Jump to content

J_Will

Members
  • Posts

    29
  • Joined

  • Last visited

  • Days Won

    2

J_Will last won the day on September 17 2012

J_Will had the most liked content!

J_Will's Achievements

Newbie

Newbie (1/14)

1

Reputation

  1. Ah, everyones favorite little copyright infringing, IP stealing, problem child is back under another pseudonym. This should be good for a few laughs until Cameron drops the ban hammer down again.
  2. These particular doors of yours are just about perfect for giving the illusion of actual 3-D geometry. I knew that there was something different in the way you prepared the doors for this file. The bump mapping makes all the difference. It's a bit confusing though. I know how to create bump maps as well as normal maps for my 3D projects created in Cinema 4D, however I don't really get how they are made to work in X-plane. I know that X-plane uses a combined map for both the normals and the bump which is different than Cinema 4D which uses separate files for each. Regards, Jeremy P.S. My statement before about publishing paints solely at X-Pilot was really just meant in jest. I have been publishing my work at both websites as well.
  3. It's not that I prefer this bird without the necessary cargo doors for an air transport plane, it's that I'm not fond of how it looks in the sim. No matter how much detail one lavishes on a 2-D representation of the doors, it's still just a flat image painted onto the side of the plane. The hinges are the main point of contention for me; also the slight overhang on some aircraft. The doors themselves wouldn't have to actually be cut out of the model and made so that they can open. Just a couple of 3-D hinges on the front part and the larger cargo door hinges at the back would make for a more accurate looking representation of this or any variant with this type of door. What would really be fantastic in the future, is if the developers added an actual cargo plane variant to the mix, complete with a fully modeled "barn-door type" door at the back, with the passenger seats removed, and even a load of boxes with tie downs in the back. It would be some work, but well worth the effort. The role of the DC3 as a cargo carrier is one of it's most important. It would be truly awesome to have a cargo variant added to this already amazing virtual DC3. It would be perfect for my FS Economy flights, as I've been using this aircraft pretty much exclusively in that role ever since I got it. Thanks for the compliments Leen. It's always good to chat with you. I've been in the midst of moving up until just recently so I apologize for not returning your e-mail. To answer some of the points you made in your message, I enjoy nothing more than to get under the skin of people such as those megalomaniacal curmudgeons who moderate that ORGanization. Now that X-aviation is allowing us to host files here I think we will finally see the power of that ORGanization within the X-Plane community begin to wane. I would even go so far as to suggest a sort of quiet revolution of sorts, whereby those of us who are able to develop work of professional quality stage a revolt against that other place and only make our files available here at X-pilot. "Vive la Revolution" Cheers Jeremy
  4. File Name: RAF Transport Command LES DC-3 File Submitter: J_Will File Submitted: 10 Aug 2012 File Category: Vintage X-Plane Version(s): X-Plane 9 & 10 Livery For: Click Here For Aircraft This well maintained DC3 wears the elegant and noble colors of the RAF Transport Command. Originally formed in March of 1943 (Wikipedia) as a unit charged primarily with ferrying aircraft from the factories to the forward operations airbases of World War 2, then later taking over the harrowing task of dropping paratroopers into the fight, this unit was an integral part of the Allied forces war effort. Following WW2, the Transport Command expanded greatly and took part in a number of famous operations such as the Berlin Airlift, utilizing amongst other types, many DC3's designated as Dakotas in Great Britain and wearing these colors. The RAF Transport Command continued to fly with distinction in many historic operations throughout the world, flying millions of miles and visiting every continent save for Antarctica. In 1967 the unit was reduced and renamed the Air Support Command, which reflected a change in task to a more active combat role instead of the transportation of goods and humanitarian aid. The RAF are renowned for taking great pride in their aircraft, so this DC3 is clean and well maintained. The cockpit is still indicative of a hard working DC3 of course. I've included a conversion for the prop disks to show yellow tips on the spinning props. Instruction are included as a PDF. The livery "RAF Transport Command" folder goes into the usual liveries location within your LES DC3 aircraft folder. I hope you enjoy flying in the colors of the RAF Transport Command. Thanks! Click here to download this file
  5. Version 1.1

