Jump to content

BAe Jetstream 32 Interactive Checklist 0.8


About This File

Hi there,

Thanks for downloading this file, I hope you will find it as useful as I hope to as I generally cannot cope that well in the Jetstream 32 without following the checklists - I always miss something and then: BANG! There goes an engine.. again.

The intention behind creating this series of (24!) checklists was to help people have an easy way of staying on top of the Jetstream 32 before it gets carried away or you get lost in what it's doing.

I've also seen a lot of people having problems that have been reported as bugs to JRollon when 95% of the time it's down to pilot error. Hopefully this series of checklists will serve to negate some of these errors.

Please read the "Installation Instructions" - I've taken the time to try and cover most issues/questions, so please check there for any pointers!

If you want some visual pointers, I have created the following accompaying YouTube videos, which shows these checklists in action!

X-Plane Bae Jetstream 32 Interactive Checklists - Introduction / Installation

X-Plane Bae Jetstream 32 Interactive Checklists - Aircraft Acceptance to Takeoff

More to come as I get time to do them....

Cheers

James Gillies

forums.x-plane.org "JimboG"

03/02/2013

Checklists Included:

Aircraft Acceptance

Pre-Flight

Before Engine Start

Automatic Engine Start

After Start

Taxi

Before Takeoff

Takeoff

After Takeoff

Climb

Cruise

Descent

Before Landing

After Landing

Shutdown

Manual Engine Start (Left)

Manual Engine Start (Right)

Engine Fire (Left)

Engine Fire (Right)

Both Engines Fire

Engine Failure / In-Flight Shutdown

Descent/Approach - Single Engine

Landing - Single Engine

Go Around/Missed Approach


What's New in Version 0.8

Released

  • Description:
  • Change Log file describes details of any major enhancements or fixes to the previous version.
  • Version 0.8:
  • Date Released 03/02/2013
  • Public Release
  • # Fixed a small number of items to be more in-line with real world checklists.
  • # Added a reminder to switch on the XAcars Client during the "Before Engine Start" checklist based on user request.
  • # Switched around the engine start order for GPU-assisted engine starts during an automatic engine start.
  • # Added a remove GPU check and additional battery INT logic check.
  • # Added an additional Propeller area clear check for GPU-assisted engine starts.
  • # Corrected button names of engine selectors and engine start buttons.
  • # Increased dataref detection area slightly for Condition Lever taxi position.
  • # Fine-tuned Manual Engine Start checklists to better support GPU-assisted engine starts.
  • # Fine-tuned Manual Engine Start checklists to better support the right engine being started first during a GPU-assisted engine start.
  • # Fine-tuned Engine Fire and Both Engines Fire checklists to be more in line with real world checklists.
  • # Fine-tuned Shutdown checklist to leave Condition Levers in correct position for next air crew.
  • # Added new checklist: "Engine Failure/In-Flight Shutdown"
  • # Added new checklist: "Descent/Approach - Single Engine"
  • # Added new checklist: "Landing - Single Engine"
  • # Added new checklist: "Go Around/Missed Approach"
  • Version 0.7:
  • Date Released 25/01/2013
  • Private Release
  • # Dataref integration added (where possible and appropriate) for the following checklists:
  • Engine Fire (Left)
  • Engine Fire (Right)
  • Both Engines Fire
  • Version 0.6:
  • Date Released 24/01/2013
  • Private Release
  • # Dataref integration added (where possible and appropriate) for the following checklists:
  • Manual Engine Start (Left)
  • Manual Engine Start (Right)
  • Version 0.5:
  • Date Released 24/01/2013
  • Private Release
  • Pre-Flight Checklist:
  • # "Added Filament DIM SET" to Ice Protection.
  • Before Engine Start Checklist:
  • # Oil Cooler Flaps sensitivity was a bit narrow making detection of switch status not 100% accurate. Fixed.
  • # "Battery ON" nows says "Battery INT/GND".
  • # Changed Annunciator Test to manual check as the automatic status cannot stick, causing possible confusion.
  • # Added "Air Conditioning DEMIST/FOOT SET".
  • # Added "Air Conditioning Fan ON".
  • Automatic Engine Start Checklist:
  • # Adjusted the dataref detection zone for the "TAXI" position of the Condition Levers to be more accurate.
  • # Added "Left/Right Fuel Boost Pump OFF" to the bottom of the checklist.
  • After Start Checklist:
  • # Adjusted Stall Protection to show "OFF" for both switches.
  • Taxi Checklist:
  • # Fixed inaccurate dataref value for Taxi light switch.
  • # Added "Yaw Damper ON".
  • Before Takeoff Checklist:
  • # Fixed bad logic for "Taxi Lights OFF" dataref detection.
  • Climb Checklist:
  • # "1000 Feet - " now reads "10000 Feet -"
  • # "Landing Lights" section header now reads "Lights"
  • After Landing Checklist:
  • # Added "Yaw Damper OFF".
  • # Added "Ice Observation OFF".
  • Shutdown Checklist:
  • # "Battery ON" now reads "Battery OFF".
  • # Added "Emergency Lights OFF".
  • # Added "Stall Protection OFF" for both left and right.
  • # Added "SRL Computers OFF" for both left and right.
  • # Added "Propellor Syncro OFF".
  • # Added "Air Conditioning Fan OFF".
  • # Added reminder to switch to a default X-Plane aircraft before quitting the application.
  • # Altered the "Checklist Completed" message to confirm the specific checklist name, like in "aviation-speak".
  • Version 0.4:
  • Date Released 23/01/2013
  • Private Release
  • # Dataref integration added (where possible and appropriate) for the following checklists:
  • After Start
  • Taxi
  • Before Takeoff
  • Takeoff
  • After Takeoff
  • Climb
  • Cruise
  • Descent
  • Before Landing
  • After Landing
  • Shutdown
  • # Moved "Manual Engine Start" checklists to the bottom of the list (after "Shutdown") to allow focus on the remaining dataref integrations on the other lists. When the other lists have been done, I'll go back to these two, complete them and then possibly move them back to their original position in a leter version.
  • # Tweaks to "Before Engine Start" to include a couple of missing checklist items.
  • # Tweaks to a few other checklist items that were found to be slightly wrong or needed improving.
  • Version 0.3:
  • Date Released 23/01/2013
  • Private Release
  • # Modifications to the checklist layout structure to make it final, based on beta user feedback.
  • # Dataref integration added for:
  • Pre-Flight
  • Before Engine Start
  • Automatic Engine Start
  • # clist.txt file structure tidied-up further to make it easier to follow.
  • # Corrected several minor errors with datarefs
  • # Improved Installation Instructions.txt
  • Version 0.2:
  • Date Released 22/01/2013
  • Private Release
  • # Modified checklist layout to show itemised checklist items, broken down where appropriate.
  • # Experimenting with different ways of presenting the various items. # Released with just the "Before Engine Start" checklist included to prove dataref integration functionality.
  • Version 0.1:
  • Date Released 22/01/2013
  • Public Release
  • # Simple checklist layout, manual click box format.
  • # Contains 18 separate checklists for the Jetstream 32.
  • # No dataref integration for this version.
  • Checklists Included:
  • Aircraft Acceptance
  • Pre-Flight
  • Before Engine Start
  • Automatic Engine Start
  • Manual Engine Start
  • After Start
  • Taxi
  • Before Takeoff
  • Takeoff
  • After Takeoff
  • Climb
  • Cruise
  • Descent
  • Before Landing
  • After Landing
  • Shutdown
  • Engine Fire
  • Both Engines Fire
  • James Gillies
  • forums.x-plane.org "JimboG"
  • 03/02/2013

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...