frisone

OK, the magneto switches are operable now! I'm not sure what started them to function. Partly this may be my ignorance, I didn't expect I had to move the mouse and move it that far to operate the switch, but I have tried that without success earlier. A note in the documentation might be helpful! The only remaining issues now are the autopilot buttons. The on/off switch is still inoperable as are the roll and pitch knobs. The yaw knob is the only knob that I'm able to rotate, I discovered that a key can be a assigned to some LES/DC3 items and when I assign a key to the item "LES/DC3/ignition button" I can operate the ignition switch with a key (as I can by a mouse click). However after assigning a key to e.g. "LES/DC3/roll left" I cannot operate the button with that key. Are these the items indeed meant to control the knobs? Any idea why these knobs cannot be operated? Jos

Hi Ben, Thanks for the help. I deleted the folder and the "could not call stat() on target" indeed disappeared. The "undefined function" errors however remain. Especially a missing OnMouseClick function sounds suspect as what I'm experiencing is that when I click the mouse on the magneto switches noting happens. Jos

I see the image wasn't uploaded, I'll try it this way: And I forgot to mention that I don't use any special hardware, I'm using just a simple USB joystick. Jos

As the behaviour of the switches in 1.4 is exactly the same as it was in 1.3 I suspected that the installation of version 1.4 somehow did not suceed, I therefore uninstalled the DC-3, removed the Gizmo folders and then installed 1.4 again. Alas, to no succes. I noticed however that the Gizmo console reports some errors: And below is the contents of my log.txt file. log.txt for X-Plane 10.25r1 (64-bit build 102503) compiled on Nov 14 2013 22:03:02This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions.If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.Windows 6.1 (build 7601/2) Service Pack 1This is a 64-bit version of Windows.CPU type: 8664Physical Memory (total for computer): 8579211264Maximum Virtual Memory (for X-Plane only): 8796092891136CPU 0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz Speed (mhz): 2933CPU 0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz Speed (mhz): 2933CPU 0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz Speed (mhz): 2933CPU 0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz Speed (mhz): 2933CPU 0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz Speed (mhz): 2933CPU 0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz Speed (mhz): 2933CPU 0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz Speed (mhz): 2933CPU 0: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz Speed (mhz): 2933X-System folder:'C:\Users/gaf/X-Plane 10/', case sensitive=0WGL_ARB_extensions_string WGL_ARB_pixel_format WGL_ATI_pixel_format_float WGL_ARB_pixel_format_float WGL_ARB_multisample WGL_EXT_swap_control WGL_ARB_pbuffer WGL_ARB_render_texture WGL_ARB_make_current_read WGL_EXT_extensions_string WGL_ARB_buffer_region WGL_EXT_framebuffer_sRGB WGL_ATI_render_texture_rectangle WGL_EXT_pixel_format_packed_float WGL_I3D_genlock WGL_NV_swap_group WGL_ARB_create_context WGL_AMD_gpu_association WGL_AMDX_gpu_association WGL_ARB_create_context_profile WGL_NV_float_bufferDisabling sRGB for ATI Catalyst 12-10 and older drivers.OpenGL