[SOLVED] CRJ-200 installed then x-plane crashed

[Scout98]

Don't know if this will help anyone, but x-plane was crashing for me every time I tried loading the plane.  Then I realized I had forgotten to uninstall the hardware tester.  that did the trick

[HeartofDavid]

Well i guess i have found my root of all evil. I totally forgot to take out a plugin XPUIPC which i use to run an acars system for a virtual airline. So far so good without it in. I reinstalled to correct the other install problems. But as of now that was the culprit. So i shall do a test flight to be sure. But i guess XPUIPC will have to be added to the crash list

I also have the same problem when trying to use it with Air Hauler which is the whole reason I bought the CRJ-200.  ha ha 

Looking forward to it getting fixed!  :-)

[fat-strat]

I have tried everything, including a fresh new install from the disc, and from X-Plane Updater Mac.

Still can't use the plane. Crashes every time I load the aircraft.

X-plane 9.69

Mac OS 10.5.8

NO installed 3rd-party plugins

-Log.txt (attached)

Log.txt

[philipp]

Log.txt shows nothing unusual.

Please post the crash_log.txt (from X-PLane mainfolder).

Also the Crashdump might be helpful. To get this, click "Report" when the "Application has crashed" dialog pops up, then click "Details" and also post this detailed report here.

Philipp

[fat-strat]

Problem Report for X-Plane 9.69

Problem Details

_____

Process:         X-Plane [1456]

Path:            /Volumes/FCP/X-Plane 9 Demo/X-Plane.app/Contents/MacOS/X-Plane

Identifier:      com.laminar_research.X-Plane

Version:         9.69 (398)

Code Type:       X86 (Native)

Parent Process:  launchd [188]

Interval Since Last Report:          34509 sec

Crashes Since Last Report:           246

Per-App Interval Since Last Report:  2763 sec

Per-App Crashes Since Last Report:   17

Date/Time:       2011-05-12 18:18:14.007 -0700

OS Version:      Mac OS X 10.5.8 (9L31a)

Report Version:  6

Anonymous UUID:  2B793F80-1098-4D16-89CF-96C7C8023726

Exception Type:  EXC_BREAKPOINT (SIGTRAP)

Exception Codes: 0x0000000000000002, 0x0000000000000000

Crashed Thread:  0

Dyld Error Message:

 Symbol not found: __ZSt16__ostream_insertIcSt11char_traitsIcEERSt13basic_ostreamIT_T0_ES6_PKS3_i

 Referenced from: /Volumes/FCP/X-Plane 9 Demo/Aircraft/X-Aviation/CRJ-200/plugins/CRJAvionics/mac.xpl

 Expected in: flat namespace

[fat-strat]

Log.txt shows nothing unusual.

Please post the crash_log.txt (from X-PLane mainfolder).

Also the Crashdump might be helpful. To get this, click "Report" when the "Application has crashed" dialog pops up, then click "Details" and also post this detailed report here.

Philipp

There is no crash_log.txt - none is generated after every crash. Attached is a screenshot of the x-plane folder after crash.

[philipp]

Did you run the hardware test?

[fat-strat]

Did you run the hardware test?

Yes. It was positive - the plane should work.

[philipp]

Dyld Error Message:

 Symbol not found: __ZSt16__ostream_insertIcSt11char_traitsIcEERSt13basic_ostreamIT_T0_ES6_PKS3_i

 Referenced from: /Volumes/FCP/X-Plane 9 Demo/Aircraft/X-Aviation/CRJ-200/plugins/CRJAvionics/mac.xpl

 Expected in: flat namespace

Smells like the C++ standardlib does not match. Never saw this before. Might be because you are running on 10.5. I will check.

Philipp

[philipp]

I got positive reply that the CRJ is running well on 10.5.

Is there any OSX update you didn't install? Can you make sure you are running the "latest and greatest" version?

Philipp

[xfan]

I have many problems with your CRJ200, I feel like an early beta tester! here is one of them:

after loading the CRJ, if I select another aircraft, it loads normally except if that aircraft is the X737, then X-Plane crashes.

Here are the last lines of the log.text :

[CRJ] Loading navdata.

[CRJ] 10613 airports were loaded.

[CRJ] 7856 ndb were loaded.

[CRJ] 4289 vor were loaded.

[CRJ] 6069 ils were loaded.

[CRJ] 202244 intersections were loaded.

[CRJ] 8365 airways were loaded.

