CTOT not working?

[GEL]

Dwnloaded latest Saab 340A (1.5 ) for xplane  v10.5

 CTOT no longer works.

My understanding is: the system "kicks in" ~ 62% +  and increases rpm to what is dial in at the preset...

...none of that is happening.

Thoughts?

 

 

 

[mmerelles]

CTOT works ok

 

make sure:

1. you engaged both switches and also rotated the knob to desired torque (it engages by 64%, but do not exceed minus 15-20% of selected torque)

2. double check you are not overshooting the CLs MAX position, which is not the end of the travel T/M, it is a detent before. Otherwise the aircraft will have no torque.

 

note: i am XP11.20, can not test under xp10.x

 

hope this helps

[GEL]

Just did a whole systems check and CTOT does indeed seem to be working just fine.

They even worked with L/R gens off line... surprised by that.

They engage at the 70%+ torque range and am able to dial +/- at the console and arm/disarm

while in torque range.

So I'm at a loss to explain the non events unless it is a loading issue. (?)

Thanks for the response tho' .... cheers

 

[GEL]

Well...back to the ol' drawing board: For me , this version of the Saab (1.5) appears to be a very unstable model.

Just finished a session where upon as stated before: NO CTOT available.

.. upon arrival: came to a complete stop on rnwy and required TL beyond the flight idle to begin taxi

... tiller disengaged ( i mapped nose wheel hyd to key stroke)

... lost ability to brake ( had left the rnwy at that point so this is a little ambiguous )

... there appears to be an exaggerated  nose up profile to this model

This is not a new model for me in xplane (10.5) ... and I've probably flown this plane 

more than any other in the sim.

Wondering if a reinstall is in order.

Thoughts?

 

 

[Goran_M]

Definitely reinstall.  No one that we know of, is having any of these issues.