Vendor : ATI Technologies Inc.OpenGL Render : Radeon HD 6800 SeriesOpenGL Version : 4.0.10243 Compatibility Profile Context (400/10243)OpenGL Extensions: GL_AMDX_debug_output GL_AMDX_vertex_shader_tessellator GL_AMD_conservative_depth GL_AMD_debug_output GL_AMD_draw_buffers_blend GL_AMD_name_gen_delete GL_AMD_performance_monitor GL_AMD_sample_positions GL_AMD_seamless_cubemap_per_texture GL_AMD_shader_stencil_export GL_AMD_texture_cube_map_array GL_AMD_texture_texture4 GL_AMD_transform_feedback3_lines_triangles GL_AMD_vertex_shader_tessellator GL_ARB_blend_func_extended GL_ARB_color_buffer_float GL_ARB_copy_buffer GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_draw_indirect GL_ARB_draw_instanced GL_ARB_explicit_attrib_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_instanced_arrays GL_ARB_map_buffer_range GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_shader_atomic_counters GL_ARB_shader_bit_encoding GL_ARB_shader_objects GL_ARB_shader_subroutine GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shadow GL_ARB_shadow_ambient GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_compression GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_snorm GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_envmap_bumpmap GL_ATI_fragment_shader GL_ATI_meminfo GL_ATI_separate_stencil GL_ATI_texture_compression_3dc GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_copy_buffer GL_EXT_copy_texture GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texgen_reflection GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_buffer_object_rgb32 GL_EXT_texture_compression_bptc GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_shared_exponent GL_EXT_texture_snorm GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_IBM_texture_mirrored_repeat GL_KTX_buffer_region GL_NV_blend_square GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_explicit_multisample GL_NV_float_buffer GL_NV_half_float GL_NV_primitive_restart GL_NV_texgen_reflection GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays GL_WIN_swap_hint WGL_EXT_swap_controlthreaded_avail : 1 dis_fog_avail : 0 instance_avail : 1 pbo_avail : 1aniso_avail : 1 gshader_avail : 1 buniform_avail : 1 shad_lod_avail : 1gpu_shad4_avail : 1 framebuf_avail : 1 frameblit_avail : 1 drawbuf2_avail : 1tex_float_avail : 1 packed_stencil : 1 texture_rg : 1 framebuffer_srgb : 0copy_buf_avail : 1 pinned_avail : 0 sync/fence : 1max tex units : 8 (16/16)max iso filtering: 16.000000max texture size : 16384 (hardware limit)max point size : 63.000000idx in vram : 1GLSL Version :4.00/400first-gen shaders: 0(16/16384/64/32/16/16384/16384)This video card is: DX10 or 11 - With instancing (found glMapBufferRange)CPU count : 8OpenAL loaded: Resources/dlls/64/openal32.dllOpenAL devices: OpenAL SoftOpen AL default device:OpenAL SoftOpenAL vendor : OpenAL CommunityOpenAL renderer : OpenAL SoftOpenAL version : 1.1OpenAL hardware : OpenAL SoftOpenAL extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_DEDICATED ALC_EXT_disconnect ALC_EXT_EFX ALC_EXT_thread_local_context ALC_SOFT_loopback AL_EXT_ALAW AL_EXT_DOUBLE AL_EXT_EXPONENT_DISTANCE AL_EXT_FLOAT32 AL_EXT_IMA4 AL_EXT_LINEAR_DISTANCE AL_EXT_MCFORMATS AL_EXT_MULAW AL_EXT_MULAW_MCFORMATS AL_EXT_OFFSET AL_EXT_source_distance_model AL_LOKI_quadriphonic AL_SOFT_buffer_samples AL_SOFT_buffer_sub_data AL_SOFTX_deferred_updates