Hold patern - G1000 TBM 900

[Manuel Correia]

Dear Captains.

Can the TBM G1000 programer a automatic Hold Patern procedure at a fix in the route? How do it?

Thank you.

Manuel Correia

[TBMpilot]

If it is a coded into the sim, this is how it works on Garmin:

1) Go FPL page

2) highlight fix you which to hold at

3) Press MENU and then HOLD AT WAYPOINT

4) Enter prefered INBOUND or OUTBOUND course and LEG TIME. 

Ignore EFC (expect further clearance, it's just a helpful timer).

[Manuel Correia]

12 hours ago, TBMpilot said:

If it is a coded into the sim, this is how it works on Garmin:

1) Go FPL page

2) highlight fix you which to hold at

3) Press MENU and then HOLD AT WAYPOINT

4) Enter prefered INBOUND or OUTBOUND course and LEG TIME. 

Ignore EFC (expect further clearance, it's just a helpful timer).

Thank you TBMpilot.

I can't to do this. Please see de picture with a exemple. When I press MENU doesn't appear "HOLD AT WAYPOINT". I have de AIRAC 2009 from Navigraph.
I think so that the TBM take the data from X-Plane, insn't it?

- X-Plane 11.50 b17.

I appreciate your help.

Manuel

Edited August 17, 2020 by Manuel Correia

[TBMpilot]

Manuel, I suspect the hold function is not coded into HotStart TBM. There should be 3 hold functions:

1) as part of the missed approach or STAR

2) Hold at Waypoint

3) Hold at Present Position

Perhaps submit a feature request to the HotStart?

[r2500]

The TBM G1000 is, as I understand it, essentially just the Laminar G1000.  Try the G1000 in the C172.  If the hold functions are not there, the request should go to Laminar, not HotStart.

[Manuel Correia]

2 hours ago, TBMpilot said:

Manuel, I suspect the hold function is not coded into HotStart TBM. There should be 3 hold functions:

1) as part of the missed approach or STAR

2) Hold at Waypoint

3) Hold at Present Position

Perhaps submit a feature request to the HotStart?

Oh yes, TBMpilot.

I'll send a feature request to the HotStart.

Thanks a lot.

Manuel

51 minutes ago, r2500 said:

The TBM G1000 is, as I understand it, essentially just the Laminar G1000.  Try the G1000 in the C172.  If the hold functions are not there, the request should go to Laminar, not HotStart.

Thank you, r2500. I'll tried this. Appreciate your help. Maybe I must to request to Laminar. We'll see.

Gratefull

Manuel

[Manuel Correia]

Dears TBMpilot & r2500.

The issue is, in fact, about Laminar, that  don't have the hold function coded. I'll send a request for the Laminar - reforced for Hotstart...

I know that isn't the best oportunity, but I'll tray.

Thank you for your help. Regards,

Manuel