jcallum Posted January 26, 2020 Report Posted January 26, 2020 I currently use the mouse to move the throttle on the right side of the h configuration- to introduce fuel on start, etc. However, I would like to get away from using the mouse and keyboard. Is there a way to use a button to get the throttle to work on the right side of the h? Can I use a different axis (mixture?) for that side? John. Sent from my SM-G960W using Tapatalk Quote
flexcopmnpd Posted January 26, 2020 Report Posted January 26, 2020 John, checkout this thread. there is a lua script that works that assigns the function to the mixture to go from cutoff all the way to flight idle. Then you need to assign a button or key command for the generic thrust reveres in order to get the throttle to drop into the taxi and reverser range. I had to scour multiple forums and sites to understand what I needed to do. Quote
jcallum Posted January 26, 2020 Author Report Posted January 26, 2020 Thanks. That’s what I was looking for!John Sent from my iPad using Tapatalk Quote
Rossco Posted January 26, 2020 Report Posted January 26, 2020 If you have SPAD.neXt you can also get your throttle to enter beta/reverse range by assigning the command at the desired position of your axis thus eliminating having to press a button. Quote
jcallum Posted January 27, 2020 Author Report Posted January 27, 2020 Yes I have Spad.Next but my problem is accessing the right side of the h - the cutoff and low idle detentes. I think I got the answer above.Sent from my iPad using Tapatalk Quote
RobW05 Posted January 27, 2020 Report Posted January 27, 2020 You can achieve that with Spad.Next too, you just need to know which datarefs to look at. (same as with the script I guess ) Quote
jcallum Posted January 27, 2020 Author Report Posted January 27, 2020 Well I am hoping that I can just assign some joystick buttons in native XP. For me the simplest solution is always better. I am trying not to use FWL as I find it affects my frame rate and not in a good way.Sent from my iPad using Tapatalk Quote
RobW05 Posted January 27, 2020 Report Posted January 27, 2020 25 minutes ago, jcallum said: Well I am hoping that I can just assign some joystick buttons in native XP. If buttons are sufficient for you then you don't need FWL or Spadnext. Just assign a button to the mixture up command and another button to the mixture down command. Using these two buttons you will then be able to control the right side of the throttle from cutoff to flight idle and back. Quote
jcallum Posted January 27, 2020 Author Report Posted January 27, 2020 Great. Thanks. Sent from my SM-G960W using Tapatalk Quote
solarviper Posted February 4, 2020 Report Posted February 4, 2020 do you know where i can get the Lula script? i search everywhere couldn't find it, thanks Quote
mokeiko Posted February 4, 2020 Report Posted February 4, 2020 Read second post of this thread. fly safe Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.