AL_SOFT_direct_channels AL_SOFT_loop_pointsFetching plugins for C:\Users/gaf/X-Plane 10/Resources/pluginsLoaded: C:\Users/gaf/X-Plane 10/Resources/plugins/PluginAdmin/64/win.xpl.Gizmo64: v13.11.05.0205 Win (JIT) 64-bit Starting up... built: Nov 5 2013, 02:09:08Gizmo64: X-Plane Folder: (C:/Users/gaf/X-Plane 10/)Gizmo64: Graphics Init.. Reserving block of 8 textures for Gizmo64.plugin.Gizmo64: Finding Common DataRefs..Gizmo64: Init particles..Gizmo64: Init http thread..Gizmo64: Init Mapping.. Init oven thread..Gizmo64: Init cURL.Gizmo64: Creating menus..Gizmo64: Starting up..Gizmo64: New OpenAL hooks instance..Gizmo64: OpenAL: Using shared OpenAL context..Gizmo64: Creating LuaVM instance (custom allocator)..Gizmo64: Loading nav.api constants..Gizmo64: Loading nav.api constants..DONEGizmo64: Init IO Jail..Gizmo64: LoadScript from Buffer (IO Jail.aes)---------------Gizmo64: Loading Firmware..Gizmo64: LoadScript from Buffer (firmware_init.lua.aes)Gizmo64: LoadScript from Buffer (api_patches.lua.aes)Gizmo64: LoadScript from Buffer (core/vardump.lua.aes)Gizmo64: LoadScript from Buffer (core/prefs_api.lua.aes)Gizmo64: LoadScript from Buffer (core/sound_api.lua.aes)Gizmo64: LoadScript from Buffer (core/PointCollisionTest.lua.aes)Gizmo64: LoadScript from Buffer (core/obj8_loader.lua.aes)Gizmo64: LoadScript from Buffer (core/GuiWindowResizerHandle.lua.aes)Gizmo64: LoadScript from Buffer (core/gxt_api.lua.aes)Gizmo64: LoadScript from Buffer (extensions/Console/Console.lua.aes)Gizmo64: LoadScript from Buffer (extensions/ToolTray/ToolTray.lua.aes)Gizmo64: LoadScript from Buffer (extensions/AboutGizmo/AboutGizmo.lua.aes)Gizmo64: LoadScript from Buffer (extensions/Activation/Activation.lua.aes)Gizmo64: LoadScript from Buffer (extensions/Activation/IPC.lua.aes)Gizmo64: LoadScript from Buffer (extensions/HotFix/HotFix.lua.aes)Gizmo64: LoadScript from Buffer (extensions/RebootButton/RebootButton.lua.aes)Gizmo64: LoadScript from Buffer (extensions/Shell/Shell.lua.aes)Gizmo64: LoadScript from Buffer (extensions/ToyBox/ToyBox.lua.aes)Gizmo64: LoadScript from Buffer (extensions/X-Pilot/X-Pilot.lua.aes)Gizmo64: Register Callbacks..Gizmo64: Building Mouse Trap..Gizmo64: XPluginStart - OK.Loaded: C:\Users/gaf/X-Plane 10/Resources/plugins/Gizmo64.plugin/64/win.xpl.Initializing off screen memory.Initializing off screen memory complete.I found the following scenery packages (prioritized in this order): 0 Custom Scenery/EHSB Camp New Amsterdam/ 1 Custom Scenery/Global Airports/ 2 Custom Scenery/Aerosoft - EBBR Brussels/ 3 Custom Scenery/Aerosoft - EDDF Frankfurt/ 4 Custom Scenery/Aerosoft - EDDH Hamburg/ 5 Custom Scenery/Aerosoft - EDDK Cologne/ 6 Custom Scenery/Aerosoft - EDDM Munich/ 7 Custom Scenery/Aerosoft - EDDS Stuttgart/ 8 Custom Scenery/Aerosoft - EDDT Berlin Tegel/ 9 Custom Scenery/Aerosoft - EDDV Hannover/ 10 Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/ 11 Custom Scenery/Aerosoft - EGBB Birmingham/ 12 Custom Scenery/Aerosoft - EGKK London-Gatwick/ 13 Custom Scenery/Aerosoft - EGLL Heathrow/ 14 Custom Scenery/Aerosoft - EGPF Glasgow/ 15 Custom Scenery/Aerosoft - EGSS London-Stansted/ 16 Custom Scenery/Aerosoft - EIDW Dublin/ 17 Custom Scenery/Aerosoft - LEBL Barcelona/ 18 Custom Scenery/Aerosoft - LEMD Madrid/ 19 Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/ 20 Custom Scenery/Aerosoft - LFPG Paris CDG/ 21 