Jump to content

Pastrong

Members
  • Posts

    22
  • Joined

  • Last visited

Everything posted by Pastrong

  1. Just installed the XP12 Duchess 76 from JF and get these strange effects (see attached image file). So I have the box asking for the SASL3_T12 serial number? (where do I get that) and strange hands and bodies in the pilot and copilot seats. Also can't access the tablet etc. I've attached the log file as well. I ran the developer reload to see if that made any difference but it didn't. Any help would be appreciated. Thanks. Paul Log.txt
  2. Sorry ment left hand side of screen (regarding popout).
  3. Have just updated to IXEG 737 v. 1.5.2 and found that after loading the aircraft I have no popout setup menu on the right hand side of the screen. I also believe there is now a setup menu in the Avitab that i connot find. I've attached my Logfile. Log.txt
  4. A quick question: Once the cargo door is open, how do you close it again? Previously there was a click spot at the top of the door but although I have clicked all the way round it and everywhere else in between, so far, I've not been able to find it in this latest version.
  5. So, I deleted all the Saab files completely also the installatiion files and re-downloaded from X-Aviation then went through the installation process. The result of this action is that I now have a functioning nosewheel with my foot pedals. Maybe the uninstall did not work correctly or the installation, who knows, but I'm happy with the re-install. I suggest anyone with the same issue should try deleting everything relating to the Saab including the uninstall files, download again, install and see if that also solves the problem.
  6. Having a bit of an issue with the noswheel steering since v1.6.5. Pressed down the nosewheel button as usual to connect my foot peddle yaw but it will not steer the plane. I recalibrated my foot peddals but that made no difference the yaw does not connect to the nosewheel. Whilst observing the nosewheel on the ground I noticed that it kept swinging from side to side erratically on its own without me touching anything. In order to steer I ended up using the foot brakes to steer, bit of a pain but I managed takeoff. How do I resolve this issue. Thanks.
  7. OK thanks, I'll try it again today maybe it's somewhere else down the line.
  8. Hi, I'm just trying to download the Saab 1.6.1 update and the installer is giving me a download time for components of over 7 hours. When I downloaded v1.6.0 it only took me a few minutes. I've checked speeds at my end on fibre and I have no issues, so is the issue with x-aviation?
  9. Gizmo64 issue is resolved, I had to turn on the Tool Tray in Gizmo preferences, so that's working OK now. The G530 will take some time to analyze.
  10. Sorry forgot to attach the log file. Log.txt
  11. Trying to start a flight EGPN - EGMC. Get everything up and running nicely then start programming the 530 but when I get to the point of selecting the STAR into EGMC as soon as I click on it that locks up XP and closes it down. (I've attached my log). This happened to me twice so I intalled Reality GTN750 and used the popup to program the route which worked fine and am fly now without issues towards EGMC. The log text doesn't seem to say much so I'm not sure if this is an XP, SAAB or Gizmo issue. Regarding Gizmo, I'm using Gizmo64 and I do not have the menu list on the right side of the screen, this also means I don't get the Saab menu either. So I have to pick up Gizmo from the PLUGIN dropdown list and select the item from the list that way which is a bit cumbersum. How do I get Gizmo back onto the right side of my screen?
  12. I use x-camera, if I switch that off I'm left with standard XP number pad keys which are not very flexible and x-camera never caused this issue before. Anyway it's not an issue really I know where all the knobs and switches are anyway, it was just the convenience, I'm just lazy. Thanks for the input.
  13. Just a small thing that I noticed changed when using the checklist system, when i click on the view button next to the item I wish to check, the view immediately changes to the item but within about a second it switches back out again so you hardly get time to look at it. Is there somewhere you can adjust the timing so that it stays on the item to be viewed long?
  14. Please ignor my topic, I've found my mistake, I missed the tick box to include the cargo version during the installation. All is good again, sorry for disturbing your Sunday. Thanks.
  15. Just downloaded the v1.6 update for the Saab 340A but on starting XP11 I can't find the cargo version. During the install process it deletes the old files apart from liveries and x-camera, it loads files for the passenger version but not the cargo version. Tried re-installing but I just get the sam situation. Was the cargo version missed out of the update?
  16. Ben, further to my comments. Strange as it may seem I closed down XP and rebooted and then loaded the BN2 again and the panel is showing up perfectly without any gaps!!! The first time I started XP after deleting the XP11Gizmo64.plugin and loaded the BN2 nothing had changed but the second time it had, strange, however it now won't load with the GTN750 or 650 even though they are loaded in the plugin dropdown. Before I had the issue with the panel they always loaded up fine.
  17. Ben, thanks for your advice, unfortunately it didn't resolve the issue I still have lots of spaces in my panel. I don't understand half of what is in my log file, I've been using XP10 and subsequently 11 for several years so I guess there has been a buildup of issues over time. I suppose I should completely reinstall XP on a new disk to clear out all the junk but just the thought of having to reinstall all the plugins etc. is just mind boggling. If you have any other ideas where the issue lies I would be very greatful for your advice. At the moment I only have two aircraft that are not behaving, the new SR22 keep crashing XP and the BN2 panel, other than that it's all running fine. Kind regards Paul
  18. Loaded my BN2 today but the flight poanel is not loading correctly, it's full of holes. The only additions to XP11.41 I have made since the last time I used this aircraft are the new German Islands from Aerosoft. I have tried other airports but the BN2 keeps loading with the same issue. I've also loaded other aircraft without getting this issue. Log file and screen shot attached. Kind regards Paul Log.txt
  19. Had the same issue as Q8Pilot when I first installed the SR22. When I reinstalled and then loaded with default C172 I had the Gizmo licence request for email and password come up even though it was the C172 and not an x-aviation plane, as soon as I had entered both and waited for it to complete registration XP crashed. I've attached my log file. Log_270720_SR22.txt Log.txt
  20. Further to my request, previously I installed including the latest Gizmo update. I've just reinstalled again using the stable Gizmo version and it no loads without the error message. So the issue with my setup is down to a conflict between the latest Gizmo version and IXEG 733 which is strange because the 733 v1.30 worked perfectly with the latest Gizmo, although I did have to switch off my security to get it to load. The only other issue I have is that when I set the Cold & Dark setting in the Preflight menu and click on apply it crashes XP. So, conclusion: Things are not stable yet.
  21. Hi, just updated to IXEG 733 v1.32, downloaded and installed in the usual way following x-aviation instructions. When I load the aircraft in XP11 I get and unsupported file path message. I've tried two reinstalls but keep getting the same message. It's been suggested that there could be a doubling up of files but I cannot see any such issue. Previous updates have always worked without any problems at all. Could someone assist please? Kind regards Paul Armstrong
  22. Hi, I've updated my BN-2 to version 1.0.1 and reinstalled the AFM G5 as instructed, but now when I call up the aircraft I get all the glass areas blanked out (see attached snapshot) apart from the G5. I installed the BN-2 v1.0.1 by first using the x-aviation uninstall program and then installing as normal. I then copied the G5 acf file to the BN-2 route directory and the plugins to the BN-2 plugin directory. I assume this was the correct way to install the update. Any help would be appreciated.
×
×
  • Create New...