HASP USB-key message: hasp_login: no driver installed

HASP USB-key message: hasp_login: no driver installed

XHSI: custom pilot DataRefs initialized

XHSI: custom copilot DataRefs initialized

WARNING: texture Aircraft/Perso comm-Jet/Boeing 737-800_x737_v4_2_2 !!/737_icon.png has a size that is not a power of 2; it may not render correctly.

Loading airplane number 0 with Aircraft/Perso comm-Jet/Boeing 737-800_x737_v4_2_2 !!/737.acf.

Fetching plugins for X-Plane:X-Plane 9.40:Aircraft:Perso comm-Jet:Boeing 737-800_x737_v4_2_2 !!:plugins

Base livery: X-Plane:X-Plane 9.40:Aircraft:Perso comm-Jet:Boeing 737-800_x737_v4_2_2 !!:

livery path: Aircraft:Perso comm-Jet:Boeing 737-800_x737_v4_2_2 !!:liveries:Continental Airlines:

Livery Path (relative): liveries:Continental Airlines:

Livery Path (absolute): X-Plane:X-Plane 9.40:Aircraft:Perso comm-Jet:Boeing 737-800_x737_v4_2_2 !!:liveries:Continental Airlines:conf:x737.cnf

Comparing with normal loading log.text, The crash seems to take place when X-Plane tries to initialize the X737 plugin (yes, it is located in the aircraft folder, not in the resources/plugins folder)

If I delete the vascore folder from the plugin folder, the problem disappears, but of course the CRJ200 loses most of it's functionalities.

First time I encounter a problem when loading the X737 (or any other aircraft).

Next test:

I leave the vascore folder out of the plugin folder, I open X-Plane and load the X737, no problem. I then quit X-Plane and put vascore back in the plugin folder. I launch X-Plane which should open and automatically load X737. Crash!

Conclusion : there is a conflict between the X737 plugin and the CRJ200 plugin.

There are also severe reverse thrust and AP problems related with The CRJ200 plugin, but these are for other threads...

Considering the number of defaults I keep stumbling on, I am afraid that you won't have a quiet night sleep for a long time.

Here are some details on my system :

MAC PRO 6-core Intel Xeon westmere processor. RAM 8 Go. MACOS 10.6.7

No problem with hardware test.

X-Plane v9.68

Good lock and congratulations for this aircraft, when finished, it will be amazing.

[xfan]

Another crash:

It occurs with the FMS in POS INIT

After typing the airport ident, the crash happens when I press the LK2 to enter the information

My system :

MAC PRO 6-core Intel Xeon westmere processor. RAM 8 Go. MACOS 10.6.7

No problem with hardware test.

X-Plane v9.68

[Cameron]

Conclusion : there is a conflict between the X737 plugin and the CRJ200 plugin.

It's only been published everywhere, including here: http://forums.x-pilot.com/index.php?topic=2111.0

There are also severe reverse thrust and AP problems related with The CRJ200 plugin, but these are for other threads...

I suggest you read the topics rather than starting new one's. All of this stuff has pretty much been addressed.

[fat-strat]

I got positive reply that the CRJ is running well on 10.5.

Is there any OSX update you didn't install? Can you make sure you are running the "latest and greatest" version?

Philipp

Just ran Software Update - I can confirm that I am running the latest and greatest version of OSX 10.5.8.

[philipp]

Okay, do you have any development tools installed, that might cause a different libstdc++ is in the runtime linker's search path?

Like, do you have macports, fink, or homebrew installed?

Do you have a custom installation of Qt?

Please open the Terminal, navigate to the CRJAvionics folder and post the output of the following command:

otool -l mac.xpl

(the character behind the minus is a lowercase L, not an I).

Philipp

[fat-strat]

Okay, do you have any development tools installed, that might cause a different libstdc++ is in the runtime linker's search path?

Like, do you have macports, fink, or homebrew installed?

Do you have a custom installation of Qt?

Please open the Terminal, navigate to the CRJAvionics folder and post the output of the following command:

otool -l mac.xpl

I don't have any development tools installed that I know of. I searched macports, fink and homebrew - didn't find anything. Custom QT? I've got QT Pro, with Flip4Mac installed...

Although, while in Terminal I do see an option for Homebrew. In Terminal, > Shell > New Window > Homebrew  

As for using Terminal, not sure what to do here as per your instructions. I've got Terminal open, and if I enter 'otool -l max.xpl' it says command not found. Can you please clarify exactly what I need to do to. Screenshot of my CRJAvionics folder attached.

My latest install is located here: FCP/X-Plane 9 Demo/Aircraft/X-Aviation/CRJ-200/plugins/CRJAvionics...