Custom Scenery/Aerosoft - LFPO Paris Orly/ 22 Custom Scenery/Aerosoft - LPFR Faro/ 23 Custom Scenery/Aerosoft - LSGG Genf/ 24 Custom Scenery/KSEA Demo Area/ 25 Custom Scenery/KSEA Demo Terrain/ 26 Custom Scenery/LOWI Demo Area/ 27 Global Scenery/Bug Fixes/ 28 Global Scenery/X-Plane 10 Global Scenery/ 29 Resources/default scenery/1000 autogen/ 30 Resources/default scenery/1000 decals/ 31 Resources/default scenery/1000 forests/ 32 Resources/default scenery/1000 roads/ 33 Resources/default scenery/1000 urban terrain/ 34 Resources/default scenery/1000 world terrain/ 35 Resources/default scenery/700 roads/ 36 Resources/default scenery/900 beaches/ 37 Resources/default scenery/900 europe objects/ 38 Resources/default scenery/900 forests/ 39 Resources/default scenery/900 roads/ 40 Resources/default scenery/900 us objects/ 41 Resources/default scenery/900 world object placeholders/ 42 Resources/default scenery/airport decals/ 43 Resources/default scenery/airport scenery/ 44 Resources/default scenery/default apt dat/ 45 Resources/default scenery/default atc/ 46 Resources/default scenery/sim objects/ATC audio initialized.0:00:00.000 D/HID: HID Bridge Running0:00:00.000 I/REN: Setting |draw view indicator read from prefs as 1.0:00:00.000 I/REN: Setting |dim under high G-load or hypoxia read from prefs as 1.0:00:00.000 I/REN: Setting |draw hi-res planet textures from orbit read from prefs as 1.0:00:00.000 I/REN: Setting |draw forest fires and balloons read from prefs as 0.0:00:00.000 I/REN: Setting |draw birds and deer in nice weather read from prefs as 0.0:00:00.000 I/REN: Setting |draw aircraft carriers and frigates read from prefs as 0.0:00:00.000 I/REN: Setting |draw Aurora Borealis read from prefs as 0.0:00:00.000 I/REN: Setting |number of trees read from prefs as 2.0:00:00.000 I/REN: Setting |number of objects read from prefs as 3.0:00:00.000 I/REN: Setting |number of roads read from prefs as 2.0:00:00.000 I/REN: Setting |number of cars read from prefs as 1.0:00:00.000 I/REN: Setting |world detail distance read from prefs as 4.0:00:00.000 I/REN: Setting |airport detail read from prefs as 1.0:00:00.000 I/REN: Setting |water reflection detail read from prefs as 0.0:00:00.000 I/REN: Setting compress textures to save VRAM read from prefs as 1.0:00:00.000 I/REN: Setting |runways follow terrain contours read from prefs as 1.0:00:00.000 I/REN: Setting |draw volumetric fog read from prefs as 1.0:00:00.000 I/REN: Setting |draw per pixel lighting read from prefs as 1.0:00:00.000 I/REN: Setting |HDR rendering read from prefs as 1.0:00:00.000 I/REN: Setting |shadow detail read from prefs as 1.0:00:00.000 I/REN: Setting |atmospheric scattering read from prefs as 1.0:00:00.000 I/REN: Setting |HDR anti-aliasing read from prefs as 0.0:00:00.000 I/REN: Setting |3-D bump-maps read from prefs as 1.0:00:00.000 I/REN: Setting |gritty detail textures read from prefs as 1.0:00:00.000 D/State: Received: 0:00:00:00.000 D/HID: Hardware ADDED(045e, 003c) - SideWinder Joystick at path \\?