    93 downloads

    This well maintained DC3 wears the elegant and noble colors of the RAF Transport Command. Originally formed in March of 1943 (Wikipedia) as a unit charged primarily with ferrying aircraft from the factories to the forward operations airbases of World War 2, then later taking over the harrowing task of dropping paratroopers into the fight, this unit was an integral part of the Allied forces war effort. Following WW2, the Transport Command expanded greatly and took part in a number of famous operations such as the Berlin Airlift, utilizing amongst other types, many DC3's designated as Dakotas in Great Britain and wearing these colors. The RAF Transport Command continued to fly with distinction in many historic operations throughout the world, flying millions of miles and visiting every continent save for Antarctica. In 1967 the unit was reduced and renamed the Air Support Command, which reflected a change in task to a more active combat role instead of the transportation of goods and humanitarian aid. The RAF are renowned for taking great pride in their aircraft, so this DC3 is clean and well maintained. The cockpit is still indicative of a hard working DC3 of course. I've included a conversion for the prop disks to show yellow tips on the spinning props. Instruction are included as a PDF. The livery "RAF Transport Command" folder goes into the usual liveries location within your LES DC3 aircraft folder. I hope you enjoy flying in the colors of the RAF Transport Command. Thanks!
  6. I was just chatting with another user about if there was a way to do really thick smoke in X-plane, which as far as I know can't really be done. But it reminded me that one of the small things I was hoping for in an update for the DC3 was some proper smoke from these big old radials, especially at start-up. As it stands now, nothing, not even a wisp, ever emanates from the exhaust pipes. Strangely if I do hit X to turn on X-planes smoke function, some wisps come out from in front of the engines instead. I know X-plane does a really pathetic job of displaying smoke by default. It looked like cotton balls firing out of the engines before I edited the smoke_puff.png file to have at least a modicum of realism for this. It's just a small thing, but it would just add to the immersion of flying this old bird. Thanks again!
  7. I've noticed this also. When the problem occurs, the aircraft will go from nicely straight, level, and trimmed to a wild pitch up. After you disconnect the autopilot in order to right the ship and then try the autopilot again it just flips on and off afterwards. As far as I can tell, once this happens you can't turn the autopilot on again until you reload the aircraft.
  8. I actually fixed that modern "Ding-a-ling" by inserting a blank autopilot_disco.wav into the sounds folder. It's a hack fix, but it works. I'll probably do the same thing for that irritating constant brake skidding sound as well. I swear Austin must have gone around recording sound effects with his old walkman from the 80's for most of the default sounds in X-plane.
  9. Having a bolt-on GPS in the cockpit would be a fantastic update to this awesome DC3! Which GPS unit do you have modeled? I have a nice KLN90B of my own almost finished. I dream of hooking it up to the EADT simulated one, but I'm not a programmer so I have no clue how to do it.
  10. Just a thought. A "Historic" section for aircraft liveries might be cool. Seems to fit the gorgeous LES DC3 better to have that category to place my liveries in. Thanks!
  11. This is a great day for X-Aviation and the X-plane community indeed. Now that X-plane is finally getting some much deserved attention in the flight simulation category, it deserves to have a website run by courteous and professional people to support it like X-Pilot. The megalomaniacs who run that "other" X-plane site can kiss-off. That other place is outmoded, unfriendly, and unprofessional. It has been a hindrance to the growth of X-plane into the mainstream. X-aviation is a great company which offers some of the very best add-ons for X-plane available today as well as having great customer service and support. With the other place, I feel like I have to constantly slog through the forums on everything that I've purchased to see if anything has been updated or fixed. With downloads available on here now, I hope to see a large migration of traffic come over from the other site as well as new comers to X-plane coming here first instead. Austin should change the Laminar site to direct people here instead of that other filthy rotten ORGanization.
  12. Definitely glad to hear it's getting a positive response. Thanks for the kind words on my livery. For my next file I've chosen a much more well known subject, the 1940's Alaska Airlines livery. I'd actually like to do two different versions of this same livery. What I'm working on now is based on the gorgeously restored aircraft which is currently hanging in the Museum of Flight here near where I live in Seattle, Washington. If I get some time I could even go up and take some pictures of it myself. If I only had a giant ladder! I could get pictures of the interior which seem strangely hard to come by, especially in color. Though this plane isn't the original NC91008, which sadly was lost when it struck a mountain in 1954 on a positioning flight in Alaska that claimed the lives of the two crew members, it is a stunning example of the aircraft none the less. Then I'll probably do a version of this same livery, of the actual aircraft designated NC91008 after it was retired from being a C-97 in 1949. This one will be made as a down and dirty Alaska bush work horse. Oil stains, grime, dents, chipped paint...it will be glorious!
  13. Ok the updates are coming fast and furious now. I've figured out the radio tuning problem. It had nothing to do with the deletion of the X-plane temp files. If I turn on the batteries, then I can tune the radios just fine. sheesh
  14. Oh ok. As long as I know that it's supposed to be "broken," it won't bug me that it doesn't work As for the autopilot issue, don't think that it's a problem with only your DC3; I've had this problem intermittently with almost all aircraft in X-plane for quite some time now. What I noticed is that if I delete the temp files in the main X-plane directory that are created when X-plane starts up and then load it the problem disappears, at least for a short while. Irritatingly the last time I tried that solution just yesterday though, the autopilot worked, but then somehow the click spots for the radio tuning knobs didn't work! Arrrrrgg! This flight simulation hobby certainly takes a lot of patience. The next time I loaded X-plane I had radio control as well as the autopilot problem back, which is somewhat less debilitating than not being able to tune the all important Nav radios. My DC3 piloting skills are improving at least, though I still haven't managed to get this old bird down without bumping and ballooning onto the runway yet. I'd have some pretty sick and angry passengers at the end of a flight in real DC3. On another note. I've been doing some painting for this aircraft which I believe has turned out well, but it seems that so far I've only had a paltry number of downloads on the org for my files. Another fantastic painter whom you probably know through the forums, Leen de Jager, has expressed similar sentiments with the disappointingly low number of downloads for his DC3 paints as well. Seeing as how we both do this work in our spare time free of charge and the only payment we wish to see is interest and maybe a few thank-you's here and there, this does prove to be disheartening. I hope this isn't from lack of interest in the .acf itself! That would really be unfortunate, because this is truly one of the best aircraft available for X-plane today. It always seems like it's the modern jet jockeys who get all of the attention in flight simulation. People are going crazy for the upcoming 777 and eventually the 737 Classic projects. Honestly I am too, but for me it's the 737 classic that gets me most excited, for the very reason that it is old and doesn't just fly itself after you've programed the FMC. Which is one of the many reasons I love this DC3. It's such a deceptively simple aircraft. You can be in the air in minutes once you've got the checklist down. But just as I mentioned before, there isn't a computer flying the plane for you, hence no ILS auto-land to keep you from bouncing down the runway with virtual passengers screaming and throwing up in the aisles.
  15. Also, as an addendum, I've tried to interact with the red switch labeled "ac type a-9" which doesn't seem to be an active click spot or moveable selector.
×
×
  • Create New...