Brake power?

[TMV45]

Hi,
With the previous and the current release, after the start with the power at the taxi gate, the park break does not seem to work for me.
What I do is:

- start the engine with the wheel chocks on;
- If the parking break is on, Is take it off, press the toe brake and apply the parking break (as per manual)
- I take the wheel chocks off

The plane starts immediately to move forward slowly. Toe breaks stop the plane, but the parking break do not.
What am I doing wrong?

Edited December 9, 2019 by TMV45

[Goran_M]

Check all your hardware assignments and make sure nothing is interfering with the brakes. 

[TMV45]

@Goran_M I use a LUA mod for differential breaking, linked to my pedals. It works like a charm with other planes. Also with the TBM it works fine with respect to the directional control. The script allows for beaking pressure depending on the amount of pressure exercised on the pedals.
The only thing is that it does not work with the parkingbrake of the TBM. The default left/right brake of XP11 does work, but that doesn't allow for the differential breaking the lua MOD does.

[Goran_M]

I suspect that is your problem.  Other aircraft use the default braking that X-Plane provides.  There is no reason not to.  The brakes on the TBM are customized because of how they work with the parking brake.  Try disabling your script and see if the problem goes away.