\hid#vid_045e&pid_003c#7&1ea38d18&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}0:00:00.000 I/JOY: REGISTER Joystick device: SideWinder Joystick - VID:1118PID:60, this is a familiar device.0:00:00.000 D/HID: BUTTON Added Index: 0 (0009, 0001) for handle: 0x8e5f14a00:00:00.000 D/HID: BUTTON Added Index: 1 (0009, 0002) for handle: 0x8e5f14a00:00:00.000 D/HID: BUTTON Added Index: 2 (0009, 0003) for handle: 0x8e5f14a00:00:00.000 D/HID: BUTTON Added Index: 3 (0009, 0004) for handle: 0x8e5f14a00:00:00.000 D/HID: BUTTON Added Index: 4 (0009, 0005) for handle: 0x8e5f14a00:00:00.000 D/HID: BUTTON Added Index: 5 (0009, 0006) for handle: 0x8e5f14a00:00:00.000 D/HID: BUTTON Added Index: 6 (0009, 0007) for handle: 0x8e5f14a00:00:00.000 D/HID: BUTTON Added Index: 7 (0009, 0008) for handle: 0x8e5f14a00:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0031) for handle: 0x8e5f14a0. Min/Max 0 - 2550:00:00.000 D/HID: AXIS Added Index: 1 (0001, 0030) for handle: 0x8e5f14a0. Min/Max 0 - 2550:00:00.000 D/HID: AXIS Added Index: 2 (0001, 0036) for handle: 0x8e5f14a0. Min/Max 0 - 2550:00:00.000 D/HID: END HARDWARE0:00:15.172 I/ACF: Loading airplane number 0 with Aircraft/X-Aviation/Douglas DC-3/LES_Douglas DC-3(Wheels).acfGizmo64: C-Core: gizmo_AircraftChanged()Gizmo64: Aircraft name: (LES_Douglas DC-3(Wheels).acf)Gizmo64: Aircraft path: (C:/Users/gaf/X-Plane 10/Aircraft/X-Aviation/Douglas DC-3/)Gizmo64: X-Plane-Relative Folder Path: (Aircraft/X-Aviation/Douglas DC-3/)Gizmo64: X-Plane-Relative File Path: (Aircraft/X-Aviation/Douglas DC-3/LES_Douglas DC-3(Wheels).acf)Gizmo64: Cleaning up.. Reset timers: Reset menus.. Reset GUI Widgets.. Reset GUI Windows.. Reset OBJ8 handles.. Releasing loaded objects in array, count: 0 Reset datarefs.. Reset Bullet Physics.. Reset OpenAL.. Reset Particle Engines.. Reset FBO pool.. Reset event registrations.. Shutting down Lua VM Releasing X-Plane overrides.. Releasing all X-Plane overrides.Gizmo64: Cleanup Finished.Gizmo64: Recycling LuaVM: 0Gizmo64: Custom alloc: c/d:0 alloc:12778Gizmo64: Starting up..Gizmo64: New OpenAL hooks instance..Gizmo64: OpenAL: Using shared OpenAL context..Gizmo64: Creating LuaVM instance (custom allocator)..Gizmo64: Loading nav.api constants..Gizmo64: Loading nav.api constants..DONEGizmo64: Init IO Jail..Gizmo64: LoadScript from Buffer (IO Jail.aes)---------------Gizmo64: Loading Firmware..Gizmo64: LoadScript from Buffer (firmware_init.lua.aes)Gizmo64: LoadScript from Buffer (api_patches.lua.aes)Gizmo64: LoadScript from Buffer (core/vardump.lua.aes)Gizmo64: LoadScript from Buffer (core/prefs_api.lua.aes)Gizmo64: LoadScript from Buffer (core/sound_api.lua.aes)Gizmo64: LoadScript from Buffer (core/PointCollisionTest.lua.aes)Gizmo64: LoadScript from Buffer (core/obj8_loader.lua.aes)Gizmo64: LoadScript from Buffer (core/GuiWindowResizerHandle.lua.aes)Gizmo64: LoadScript from Buffer (core/gxt_api.lua.aes)Gizmo64: LoadScript from Buffer (extensions/Console/Console.lua.aes)Gizmo64: LoadScript from Buffer (extensions/ToolTray/ToolTray.lua.aes)Gizmo64: LoadScript from Buffer (extensions/AboutGizmo/AboutGizmo.lua.aes)Gizmo64: LoadScript from Buffer (extensions/Activation/Activation.lua.aes)Gizmo64: LoadScript from Buffer (extensions/Activation/IPC.lua.aes)Gizmo64: LoadScript from Buffer (extensions/HotFix/HotFix.lua.aes)Gizmo64: LoadScript from Buffer (extensions/RebootButton/RebootButton.lua.aes)Gizmo64: LoadScript from Buffer (extensions/Shell/Shell.lua.aes)Gizmo64: LoadScript from Buffer (extensions/ToyBox/ToyBox.lua.aes)Gizmo64: LoadScript from Buffer (extensions/X-Pilot/X-Pilot.lua.aes)Gizmo64: Aircraft Author: Leading Edge SimulationsGizmo64: Aircraft Descrip: Douglas DC-3 Published by X-AviationGizmo64: ./scripts/deployment.key contents: (8708a88070002e1ab60f3f4724110bdc)Gizmo64: deployment.key is valid. Releasing all X-Plane overrides.Gizmo64: LoadScript from Buffer (init.lua.aes)Gizmo64: LoadScript from Buffer (LES_DC3.lua.aes)Gizmo64: Event Map cleared.Gizmo64: Completed gizmo_Restart(..)0:00:15.172 I/FLT: Init p0 type:loc_tak apt:EHSB rwy:090:00:15.172 I/SCN: DSF load time: 6869361 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+000/+51+004.dsf (391294 tris)0:00:15.172 I/SCN: DSF load time: 4640025 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+000/+51+005.dsf (346063 tris)0:00:15.172 I/SCN: DSF load time: 4285501 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+000/+51+006.dsf (235850 tris)0:00:15.172 I/SCN: DSF load time: 4777018 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+000/+52+004.dsf (529469 tris)0:00:15.172 I/SCN: DSF load time: 6086042 for file Custom Scenery/EHSB Camp New Amsterdam/Earth nav data/+50+000/+52+005.dsf (0 tris)0:00:15.172 I/SCN: DSF load time: 4215103 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+000/+52+005.dsf (413158 tris)0:00:15.172 I/SCN: Failed to find resource 'test/AGtrees_test.for' (parent = 'Resources/default scenery/airport scenery/Common_Elements/Misc_Buildings/' at 'Resources/default scenery/airport scenery/Common_Elements/Misc_Buildings/test/AGtrees_test.for'0:00:15.172 I/SCN: Failed to find resource 'test/AGtrees_test.for' (parent = 'Resources/default scenery/airport scenery/Common_Elements/Misc_Buildings/' at 'Resources/default scenery/airport scenery/custom objects/test/AGtrees_test.for'0:00:15.172 I/SCN: DSF load time: 307566 for file Custom Scenery/Global Airports/Earth nav data/+50+000/+52+006.dsf (0 tris)0:00:15.172 I/SCN: DSF load time: 3886453 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+50+000/+52+006.dsf (326057 tris)0:00:15.172 I/SCN: Preload time: 331956380:02:09.925 D/State: Received: 0:60:02:09.998 I/ACF: Loading airplane number 1 with Aircraft/Helicopters/Robinson R22 Beta/Robinson R22 Beta.acf0:02:09.998 I/FLT: Init p1 type:loc_general_area lat:51.887074 lon:3.903093 ele(ft):-1481.806396 psi:197.672043 spd(kts):31.5397820:02:09.998 I/ACF: Loading airplane number 2 with Aircraft/General Aviation/Cirrus TheJet/c4.acf0:02:09.998 I/FLT: Init p2 type:loc_general_area lat:51.794968 lon:4.615497 ele(ft):36512.285156 psi:242.805252 spd(kts):121.2530980:02:09.998 I/ACF: Loading airplane number 3 with Aircraft/Heavy Metal/B747-400 United/747-400 United.acf0:02:09.998 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/Heavy Metal/B747-400 United/' at 'Aircraft/Heavy Metal/B747-400 United/Panel.dds'0:02:09.998 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/Heavy Metal/B747-400 United/' at 'Aircraft/Heavy Metal/B747-400 United/Panel.png'0:02:09.998 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/Heavy Metal/B747-400 United/' at 'Aircraft/Heavy Metal/B747-400 United/Panel.bmp'0:02:09.998 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/Heavy Metal/B747-400 United/' at 'Aircraft/Heavy Metal/B747-400 United/Panel.dds'0:02:09.998 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/Heavy Metal/B747-400 United/' at 'Aircraft/Heavy Metal/B747-400 United/Panel.png'0:02:09.998 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/Heavy Metal/B747-400 United/' at 'Aircraft/Heavy Metal/B747-400 United/Panel.bmp'0:02:09.998 I/FLT: Init p3 