Jozer12 Posted August 6, 2016 Report Posted August 6, 2016 (edited) Hi everyone, After flying around in the 733 a fair bit over the past few months i fell completely in love and want to build a cockpit based on it. Now the IXEG team have been great to document the input datarefs for the aircraft enabling you to connect real world switches, but the output part is missing, i want to be able to connect some real world indicators but there are no datarefs available for them as far as i can tell. I would really love to make a full cockpit with IXEG and this is one of the many hurdles. Any help is greatly appreciated Edited August 6, 2016 by Jozer12 Quote
TheFriedchicken Posted August 6, 2016 Report Posted August 6, 2016 I found this also, I wanted to have my Master Caution and Fire warn switches light up, but i could not find the data refs for them. So sad. 1 Quote
Jozer12 Posted August 7, 2016 Author Report Posted August 7, 2016 5 hours ago, TheFriedchicken said: I found this also, I wanted to have my Master Caution and Fire warn switches light up, but i could not find the data refs for them. So sad. I know! Its as if they only wanted to tease us with possibilities of being able to make a cockpit with the inputs Quote
Nils Posted August 7, 2016 Report Posted August 7, 2016 The master caution dataref was miscategorized under bleedair datarefs so I appreciate it was hard to find: ixeg/733/bleedair/caution_master_ann Master fire warning dataref is ixeg/733/firewarning/fire_warning_ann We have a lot of output datarefs really - any needle you see move mechanically in the cockpit is driven by a dataref. The same goes for all 'bulb' annuciators. If there's anything you are still missing, I'd like to suggest that interested cockpit builders cooperate on a wish list of things they would like datarefs for and we will see if it can be accomodated in future patches. 3 Quote
Jozer12 Posted August 7, 2016 Author Report Posted August 7, 2016 1 hour ago, Nils said: The master caution dataref was miscategorized under bleedair datarefs so I appreciate it was hard to find: ixeg/733/bleedair/caution_master_ann Master fire warning dataref is ixeg/733/firewarning/fire_warning_ann We have a lot of output datarefs really - any needle you see move mechanically in the cockpit is driven by a dataref. The same goes for all 'bulb' annuciators. If there's anything you are still missing, I'd like to suggest that interested cockpit builders cooperate on a wish list of things they would like datarefs for and we will see if it can be accomodated in future patches. Hi Nils thanks for the reply, I think rather than there being no documented output datarefs I must have confised the input and outputs, is there any easy way which i can distinguish between the two? And i would love to have a list of every out and in there is so i can replicate it in real life, that would be amazing. Quote
Nils Posted August 7, 2016 Report Posted August 7, 2016 The dataref names are generally suffixed "_act" for input actuators, "_ann" for annunciator lights and "_ind" for indications like mechanical needles. 1 Quote
Jozer12 Posted August 7, 2016 Author Report Posted August 7, 2016 2 minutes ago, Nils said: The dataref names are generally suffixed "_act" for input actuators, "_ann" for annunciator lights and "_ind" for indications like mechanical needles. And the rest should be inputs, more or less? Quote
Nils Posted August 7, 2016 Report Posted August 7, 2016 3 minutes ago, Jozer12 said: And the rest should be inputs, more or less? A mixture if forgotten suffixes, user preferences, integration with other plugins etc. 1 Quote
Jozer12 Posted August 7, 2016 Author Report Posted August 7, 2016 Okay cool, so a specific question, say i wanted a bunch of landing gear indicators, i could use the standard xplane datarefs for the gear position but could i just use these: ixeg/733/misc/gear_release_right_act ixeg/733/misc/gear_release_left_act ixeg/733/misc/gear_release_nose_act I want to have my indicators work when the actual ones on the MIP turn on Quote
Nils Posted August 7, 2016 Report Posted August 7, 2016 30 minutes ago, Jozer12 said: Okay cool, so a specific question, say i wanted a bunch of landing gear indicators, i could use the standard xplane datarefs for the gear position but could i just use these: ixeg/733/misc/gear_release_right_act ixeg/733/misc/gear_release_left_act ixeg/733/misc/gear_release_nose_act I want to have my indicators work when the actual ones on the MIP turn on Please re-read my post above, "_act" means the dataref is used for input. The one's you wish to use for the gear down annunciators are: ixeg/733/gear/gear_left_green_ann ixeg/733/gear/gear_left_red_ann ixeg/733/gear/gear_nose_green_ann ixeg/733/gear/gear_nose_red_ann ixeg/733/gear/gear_right_green_ann ixeg/733/gear/gear_right_red_ann 1 Quote
Jozer12 Posted August 7, 2016 Author Report Posted August 7, 2016 Ahh okay i didnt see that in the interface guide, is there a full list of datarefs somewhere? Quote
TheFriedchicken Posted August 7, 2016 Report Posted August 7, 2016 3 hours ago, Nils said: The master caution dataref was miscategorized under bleedair datarefs so I appreciate it was hard to find: ixeg/733/bleedair/caution_master_ann Master fire warning dataref is ixeg/733/firewarning/fire_warning_ann We have a lot of output datarefs really - any needle you see move mechanically in the cockpit is driven by a dataref. The same goes for all 'bulb' annuciators. If there's anything you are still missing, I'd like to suggest that interested cockpit builders cooperate on a wish list of things they would like datarefs for and we will see if it can be accomodated in future patches. Thank you Quote
birdy.dma Posted August 7, 2016 Report Posted August 7, 2016 (edited) Hi All, Datareftool could be useful: http://forums.x-plane.org/index.php?/forums/topic/82960-datarefeditor-source-code-and-some-new-features-i-would-like/&page=8 Claude. Edited August 7, 2016 by birdy.dma 1 Quote
jeffrey8608 Posted January 24, 2018 Report Posted January 24, 2018 Hi All, What is the way to assign outputs? is it possible with Arduino? for example with mobiflight? Regards Jeffrey Quote
frumpy Posted January 24, 2018 Report Posted January 24, 2018 2 hours ago, jeffrey8608 said: What is the way to assign outputs? is it possible with Arduino? for example with mobiflight? There are a few ways to do so, e.g. ARDsim is good & for free, an older one would be Teensy with the plugin. I'm using Air Manager, good support by a very friendly team, ongoing development, fits P3D too and best of all - you can develop your own instruments with it. Quote
jeffrey8608 Posted January 24, 2018 Report Posted January 24, 2018 Hi Frumpy, thanks for your reply!:) is it possible with ARDsim to make LEDS working (outputs) Regards Quote
jeffrey8608 Posted January 24, 2018 Report Posted January 24, 2018 Can you give me an example how to do for example a LED with ArdsimX, how the script will look! Regards Quote
frumpy Posted January 24, 2018 Report Posted January 24, 2018 I did it a long time ago, but now the interface has changed. It's more like plug&play now, while the code is harder to read, it can be all automated by the configurator: http://simvim.com/ardsimx/config.html In Air Manager the code for the gear-down-LED would look like this: -- LEDs // Gear gear_led = hw_led_add("ARDUINO_MEGA2560_A_D10", 0) -- define the pin which has the LED function gear_down_xp(position) -- name of function that controls the LED print(position) -- just for debugging if position[1] == 1 then -- this is FLOAT hw_led_set(gear_led, 1) -- turn LED on else hw_led_set(gear_led, 0) -- gear not out, turn LED off end end xpl_dataref_subscribe( "sim/flightmodel2/gear/deploy_ratio" , "FLOAT[10]" , gear_down_xp) Quote
jeffrey8608 Posted January 24, 2018 Report Posted January 24, 2018 Thanks Frumpy, I'll give it a try! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.