head_check

Now it's clear Thank You! ============ Do You know, how to activate the weather radar on the co-pilot side?

With gust lock on the pedestal? I will check it, Thank You

Two screenshots: Weather - Rudder - Some bug with COM frequences - It is impossible to call the frequence 124.87 (ATTIS EETN) 124.86 or 124.88 but not the 124.87

You can use Simple-FMS for programming SID's, STAR's and Appr. It have the "synchr" function and will synchronise your LNAV leg with Garmin. Only LNAV, VNAV and speeds can not be transfered to Garmin. I use EFASS on the second PC, it give me FP with SID, STAR and currently (for SAAB) T/C and T/D

Than the model needs the clamps and prop caps as static elements.

Realy it is a bug and I had it too. But sometime. I will check the conditions, where it goes. About winds - the props are rotating on the appron - that is the wind? How much paxes and technickal stuff was killed these props in the history of our "realism is here"? lol

It's not the bug, it's wind ))) Elevator and Rudder are free, imho, without hydraulic running. The Developer can add the appropriate clamps to static elements. And Propeller caps (for prevention of props rotation from the wind) too! It's very important part of static elements was forget. But - it is the safety!!!!

Ok, thank You!

It's clear, but! The (real world) Saab have the first officer. I do not know the CRM rules for European crew and for anouther world, but in Russia the F/O (if the control is by Cap) translate altitude at landing.... I will make this voice for me, that is the habit

In the directory "sound" was found the files with Saab verbal altitude messages. 1000 feet, 500 feet..... howewer is function deactivated it is possible to make it's active?

Thank You, Gantlemans Now I have that wanted With seen from appron I call van with crew (Ground Handling Deluxe Jar), than I open the main door, and put down the stire (with seen from appron) Than I give power to the craft (batteries, external power...etc...----> with seen on overhad from cockpit + Gizmo SAAB-GH (look around) menu) Than I call tanker from Ground Handling (Jar) --- only animation, for developer - to make tanking menu activated after tanker comming Sorry Gantlemans, but it now the standart for X-Plane, NO??? than unlock and open the Cargo door + call the loader from Ground handling Deluxe (Jar) Than I call the Neoplan with Pax'es from Ground Handling Deluxe (Jar) ================= preparations in the cockpit and around craft according check list ================= Than - all Ground Handling (Jar) devices back/hide Cargo Door close and lock, Main door stair (two commands= two buttons) back, main door close (3 commands - 4 commands/buttons with command for attendant seat), Than ---> according chek list ))) Config file for Python (xjoymap-script (.ini file=config) scripts for Python XP Interface): first strike simulate axis for control of both condition levers between min and max positions second command control the prop synchronisation swich (on/off) than - doors at the end - control of volume from communications channels COM1 and COM2).... (on/off) ================================================== [Saab Condition Levers] axis=24 dataref=LES/saab/CL/manip_common(float) drl=0.50 drh=0.90 [SAAB Prop Synchronization] new_command=prop_synch dataref=LES/saab/prop/prop_sync_toggle values = 0, 1 [SAAB Maindoor lock] new_command=maindoor_lock main_command=LES/CMD/door/entry_door_lock [SAAB Maindoor Handle] new_command=maindoor_handle main_command=LES/CMD/door/entry_door_handle [SAAB Maindoor open] new_command=maindoor_open main_command=LES/CMD/door/entry_door [SAAB Attendant Seat] new_command=attendant_seat main_command=LES/CMD/cabin_attendant_seat [SAAB Stair fold] new_command=stair_fold main_command=LES/CMD/stairs/fold [SAAB Stair slide] new_command=stair_slide main_command=LES/CMD/stairs/slide [SAAB Сargodoor handle] new_command=Cargodoor_handle main_command=LES/CMD/door/cargo_door_handle [SAAB Cargodoor open] new_command=Cargodoor_open main_command=LES/CMD/door/cargo_door [Saab Monitor COM1] new_command=monitor_COM1 dataref=LES/saab/ACP/vol_com1_pilot values = 0, 1 [Saab Monitor COM2] new_command=monitor_COM2 dataref=LES/saab/ACP/vol_com2_pilot values = 0, 1

Thank You very much!