[Dave12345]

I'm having a similar issue.  I have x-plane v9.5x something original on store bought package.  It loads fine, but I get an error that the CRJ aircraft file is corrupt and it will not load.  I updated to v9.69 and now x-plane crashes to desktop.  I un/re-installed both programs and I don't have any planes/plugins other than the defaults.  Also, the hardware tester said that the crj will work and I uninstalled it prior to installing the above.  Thanks for your help.

Core2duo e6850

4 gigs ram

GeForce GTS 8800 with latest drivers

[Japo32]

well.. lets wait Philipp, that won't be able to answer until Sunday I believe, but with my little knoledge in programming, I would always install over a new demo of X-Plane and see if you have the same problem.

But Dave please post your log.txt. Thanks!

[fat-strat]

well.. lets wait Philipp, that won't be able to answer until Sunday I believe, but with my little knoledge in programming, I would always install over a new demo of X-Plane and see if you have the same problem.

But Dave please post your log.txt. Thanks!

I installed from both - DVD, and the demo at x-plane.com and the result is the same - crashes to desktop... Philip, can you give me an update as to where you are in the troubleshooting process? Is there anything else I can provide you with? I am still waiting to hear back about using Terminal as you instructed me to do so. Please help.

[jsnyder]

Hello im also crashing to desk top every time i flip the battery to on. Ive unistalled and reinstalled the plane, i tried redownloading the plane, ive got ride of all my plug-ins, and ive tried to load it into the demo as well and i get the same result each time.  Here are my Mac specs and ill attach my log.txt and my Crash report.

MAC OSX 10.5.8

2 GHz intel core 2 duo

2 GB 1067 MHz DDR3

Crash_Report.txt

Log.txt

[Japo32]

Hello im also crashing to desk top every time i flip the battery to on. Ive unistalled and reinstalled the plane, i tried redownloading the plane, ive got ride of all my plug-ins, and ive tried to load it into the demo as well and i get the same result each time.  Here are my Mac specs and ill attach my log.txt and my Crash report.

MAC OSX 10.5.8

2 GHz intel core 2 duo

2 GB 1067 MHz DDR3

Did you try with engines running? Also crash?

[jsnyder]

Hello im also crashing to desk top every time i flip the battery to on. Ive unistalled and reinstalled the plane, i tried redownloading the plane, ive got ride of all my plug-ins, and ive tried to load it into the demo as well and i get the same result each time.  Here are my Mac specs and ill attach my log.txt and my Crash report.

MAC OSX 10.5.8

2 GHz intel core 2 duo

2 GB 1067 MHz DDR3

Did you try with engines running? Also crash?

Yes and it still crashes to desktop as soon as it loads but if i start with engines off it will crash as soon as i turn batterys on. It only crashes when i go to turn any thing on.

[Jyrki]

My XPlane is crashing when I load Crj-200 on runway engines running,

or on ramp when I set Battery Master on.

I did the hardware test. It was sucessfull.

Same with demo version.

Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 4 GB

Graphics: kHW_NVidiaGeForce9400Item, NVIDIA GeForce 9400, sppci_pci_device, 256 MB

Exception Type:  EXC_BREAKPOINT (SIGTRAP)

Exception Codes: 0x0000000000000002, 0x0000000000000000

Crashed Thread:  0

Dyld Error Message:

  Symbol not found: __ZSt16__ostream_insertIcSt11char_traitsIcEERSt13basic_ostreamIT_T0_ES6_PKS3_i

  Referenced from:/X-Plane 9 Demo/Aircraft/X-Aviation/CRJ-200/plugins/CRJAvionics/mac.xpl

Problem fixed: Mac OSX must be 10.6. NOT 10.5. Works fine now.

[Japo32]

Hello im also crashing to desk top every time i flip the battery to on. Ive unistalled and reinstalled the plane, i tried redownloading the plane, ive got ride of all my plug-ins, and ive tried to load it into the demo as well and i get the same result each time.  Here are my Mac specs and ill attach my log.txt and my Crash report.

MAC OSX 10.5.8

2 GHz intel core 2 duo

2 GB 1067 MHz DDR3

Did you try with engines running? Also crash?

Yes and it still crashes to desktop as soon as it loads but if i start with engines off it will crash as soon as i turn batterys on. It only crashes when i go to turn any thing on.

Ok.. as Jyrki, please go to 10.6 Thanks!

[jsnyder]

im not running snow leopard though i only have leopard

Ok.. as Jyrki, please go to 10.6 Thanks!