General Aviation

This archive only contains textures for the Carenado 172II V2 aircraft. In order for it to work, you need to own this specific aircraft. Since these are only textures, no further support is necessary, just follow the instructions below.
Installation
*** I have included a .obj file that Dan Klaue provided to fix a small problem causing wing registrations to display incorrectly. The filename is TransparentStickers.obj. You must copy this file to the aircraft's main objects folder of the Carenado C172II v2 main folder. You will be asked if you want to replace the existing file, say yes. Make a backup of the original first. This file will enable the under-wing registration of the aircraft.
then...
Open the zip file and move the whole folder I-CCAP to X-Plane 10 (where you installed X-Plane)--->Aircraft-->Carenado Cessna 172 v2 (where you installed the Carenado package)--->liveries. That's it!

38 downloads

0 comments

Updated June 15, 2013

Normals for Mitsubishi MU-2b-60 (64 bit version)

Normals for Mitsubishi MU-2b-60 (64 bit version) by Leen de Jager
Recently a new version/update of the Mitsubishi MU-2B-60 has been released by X-Aviation.
This version is for XP10 64 bit only.
Due to various changes, the normals-set I previously published cannot be used for this version.
Herewith I present you a new normals-set for the MU-2b-60.
How to install:
Download MU-2B-60_normals.zip and unzip it to a temp folder.
Read the enclosed PDF carefully.
Enjoy
Leen de jager
http://www.flybike-paints.nl

122 downloads

5 comments

Updated June 12, 2013

Cessna 172N Skyhawk II G-BEUX

This archive only contains textures for the Carenado 172II V2 aircraft. In order for it to work, you need to own this specific aircraft. Since these are only textures, no further support is necessary, just follow the instructions below. If for some reason you don't like these textures, just delete the folder G-BEUX.
Installation
*** IMPORTANT***
I have included a .obj file that Dan Klaue provided to fix a small problem causing wing registrations to display incorrectly. The filename is TransparentStickers.obj. You must copy this file to the aircraft's main objects folder of the Carenado C172II v2 main folder. You will be asked if you want to replace the existing file, say yes. Make a backup of the original first.
then...
Open the zip file and move the whole folder G-BEUX to X-Plane 10 (where you installed X-Plane)--->Aircraft-->Carenado Cessna 172 v2 (where you installed the Carenado package)--->liveries. That's it!
File information
The textures herein are made from the Carenado blanks. I have made every attempt to faithfully reproduce G-BEUX to the best of my abilities. Limitations in the blank paint kit make it impossible to mirror correctly some of the details on the right fuselage, as only the left fuse is included.

40 downloads

0 comments

Updated June 12, 2013

Cessna 172N Skyhawk II D-ECIK

This archive only contains textures for the Carenado 172II V2 aircraft. In order for it to work, you need to own this specific aircraft. Since these are only textures, no further support is necessary, just follow the instructions below.
File information
The textures herein are made from the Carenado blanks. I have made every attempt to faithfully reproduce D-ECIK to the best of my abilities. Limitations in the blank paint kit make it impossible to mirror correctly the right fuselage, as only the left fuse is included. This particular aircraft didn't have any problems other than the size of registration and underwing lettering that cannot be placed there.

32 downloads

0 comments

Updated June 12, 2013

Cessna 172N Skyhawk II Greek Airforce

This archive only contains textures for the Carenado 172II V2 aircraft. In order for it to work, you need to own this specific aircraft. Since these are only textures, no further support is necessary, just follow the instructions below. If for some reason you don't like these textures, just delete the folder 69-7200.
Installation
Open the zip file and move the whole folder 69-7200 to X-Plane 10 (where you installed X-Plane)--->Aircraft-->Carenado Cessna 172 v2 (where you installed the Carenado package)--->liveries. That's it!
File information
The textures herein are made from the Carenado blanks. I have made every attempt to faithfully reproduce 69-7200 to the best of my abilities. Limitations in the blank paint kit make it impossible to mirror correctly the right fuselage, as only the left fuse is included. This means certain omissions or inaccuracies were necessary, such as the Greek lettering on the right door is reversed.

24 downloads

Carenado
Cessna 172N
(and 1 more)
Tagged with:

0 comments

Updated June 10, 2013

Cessna 172N Skyhawk II

This archive only contains textures for the Carenado 172II V2 aircraft. In order for it to work, you need to own this
specific aircraft. Since these are only textures, no further support is necessary or given.
Installation
Open the zip file and move the whole folder N1971F to X-Plane 10 (where you installed X-Plane)--->Aircraft---
>Carenado Cessna 172 v2 (where you installed the Carenado package)--->liveries. That's it!
ile information
The textures herein are made from the Carenado blanks. I have made every attempt to faithfully reproduce N1971F to
the best of my abilities. Limitations in the blank paint kit make it impossible to mirror correctly the right
fuselage, as only the left fuse is included. This means certain ommisions were necessary, such as the Skyhawk logo on
the fuselage. I have placed it on the lower tail section instead.

