / engn / mnp / Right & Left Power Lever Flight Idle Latch") then bring the throttles to REVERSE.
SupraJari Posted March 29, 2021 Report Posted March 29, 2021 (edited) Thanks for the info. Thinking about this with Honeycomb Bravo, would this work? Bravo has buttons which are "pressed" when power levers are full pulled down (buttons 9 & 10). Configure them as "flight idle latch left and right" so when you pull levers fully down, max reverse is engaged? The problem is that when you press levers down, buttons are pressed all the time. Some things go up and down then...I will test this, but can't currentely. After reading this I hope this makes sense lol Edited March 29, 2021 by SupraJari
pdg17 Posted March 29, 2021 Report Posted March 29, 2021 On the Bravo I just assigned it to the go around button on the black GA power levers, works a treat.
SupraJari Posted March 29, 2021 Report Posted March 29, 2021 OK, I have CTIT there, but will try for those hidden reverse buttons
SupraJari Posted March 31, 2021 Report Posted March 31, 2021 Answering to myself, I have not been able to get those hidden buttons to work. But it seems that "autolatch" introduced 1.6.4 has proven to be fantastic so I'm very happy the way it works now. I have not had any issues with it in about 10 flights I've taken.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now