Blizzard

OK! Should I delete the old installation in the windows program folder? Tanks again! Rolf

Hi Cameron, thanks for your fast reply! Ok! But the installation of SkyMaxxPro und RWC is assigned to X-Plane 11 only. Are there a possibillty to assign the new versions of SkyMaxxPro and RWC to X-Plane 10 on the same PC? Thanks again! Rolf

Hi all, I ordered the new version of SkyMaxxPro 4.6, because I missed it to update my previous version in time. I installed v4.6 in the assignment to X-Plane 11. The older version of SkyMaxxPro I installed in the assignment to X-Plane 10 a long time before. Now, there are two SkyMaxxPro software files in my windows programm folder. Will there be possibly conflicts caused by double installation? I would like to use the new version SkyMaxxPro with X-Plane 10 and 11 on the same PC. Should I deinstall the older SkyMaxxPro version and how can I regulate the assignment to X-Plane 10 and 11 after that? The same question and constellation concerns RWC, because I've to change from RWC 1.0 to 1.1. It would be nice to help me. Thanks Rolf

OK, It's much better now!! Sometimes if I'm flying into clouds there are diffuse fog like structures, then synchronization not always perfect, but otherwise it's realy impressive synchron. All PC's have access to the internet. Should I switch RWC of the server to "always" mode, too? Rolf

Hello, weather with RWC on three of my six muliple views(six machines via network) not realy synchronized. On my server PC(Chinook-PC) and two of my client PC's I installed RWC in April and I can see two Metar files, namely METEAR.rwx and MAXX_METEAR.rwx(see in the attachment). Chinook-PC METAR.rwx.pdf On my other three PC's I installed RWC Friday 08 July, 2016 with my second license, using a fixed RWC- Installer by Cameron. On this three machines I've only one METAR.rwx file and not the MAXX_METEAR.rwx file (see the second attechment). Orkan-PC METEAR.rwx.pdf Further I remarked that the file size of the METAR.rwx files are different on each PC. How can I ensure, that I've identical files or conditiones to get the best sychronization on all my six views? Rolf

The problem was solved very fast! Thank you Cameron!! A very nice product - respect! Rolf

OK! Thanks! I did it this way, because there was a note, that it would be faster by forum. Also I've two tickets in relation to other questions and I didn't get a reply via mail. But, I'll try it again. Rolf

Hello, I ordered and payed via PaPal a second License (RWC) this day for my multiple view setup with six machines, but I got the message "All license slots used." Rolf

Hi Cameron, I like SkyMaxxPro, it's awesame and there are no problems with synchronization with clouds on my client PC's. I'm sorry but I've no synchronization in relation to clouds with RWC on my client PC's, settings all the same. Rolf

OK! Thank you! I set the RWC to automatic(when to use real world METAR data for clouds) and how should I set the weather adjustment in X-Plane (Client PC's)?. regards Rolf

I've updated SkyMaxxPro to 3.1.1 and RWC installed on my server PC. My setup is a multiple view configuration with 6 PC's and 6 scenery monitors. I'm a little bit confused. I installed RWC on a second PC,too, but is it really correct? - Because I noticed clouds are not synchronized with the server. The RWC is set to automatic and how should I set the weather adjustment in X-Plane (Client PC's)?. May be it is sufficient to install RWC on the server only and synchronization will work by network, isn't it?

Hi John, I have done it that way as you have suggested. The result is really very good. It seems, that there is a high level of sychronization, maybe almost 100%, including the near fine mist-like clouds, too. However, I still would like to state it not quite in conclusion so. I'll test and chec it far under different conditions and keep you informed. Great work - awesome software. Rolf

Hi John, are there any news in this case? I don't want to put pressure on you, but it's an awesome plugin and I would like to enjoy it altogether in my homecockpit. Rolf

Hi John, thank you in advance! Rolf

Hi, in the attachment you can see different pictures in relation to the problem with fine mist-like clouds sychronization via network with multiple monitors. Rolf IMG_3026.zip IMG_3027.zip IMG_3028.zip IMG_3029.zip IMG_3025.zip

