LES DC-3 oil pressure problem

[w9nwrwi]

Using the LES DC-3 (64 bit) checklist page 3, with an RPM of around 800 my oil pressure is 85 vs 40 per checklist. With a RPM of 1600 the pressure is around 97 (Red line).  Power check of 2700 RPM and the oil pressure is well over 100.

 

I do see oil pressure of some of my other aircraft as being abnormally high.  Is this a bug within the LES DC-3, or is it something that should be adjusted within planemaker?

 

After a Google search of Oil Pressure problem in LES DC-3 I readjusted in planemaker the Systems/Limits 2 Nominal Oil Pressure to

070 the Redline to 15,  Green Arc to 40 Yellow to 87 (checked) and Redline to 95. This change did not have any affect at all.

 

Thanks for any help

 

Chuck

 

[iomagico]

Using the LES DC-3 (64 bit) checklist page 3, with an RPM of around 800 my oil pressure is 85 vs 40 per checklist. With a RPM of 1600 the pressure is around 97 (Red line).  Power check of 2700 RPM and the oil pressure is well over 100.

 

I do see oil pressure of some of my other aircraft as being abnormally high.  Is this a bug within the LES DC-3, or is it something that should be adjusted within planemaker?

 

After a Google search of Oil Pressure problem in LES DC-3 I readjusted in planemaker the Systems/Limits 2 Nominal Oil Pressure to

070 the Redline to 15,  Green Arc to 40 Yellow to 87 (checked) and Redline to 95. This change did not have any affect at all.

 

Thanks for any help

 

Chuck

Had your same problem and fixed on Planemaker as you did.

Now it works ok.

Be sure to save before closing Planemaker.

For reference, win8 64bit, x-plane 10.22 here.

[Goran_M]

Next update will address this as well.

Should be out very soon. 

[w9nwrwi]

Thanks to you both for replying,

 

I will leave planemaker alone and wait for the update.

 

Chuck