39 downloads

0 comments

Updated June 7, 2013

Morane Saulnier MS 893A Rallye - French Marine

Repaint and visual upgrade for the Morane Saulnier MS 893A Rallye .
This fine freeware ( XP10 version) ) model is available at the XPFR website.
How to implement this French Marine livery:
First make sure you have downloaded and installed the original plane.
If you did you have a folder named MS893A_Rallye_v10 in the General Aviation folder.
Unzip this skin-download Rallye Marine.zip into a temp folder.
Now you`ll find a folder named MS893A_Rallye_v10 (likewise the one you already have)
Just place the folder MS893A_Rallye_v10 into the General Aviation folder overwriting the existing folder/files.
Thats all , you`re ready now.
What happened:
A:
A liveries folder has been created with the Rallye Marine livery in it.
If you already had a liveries folder the Rallye Marine has just been added.
B:
Normalmapping has been added to the default model and other liveries .
Enjoy
Leen "Flybike" de Jager
http://www.flybike-paints.nl

25 downloads

Updated May 31, 2013

Piper Tomahawk Breitling

This is a livery-paint for the Piper Tomahawk ( model for X-Plane made by AWALL86.) X-Plane 9 >>
Download the original model by AWALL86 here :http://forums.x-plane.org/index.php? app=downloads&showfile=11697
I deeply fell in love with this lovely bird ,
Painting it has its limitations , nevertheless this was really a challenge , doing some almost impossible paint-things.
This skin depicts the original within the limitations of this model as far as I was able to do.
This set includes normalfiles with speculars for plane , interior and pilot.
It also includes a customised walnut-panel ( for the 3D cockpit-panel only).
Doing research for this project , I met Charlotte Forrestier , the lovely Swiss lady-pilot.
How tow make a nice looking woman from an ugly male pilot ?
Never ever expected to do that kind of job
Well ..... please meet Charlotte !!!
If you do not already have this model, begin downloading and installing it.
Building-in this livery:
Unzip this upload to a temp. folder.
Copy the folder named Piper Tomahawk Breitling from this download into the LIVERIES-folder of
the airplane..
Copy the files named obj3.obj and obj3_NML.png into the main OBJECTS-folder.
Placing these two files here will have NO influence on the existing liveries.
They will only enhance the beauty of Charlotte Forrestier , our female pilot for the Breitling
Tomahawk.
Have fun
Leen "Flybike" de Jager
http://www.flybike-paints.nl

14 downloads

2 comments

Updated May 31, 2013

"Skyhawk Livery" C- GCAG Cessna 172

This is a high resolution (4096 = X-Plane 10 only) livery for the default Cessna 172.
(*!) ATTENTION !!
To benefit the effect of the normal-files its vital to download and install my SAR livery for this bird FIRST ( following the instructions carefully)
Then, just place this Skyhawk C-GCAG folder the liveries folder.
Have fun
Leen "Flybike"de Jager
http://www.flybike-paints.nl

59 downloads

Updated May 31, 2013

F-GNEE - Default X-Plane 10 King C90

By audiotracker

A new livery for the default C90 in the general aviation folder

22 downloads

0 comments

Updated February 17, 2013

Skyhawk 9M-AVR for Cessna 172SP

By cooleroonimike

[REQUESTED]
An airplane with a story.
Requests and questions are welcome

32 downloads

4 comments

Updated February 7, 2013

Piper PA-11 Cub Special 'Copper Patina'

By redpiper

Hi there,
My first upload to X-Pilot so I hope you like it. I made this livery for the amazing Piper Pa-11 Cub Special located here at X-Pilot in the files section. WORKS WITH BOTH V9 and 10. It's loosely based on a plane I saw on airliners.net. Anyway, have fun and happy flying.
Installation: Simply unzip the folder and place the entire unzipped folder into your Piper PA-11 Cub Special "liveries" folder.

65 downloads

Updated January 30, 2013

Polish Border Guard livery for PZL M20 "Mewa" (Seneca)

Polish Border Guard livery for PZL M20 "Mewa" ( Piper Seneca manufactured in Poland by WSK PZL Mielec in a limited series from the 1980s. )
A repaint for the Seneca II model by Carenado. ( XP9 and XP10 )
This is a repaint representing a "Mewa" in a Polish Border Guard livery , as far as possible within the restrictions of the texturemapping wich comes with this Carenado plane , wich isn`t that painter friendly.
Nevertheless a gorgeous plane to fly and paint.
Unzip PZL M20 Mewa.zip into a temp. folder and read PZL M20 Mewa readme.pdf
Enjoy
Leen de Jager
http://www.flybike-paints.nl