type:loc_general_area lat:51.401623 lon:4.652332 ele(ft):31329.656250 psi:231.115463 spd(kts):220.7756040:02:09.998 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/Heavy Metal/B747-400 United/' at 'Aircraft/Heavy Metal/B747-400 United/Panel.dds'0:02:09.998 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/Heavy Metal/B747-400 United/' at 'Aircraft/Heavy Metal/B747-400 United/Panel.png'0:02:09.998 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/Heavy Metal/B747-400 United/' at 'Aircraft/Heavy Metal/B747-400 United/Panel.bmp'0:02:09.998 I/FLT: Init p1 type:loc_ram apt:EHSB rwy:090:02:09.998 I/ATC: p1(N01XP) FP filed - EHSB to SCSE at 10000 via LEQ DVL CHW NTS QPR XIDAN SEPAL BEGAS BERUX KOPAS ARMED DETOX 15SNT KOMUT MANOX SNT FUN NELSO TENKO NEXUX PIBIL GOBEG IXIKU LAPTU 2325N 2025N 2027N 2029N 1830N 1630N 1632N 1532N 1330N 1130N DIGUN SLI RIXOM YTZ CRJ UGUTO IRUKI NABOL UVBIL CIA ITAMA VIR SUR TAR JUJ ALGAR SORTI LAR EGIKA SER , type=20:02:09.998 I/ATC: p2(N02XP) Popup FP filed to EHSB at 5000 via , type=20:02:09.998 D/ATC: Validating altitude for p2(N02XP): filed: 5000 usable_rte_dist: 10.821211 maxDescent: 2000 maxAlt: 3000 minAlt: 5000 chosen_alt: 30000:02:09.998 W/ATC: Setting route alt to 3000 because they filed too high for a descent!0:02:09.998 D/ATC: p2(N02XP): Cleared IFR0:02:09.998 I/FLT: Init p2 type:loc_specify_lle lat:52.099876 lon:5.641044 ele(ft):5000.000000 psi:278.000000 spd(kts):364.4708250:02:09.998 D/ATC: p2(N02XP): FlyToPoints0:02:09.998 D/ATC: p2(N02XP): Maintain 2998ft0:02:09.998 I/FLT: Init p3 type:loc_ram apt:EHSB rwy:090:02:09.998 I/ATC: p3(N03XP) FP filed - EHSB to KILG at 36000 via KOK BNN BCN VYL38 BEL CON KUGUR MASIT VENER PIKIL 58N15 58N20 56N20 56N30 54N30 52N30 YYT YQX YJT YGR KERPA YQM HUL AUG MHT BDR VCN , type=2Gizmo64: OpenGL<->Physics Offset Default Init: -16444.299, -24.199, -14210.662Gizmo64: Tried to use physics engine without loading an OBJ8 file. Ignored, can't draw!0:02:29.131 D/ATC: p2(N02XP): Fly Heading: 2370:02:29.131 D/ATC: p2(N02XP): Maintain 5000ft0:02:29.131 D/ATC: Validating altitude for p1(N01XP): filed: 10000 usable_rte_dist: 6125.109863 maxDescent: 1531000 maxAlt: 1531000 minAlt: 10000 chosen_alt: 100000:02:29.131 D/ATC: p1(N01XP): Cleared IFR0:02:29.131 D/ATC: p1(N01XP): Squawk 47000:02:31.859 D/ATC: Validating altitude for p3(N03XP): filed: 36000 usable_rte_dist: 3329.726074 maxDescent: 832000 maxAlt: 832000 minAlt: 36000 chosen_alt: 360000:02:31.859 D/ATC: p3(N03XP): Cleared IFR0:02:31.859 D/ATC: p3(N03XP): Squawk 47010:02:31.918 D/ATC: p1(N01XP): Taxi (65 points issued)0:02:32.201 D/ATC: p3(N03XP): Taxi (68 points issued)0:04:06.016 I/ATC: Airport flow changed at EBAW!CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South0:04:06.016 I/ATC: Changing EBAW CabState from 0 to 10:04:06.016 I/ATC: All departures are done at EBAW. Advancing...0:04:06.016 I/ATC: Changing EBAW CabState from 1 to 20:04:06.016 I/ATC: All arrivals are done at EBAW. Advancing...0:04:06.016 I/ATC: Changing EBAW CabState from 2 to 00:04:06.016 I/ATC: Airport flow changed at EBKH!CurFlow: AUTOGEN: West NewFlow: AUTOGEN: South0:04:06.016 I/ATC: Changing EBKH CabState from 0 to 10:04:06.016 I/ATC: All departures are done at EBKH. Advancing...0:04:06.016 I/ATC: Changing EBKH CabState from 1 to 20:04:06.016 I/ATC: All arrivals are done at EBKH. Advancing...0:04:06.016 I/ATC: Changing