Hi, it's a dream!! Congratulation!! I installed the update 1.3 with no problem on my six scenery machines and tested it on all monitors in relation of synchronization. I think it's realy very good performed now, but there are not 100% sychronization if the airplane passes through fine mist-like limited clouds, than you can watch for e.g. a clearly area on the 45°left monitor while on the left center monitor(cpt.) the mist-like cloud are filling e.g. the left lower part of this center monitor. X-Plane original weather is in relation to this mist-like clouds realy to 100% perfect. And second I watched changing the weather (I'm dowmloading metar.rwx weather about all 10') partly very suddenly, that means there was a situation with impressive clouds, they disappered very fast and new, less clouds were performed - that was very disturbing. Please don't misunderstand me, I like SkyMaxx very much and it's a excellent product, but I think it should be even better, means a top, top pruduct. Rolf

Hi, I'll update SkyMaxx Pro1.2 the first time. Do I have to uninstall any files of the old version or do I have to start the setup windows.exe of SkyMaxxPro1.3 only? Sorry for this question. Rolf

Hi, that's very great!! I'm looking forward, especially the synchonizing for multiple displays via network. I'll try it this day Rolf

OK! Wilco! regards Rolf

Hi, I purchased SkyMaxxPro 1.1 12/15/2013 and installed it on three of my 6 machines with no problems. This day I updated to SkyMaxxPro 1.2 on each of this three machines with no problems. All is working fine. I'm looking foreward to update 1.3 in order to enjoy full synchonized SkyMaxxPro on all my 6 PC's and 180° view. Therefore I ordered a second license of SkyMaxxPro 1.2(for the rest 3 of my machines) this day. I downloaded the software and installed it on the first PC, but I couldn't activate it, because I would have supposed it activated on three machines. But this is wrong, because I purchased a new license today with the possibility to activate it three times. I purchased it via my consisting account. Please could you help me?! regards and Merry Chrismas Rolf

Hi Frank and John, thank you very much for your very fast reply! That's sounds realy very good. I'm looking foreward to the SkyMaxx Pro 1.3 release. Congratulation to your phantastic software. Yes, my multi monitor setup improved the simulator flight feeling enormously. regards Rolf

Hi, I use X-Plane 10.25rc1 with a multi monitor setup via network. That means, I have 6 monitors associated with 6 PC's to create a semicircle of 180°, each monitor with a view cutout of 30°. Some days before I purchased SkyMaxx Pro and installed it on three of my machines. I started X-Plane 10.25 rc1 on each machine but there is no synchronized clouds etc. with Skymaxx Pro in relation to the server PC.If I use the original X-Plane weather, clouds etc. it works fully synchronized on all of my machines.My setting of SkyMaxx Pro I did all identical on each PC.I know some problems with different X-Plane plugin software in relation to network synchronizing, but it is possible to programm it. It would be very, very nice to solve this problem with synchronizing via network, because I like Skymaxx Pro very much, but it doesn't make so much fun in my home cockpit and finally Iwould like to purchase a second copy for the rest of my machines. Best regards Rolf

Hi, I use X-Plane 10.25rc1 with a multi monitor setup via network. That means, I have 6 monitors associated with 6 PC's to create a semicircle of 180°, each monitor with a view cutout of 30°. My question: If I would install SkyMaxx Pro, which I admire very much, on my server PC, would it synchonize the other Pc's, with the presentation in X-Plane or do I have to install a new version of SkyMaxx on each PC? regards Rolf

Hello all, I'm a newbie in this forum, but not with x-plane and flight simulation in general. I just started with online flight simulation in cooperation with a copilot mostly. We remarked, that it would be very helpfully to use two yosticks (each one at the moment for the pilot in command). I know, that there are interactions in X-plane if I try to use two yosticks at the moment, but it would be logical and oK to use one yoystick at the moment and switch off the other one. Are there a possibillity to create a plugin for that pupose - I hope so. regards Rolf