Also, it works with 3 commands It is impossible to do this operations parallel, only serial ==================== [SAAB Maindoor lock] new_command=maindoor_lock main_command=LES/CMD/door/entry_door_lock [SAAB Maindoor Handle] new_command=maindoor_handle main_command=LES/CMD/door/entry_door_handle, LES/CMD/cabin_attendant_seat [SAAB Maindoor open] new_command=maindoor_open main_command=LES/CMD/door/entry_door ===================== Now I need the commands (two) for stair: 1. stair fold 2. stair slide Or exists only datarefs for stair? ======================== I have problem with cargo door, the handle of that door is inoperativ at me. It's a bug? Please help me Thank You!

Thank You, Goran!

Taxi with one engine after landing was the feathure in Russia (bed 90's years) for An-24 (Antonov 24) for fuel economy ))) SAAB must have it too! Rotation on short parkplace with one engine on power and second engine on idle can it well!

Ye, realy i need all commands to open the main door and to close it I wonna make via Python two combined commands for open and close (with animation of stair) for two knobs one for open (command group), another - for close (command group) My reason is start from cold and dark from appron (with Ground Handling deluxe from Jar) and not from cabin with closed doors It's for videos ))) Thank Yoy

Thank You very much! To close most be used the "neg" datarefs?

Dear Gregory! Can You post the datarefs for opening the main door. All operations for opening and closing - unlock..........turn the attendant seat.....ramp Thank You very much!

Assigned the axis for both condition levers I think that it is possible to assign the datarefs to buttons with Python script "xjoymap" too. But somewhat is wrong. I have dataref for switching the Prop synchronization - LES/saab/prop/prop_sync_toggle I have example from .ini file of the xjoymap: Button to dataref examples ============================ toggle mode For assigments with more than one value, it will define an additional *_rev command with reverse direction You can disable the automatic looping from the last value to the first one adding loop = false [Afterburner toggle] new_command=afterburner_1dataref=sim/cockpit2/engine/actuators/afterburner_enabledvalues = 0,1 ============================== I write command [SAAB Prop_Synchronization] loop = false ;; or without this string, it's no difference in the result new_command=prop_synchdataref= LES/saab/prop/prop_sync_toggle_enabledvalues = 0,1 And i look for new command in (from example): at "Creates a new "virtual command" at sim/xjoymap/NAV_APP" OK sim/xjoymap does not exist, but exist the command directory xjoymap/main I look for the new command and can not find it, no in the directory xjoymap, no in another directories Where is the mistake? ===================== I'm so sorry! Mistake was in syntaxis It works! [SAAB Prop_Synchronization] loop = false ;; with this string - toggle, without - two commans in directory xjoymap/main for ON and OFF the Prop synchronization new_command=prop_synch dataref= LES/saab/prop/prop_sync_toggle enabledvalues = 0,1

Thank You, Jim!

Dear Cameron, With AEW it's Your position clear. Thank You. To not make a new topic i ask hear my questions about Datarefs / Custom commands. I can not find custom command for the props sinchronization switch. But it has very inconvenient position for Cap How can i assign it on some knob or switch on my Saitek Rhino throttle device? Second question is about datarefs / custom commands for baro settings - baro std / baro neg / baro ps What of commands can i assign to knobs to control this datarefs? Thank You

Dear Developer, Dear SAAB fan, and livery-maker Thank You very much for Your Saab 340A. It is realy the wunderfull model. But it would even better if the airborn version (SAAB 340 Erieye) would have the appropriate cabin with three operator seats, electrical cabinets and operator consoles. It would be great to have this version. It can be an official payware addon or three part product (only interior), but - it must be It must be for SAAB fans that want simulate the military version of the aircraft. Can i hope, that the Erieye interior will be made some time from somebody. I personaly, for example, would buy it as separatly addon to high price.