EBKH CabState from 2 to 00:04:06.016 I/ATC: Airport flow changed at EBBT!CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South0:04:06.016 I/ATC: Changing EBBT CabState from 0 to 10:04:06.016 I/ATC: All departures are done at EBBT. Advancing...0:04:06.016 I/ATC: Changing EBBT CabState from 1 to 20:04:06.016 I/ATC: All arrivals are done at EBBT. Advancing...0:04:06.016 I/ATC: Changing EBBT CabState from 2 to 00:04:06.016 I/ATC: Airport flow changed at EHBD!CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South0:04:06.016 I/ATC: Changing EHBD CabState from 0 to 10:04:06.016 I/ATC: All departures are done at EHBD. Advancing...0:04:06.016 I/ATC: Changing EHBD CabState from 1 to 20:04:06.016 I/ATC: All arrivals are done at EHBD. Advancing...0:04:06.016 I/ATC: Changing EHBD CabState from 2 to 00:04:06.016 I/ATC: Airport flow changed at EHDL!CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South0:04:06.016 I/ATC: Changing EHDL CabState from 0 to 10:04:06.016 I/ATC: All departures are done at EHDL. Advancing...0:04:06.016 I/ATC: Changing EHDL CabState from 1 to 20:04:06.016 I/ATC: All arrivals are done at EHDL. Advancing...0:04:06.016 I/ATC: Changing EHDL CabState from 2 to 00:04:06.016 I/ATC: Airport flow changed at EBBL!CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South0:04:06.016 I/ATC: Changing EBBL CabState from 0 to 10:04:06.016 I/ATC: All departures are done at EBBL. Advancing...0:04:06.016 I/ATC: Changing EBBL CabState from 1 to 20:04:06.016 I/ATC: All arrivals are done at EBBL. Advancing...0:04:06.016 I/ATC: Changing EBBL CabState from 2 to 00:04:06.016 I/ATC: Airport flow changed at EDLN!CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South0:04:06.016 I/ATC: Changing EDLN CabState from 0 to 10:04:06.016 I/ATC: All departures are done at EDLN. Advancing...0:04:06.016 I/ATC: Changing EDLN CabState from 1 to 20:04:06.016 I/ATC: All arrivals are done at EDLN. Advancing...0:04:06.016 I/ATC: Changing EDLN CabState from 2 to 00:04:06.016 I/ATC: Airport flow changed at EHWO!CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South0:04:06.016 I/ATC: Changing EHWO CabState from 0 to 10:04:06.016 I/ATC: All departures are done at EHWO. Advancing...0:04:06.016 I/ATC: Changing EHWO CabState from 1 to 20:04:06.016 I/ATC: All arrivals are done at EHWO. Advancing...0:04:06.016 I/ATC: Changing EHWO CabState from 2 to 00:04:06.016 I/ATC: Airport flow changed at EBZR!CurFlow: AUTOGEN: East NewFlow: AUTOGEN: South0:04:06.016 I/ATC: Changing EBZR CabState from 0 to 10:04:06.016 I/ATC: All departures are done at EBZR. Advancing...0:04:06.016 I/ATC: Changing EBZR CabState from 1 to 20:04:06.016 I/ATC: All arrivals are done at EBZR. Advancing...0:04:06.016 I/ATC: Changing EBZR CabState from 2 to 0Gizmo64: LoadScript from Buffer (extensions/Notepad/Notepad.lua.aes)Gizmo64: LoadScript from Buffer (extensions/FileBrowser/FileBrowser.lua.aes)Regards, Jos

Thanks for the update and your support. Unfortunately the update hasn't solved my problems. I still cannot operate the magneto switches. I changed the view on these switches, from above, from both sides, but I still cannot get them to move. I'm running X-plane 10.25 (64 bit) with the DC-3 V1.4. I'm now at a point of getting a bit frustrated. When I buy a product I expect it to work and not having to fiddle with it for hours, trying to get it functional. Jos