birdy.dma

Here: http://fsgrw.freeforums.org/x-plane-10-50b1-t541.html and here: http://forums.x-plane.org/index.php?/forums/topic/104910-inject-weather-fsgrw/ claude.

Hi jatar, If connection is lost (a quirk of internet), quickly pause both sims. Try to reorder you pits (fms, mcp etc), connect and leave the pause. If you are lucky, you will land. If not, it will be a disaster movie.

Hi M4cD, It's a VOR. Set it on NAV1 or 2.

New files available in the first post.

I don't know. We could may be find something in your logs.txt. Post both.

Here is the problem: 2016-08-06 15:49:23.995 ERROR UPDATE FAULT - DR's are not equal I am out of ideas. Check your version of the plane, and of course the smartcopilot file. You must have the exact same file. Smartco read the DataRefs.txt and the Commands.txt (In Ressources / Plugins). They should not be different, but, in case, delete them (back up), and launch the updater. It will recreate them with a fresh copy from Laminar. But, as the Baron is OK,, and nobody modify those files, there will be probably no difference.

Update failed: there is something different between your sims : 1.0.4 vs 1.0.5, X Plane 10.36 vs X Plane 10.45, xjoymap.ini vs no xjoymap.ini, lua script, or something else creating commands or datarefs. Can't find DataRef: this is only a warning in the log file Waiting for a readme included in the .zip, here is a checklist: Before the connection Same state of the plane. fuel, payload, CG, Cold and dark, Turn Around, Ready to fly. After the connection If cold and dark, don't use the carts, APU only. Elevator trim with joystick button only (no mouse). Airbrakes with mouse, joystick button, keyboard (no axis). Guards and gear door are not synchronized. Each pilot have to open/close them. smartco 1.4.3.zip

Thank you. Just send you an email.

Good day Litjan, With the next version can we expect some improvements for the shared cockpit? Claude.

Good idéa.. I can also join a read_me in the .zip. I just need a help, as my English is sometimes unclear. cmbaviator are you with me for o proper translation?

Probably better with FSRGW, and depend of the settings of SMP, as they are probably différents.

Ok Sometimes a click is lost thru the internet. It can happen with any part of the cockpit. In this case, there is a workaround. The P key (pause) is synchronized. Any pilot pause both sims. Then disconnect, reorder the wrong pit, reconnect and leave the pause.

Have you those pictures on both side?

Double check your AIRACs. I am pretty sure they don't match. Also, if your flight plan is exported from EFASS, you must have same AIRAC in EFASS and fmc_data. You must share the very same flight plan in the coroutes folder.

A new one. Better with brakes and rudder when the slave have commands on ground. Better with speed brakes (don't use any axis. Only keyboard, assigned buttons or mouse). Smartco 1.4.2.zip

Sound problem: i got it. The Guards caps are faulty. Again, each pilots have to manipulate them. They are no more synchronized. Smartco.zip

Do you have the same state of the plane before the connection? (cold and dark, ready to fly, fuel and payload set...)

I think it is: Pilot Non Flying.

I had the problem with a friend of mine. The time of his mother board was not right (of course also time of win and x plane). There was a sad flickering of the slave pit.

@WR269 Will correct, but this is not the reason of your problems. (i have also missed a guard cap). @Destinate Check time of your mobos, OSs, and X planes.

Hi Gents, Much better. Commands added: ixeg/733/autopilot/at_disengage (provided with the 1.0.5 hotfix), and:sim/autopilot/autothrottle_toggle . Guards are now synchronized from master to slave. Not perfect, but better than before. Same for the door gear. Spring loaded knobs are working properly. APU knob, the 4 GEN knobs, and the ET knob of the clock. No joy with trims knobs (Pedestal). Smartco 1.0.5.zip

Here some help with IVAO:

About the reverser and fire engine, my reference was the Operation Manual page 506, and about gear, it was just the noise of gear down as it is up. The noise is tied with the gear handle (up or down), not with the gear itself (any wheel up or down).

Tests done in a shared cockpit. We did crazy tests to break the landing gear system (engine shut down, electricity, hydraulics....). At some point it was broken. Lowering the landing gear handle, gear stays up, but we could hear the noise of the landing gear down. Ok, minor bug, but as we found it, I report. Pump to lower the nose wheel, well done, it is OK, then end of the test : crash (not of Gizmo, but of the plane). Second fly : Fire of engine 1 using the stock failure. Bell, bombers, we are safe and return to base. After touch down, reverse. Reverser was working on engine 1. This is not correct.

I was not happy with the Fuel used and FF. Here is a new logic for throttles and FF (and minor tweaks of autopilot). Now, set the same amount of fuel in each tank before the connection. Fuel used, FF and fuel displayed on the first progress page are correct. Smartco IXEG.zip