Search the Community
Showing results for tags 'Saitek'.
Found 8 results
-
Hi everyone! So far, with @Pils's CL650_xsaitekpanels.ini file, the multipanel was displaying 0s only, instead of the ALT, VSPEED, HDG, COURSE, etc. I've been digging into it lately, to try and make those displays work, and I managed to find the datarefs. I now got the HDG showing properly, by using abus/CL650/ARINC429/FDCU-1/words/FCC/0/HDG_SEL. I have also found the following datarefs for ALT and IAS, but the values are in meters for the ALT, and in meters/second for the IAS: abus/CL650/ARINC429/FDCU-1/words/FCC/0/ALT_SEL abus/CL650/ARINC429/L-PFD-1/words/FCC/0/IAS_SEL For the VS value, I've only found datarefs that have values that I cannot decipher, but certainly don't look like 1000, 2000, 2400, etc; the values are not in feet per minute. I certainly would appreciate someone pointing me in the right direction for finding those datarefs. Thanks in advance!
-
Hi all. Apologies if this has been raised before however: I have 2 x Saitek TQ's. I have mapped the throttle and CL to the appropriate axes. All good so far. The question now is this: I want to map beta (reverse) for engines 1 and 2 to the corresponding buttons below the throttle axes and the fuel cutoff to the buttons below the CL. The Saitek has a detent to pull the lever into which activates a button function. Any help appreciated. (and I am not that savvy with FWL scripts )
-
I upgraded my Macbook Pro to MacOS Sierra (10.12.4) a few days ago. My X-Plane 11 application fails to recognize my Saitek Cyborg 3D Gold joystick. Checking Mac hardware, it does recognize it under the USB Device Tree: CYBORG 3D USB: Product ID: 0x0006 Vendor ID: 0x06a3 (Saitek PLC) Version: 0.01 Speed: Up to 1.5 Mb/sec Manufacturer: SAITEK Location ID: 0x14200000 / 16 Current Available (mA): 500 Current Required (mA): 100 Extra Operating Current (mA): 0 Any help appreciated!!! Thanks. -
Hi guys, has someone figured out a way to make the buttons of the ixeg work with the saitek switch panel?
-
Hi, I am new to this and also to Xplane plugin. I download the xsaitekpanels , dataref and Python plugin but lost on how to program the xsaitekpanels.ini. I have the radio and the Multipanel I end up to download the file from this contribution but the knob of altitude is stuck and I cannot turn it in the VC and neither in the Saitek MCP. Also the HDG CRS VS I can turn in the VC but not in the Multipanel. the trim wheel is not working For the radio the only one that it's not working properly is the QNH not synch by 1 units Can someone point me on how to program or tell me how to solve this glitch Thank you
-
Hello together, I was wondering why my Saitek radio panels work perfectly for NAV 1 but not for NAV 2. If I change the NAV 2 frequency on my Saitek radio panel, the frequency does not changed in the IXEG NAV 2 panel. So I took a closer look on the datarefs and what is happening in the background and found a difference on updating values for NAV 1 and 2. I set NAV 1 & NAV 2 in the IXEG Cockpit to frequency 111.50 On the datarefs I can see following situation. sim/cockpit/radios/nav1_freq_hz = 11150 ixeg/733/radios/radios_nav1_00001 = 11150. ixeg/733/radios/radios_nav1_00010 = 1115. ixeg/733/radios/radios_nav1_00100 = 111. ixeg/733/radios/radios_nav1_01000 = 11. Then I changed the dataref sim/cockpit/radios/nav1_freq_hz to 11365. Everything is fine and the frequency in the NAV 1 panel of the IXEG gets updated to 113.65 The datarefs show exactly that change: sim/cockpit/radios/nav1_freq_hz = 11365 ixeg/733/radios/radios_nav1_00001 = 11365. ixeg/733/radios/radios_nav1_00010 = 1136. ixeg/733/radios/radios_nav1_00100 = 113. ixeg/733/radios/radios_nav1_01000 = 11. Then I did the same For NAV 2 (sim/cockpit/radios/nav2_freq_hz). However, the NAV 2 panel of the IXEG does not change. It stays at 111.50 If you take a closer look on the datarefs, you can see that the IXEG internals were not updated automatically: sim/cockpit/radios/nav2_freq_hz = 11365 ixeg/733/radios/radios_nav2_00001 = 11150. ixeg/733/radios/radios_nav2_00010 = 1115. ixeg/733/radios/radios_nav2_00100 = 111. For me, it looks like there is a different logic behind NAV 1 and NAV 2 that causes the problem with the saitek panels. Maybe I am totally wrong but maybe you can have a look at it. It is not a priority for sure. However, it would be nice if you could add this to your list of things that need some attention :-) Many thanks in advance, Sebastian -
Anyone from Malaysia or know where can I buy the Saitek Pro Bundle in Malaysia? Cheers, Eric
-
Congratulations with the wonderful plane. The paint job, detail, flight characteristics are AWESOME Unfortunately there seem to be some incompatibility problems with users who uses SAITEK Panels. The SAITEK PRO FLIGHT RADIO PANEL suppose to control Com1, Com2, Nav1, Nav2, ADF, DME, XPDR. The displays show the correct frequencies but none of the frequencies can be changed using the Saitek Panel. (when turning the frequency knobs the frequency briefly changes but jumps back to it's previous setting) Notes: I have a slew of payware and freeware aircraft and besides the "Mentor", this is the only plane that doesn't want to "listen" to the Saitek frequency changes The SAITEK PRO FLIGHT MULTI PANEL suppose to control most of the autopilot functions. Besides Heading, the other functions do not work or work erratically. Thank you for looking in to this. Marc
.thumb.jpg.4f65b9da63688cb36ecd00649cedfd38.jpg)