25 downloads

0 comments

Updated January 18, 2013

JGX Designs Cessna Corvalis Normal Maps

This is a normal_set for the excellent Cessna Corvalis TT-model (aka the Columbia 400).
Model made by JGX-Designs , available at X-Aviation.
Can be used in XP 9 and 10 !!
Some days ago I got the Corvalis as kinda birthday-present ( be assured ,it was strictly legal ) and I was very pleased having this bird in my X-Plane collection , I really love it.
Its very unlikely I`ll find my way in the extremely sophisticated instruments/panel of this plane.
Its not to blame the plane , nor its great manual.
Its just me , I am just a painter, I am not a pilot.
Being a painter , I was quiet disapponted to see this plane having about fourty excellent default-liveries.
Adding another nice one would be , bringing water to the oceans.
Nevertheless I could not withstand the temptation of adding something I was missing.
Some more gloss and adding normalmapping to the model enhanches its appearance in a great way.
Thats all I did.
How to install:
Just place the files from this upload in the Corvalis main Objects folder.
Please make a backup from the C400_2.obj file in the main Objects folder first.
Thanks to JGX-Desings for giving me permission to publish the edited OBJ file.
Please enjoy.
Leen "Flybike" de Jager
http://www.flybike-paints.nl

40 downloads

2 comments

Updated November 22, 2012

Cessna 172 SAR

OH-CAM Palolento SAR
This is a livery-paint + * for the default Cessna 172 in X-Plane 9 and X-Plane 10
Paint made by Leen "Flybike" de Jager.
* Paintwork for this livery includes added normalmapping and higher-res textures.
Livery dedicated panel and cockpit colors.
By adding normals and increasing the texture-resolution this default Cessna 172 is "as good as new".
This paint depicts (more or less,within the limitations of the model and its painter) OH-CAM
Installation:
Attention this is not just a livery , and cannot be implemented as such.
Uzip this download to a temp. folder and read the enclosed readme PDF carefully!!!.
Enjoy
Leen "Flybike" de Jager
http://www.flybike-paints.nl

69 downloads

Submitted October 24, 2012

Carenado F33 Bonanza Livery

By Zach Decou

Hello Guys and Gals
Here is a fictional livery for the Carenado F33A Bonanza.
It has a vintage-ish vibe of burnt orange and dark grey.
Tail number is included on the panel and fuselage. I can upload the .psd files on request if someone wants to change the tail number.
Hope you like it!

43 downloads

Carenado
F33A
(and 4 more)
Tagged with:
- Carenado
- F33A
- Bonanza
- Livery
- Orange
- Grey

0 comments

Submitted October 16, 2012

N9012F for Carenado C208

By ryancz

A part fictional paint I made for the Caravan.
Enjoy!

92 downloads

4 comments

Updated August 26, 2012

Fictional livery for Fokker F27-600

By Gquann

This is a fictional livery I made for the Fokker F27-600 freeware aircraft which is available on X-Plane.org. This is my first ever attempt at making anything for X-Plane so please let me know what you think.

19 downloads

Fokker
F27-600
(and 1 more)
Tagged with:

2 comments

Updated August 23, 2012

Sequoia Falco N767CN

This is a repaint of the owners/builders father and son team of Charlie and Bill Nutt. The aircraft is Sequoia Falco N767CN. I have changed the cockpit colors and added some details to the cockpit. The panel is stiil the original Falco panel but I have added some detail to the panel. Also, the canopy does not match to the real one. Check out the original here http://www.seqair.co...icle/index.html
Larry

23 downloads

Falco repaints

0 comments

Updated August 13, 2012

Colani-cargo livery for the MU-2 by X-Scenery

Colani-cargo livery by Leen "Flybike" de Jager, for the MU-2, model by X-Scenery
It depicts the Colani cargo-livery for this Mitsubishi MU2 twin-turbo-prop.
Due to the limitations of the model you`ll experience the "cargo-feeling" just on the outside.
I added normal-files (with specular-layers) wich contain custom-made effects (specular regulated gloss).
and special made LIT and NML- files, reveiling where the tail-logo-light comes from.
Please read the enclosed "Colani README FIRST.PDF" carefully.
MIND:
This MU2 model was designed for XP9 and not yet 100% performing in XP10.
The model however can be flown in XP10 and this livery is compatible.
Screenshots shown were made in XP10.
Questions, or need help, please mail me.
Enjoy,
Leen de Jager
http://www.flybike-paints.nl

42 downloads

0 comments

Updated August 10, 2012

Mitsubishi MU-2 N316PR

This is a repaint by Leen "Flybike" de Jager, made for the superb X-Scenery Mitsubishi MU-2.
It represents the N316PR wich crashed tragically on the 25th of June 2006.
I added normal-files (with specular-layers) which contain custom-made effects (specular regulated gloss).
These custom normals are part of the livery allthough they can be used for other liveries as well. Please read the enclosed N316PR_Readme PDF carefully. Use a text editor e.g. Wordpad for editing the OBJ files.
Questions, or need help, please mail me.
Enjoy,
Leen de Jager

83 downloads

0 comments

Updated August 9, 2012

Falco Deluxe

This is the original Falco to which I have added my details found in my other repaints, including landing gear, landing gear detail, cockpit detail, and fuselage detail.

50 downloads

Falco Repaint

0 comments

Updated August 6, 2012

Ferrari Falco

This is a fun repaint of the Falco . They call it the Ferrari of the Sky so I repainted it in Ferrari Red, added on Ferrari bling, and a carbon fiber panel.
Have fun!,
Larry

8 downloads

Falco repaint

0 comments

Updated August 5, 2012

Sequoia Falco Stellar Jay