speed brakes to be constantly deployed (in Xprerealistic and Simshaker)

[erarda]

Thank you for your reply. One more thing, I noticed that the aircraft considers the speed brakes to be constantly deployed (in Xprerealistic and Simshaker). I think the data sent to these programs is reversed.

[Pils]

I don't think the devs claim any compatibility (or incompatibility) with either solution. And I doubt they'll be installing them (especially as it's dubiously-supported payware). Can you provide more technical details? Such as captures from DataRefEditor? No-one else has reported these problems in 4 years since release. Thanks.

[erarda]

Of course I will.

[erarda]

 

There is a old post about this problem here.

[erarda]

and this one too

[Pils]

Yea, well, don't use XPRealistic?

[erarda]

That’s not a solution to fix the problem.

there is something wrong with the code of the speedbrake. If it was only Xprealistic ok but other program use this data like simshaker or simhaptic.

[erarda]

here a view of simshaker analysis with speedbrake fully retract

AircraftName: CL60
EngineType: Jet
Total Weight:0 lb
OnGround: True
SurfaceType: Concrete
MaxRPM: 0

Pitch: 0 Bank: 0

EngineRPM[0]:11103 RPMPercent[0]:026% ManifoldPressure[0]:29,92PSi Vibration[0]: 0 TurbVibration[0]: 0
EngineRPM[1]:11104 RPMPercent[1]:026% ManifoldPressure[1]:29,92PSi Vibration[1]: 0 TurbVibration[1]: 0
EngineRPM[2]:00000 RPMPercent[2]:000% ManifoldPressure[2]:00,00PSi Vibration[2]: 0 TurbVibration[2]: 0
EngineRPM[3]:00000 RPMPercent[3]:000% ManifoldPressure[3]:00,00PSi Vibration[3]: 0 TurbVibration[3]: 0
PropRPM[0]:01907 RPMPercent[0]:000%
PropRPM[1]:01923 RPMPercent[1]:000%
PropRPM[2]:00000 RPMPercent[2]:000%
PropRPM[3]:00000 RPMPercent[3]:000%
PropRotationAngle: 0
EngineStarter[0]:False%
EngineStarter[1]:False%
EngineStarter[2]:False%
EngineStarter[3]:False%
APURPM:0
AfterburnerPercent:System.Int64[]%
EngineRotorRPM[0]:0%
EngineRotorRPM[1]:0%
EngineRotorRPM[2]:0%
EngineRotorRPM[3]:0%

GroundSpeed:0 kts
TrueAirSpeed:0,2 kts
Acceleration Body X: 000,00 , Y:000,00 , Z: 000,00 feet/s
Acceleration World X:000,00 , Y:000,00 , Z: 000,00 feet/s
Velocity Body X:000,00 , Y:000,00 , Z: 000,00 feet/s
Wind Aircraft X:000,00 , Y:000,00 , Z: 000,00 knots
GForce: 1
AoA:35,3 °
AboveGroundLevel:0 feet
StallAlpha:10 °

SpeedbrakesPercent[0]:  100%
SpeedbrakesPercent[1]:  0%
TrailingFlapsPercent[0]:0%
TrailingFlapsPercent[1]:0%
LeadingFlapsPercent[0]: 0%
LeadingFlapsPercent[1]: 0%
 
And now fully open

SpeedbrakesPercent[0]:  0%
SpeedbrakesPercent[1]:  0%
TrailingFlapsPercent[0]:0%
TrailingFlapsPercent[1]:0%
LeadingFlapsPercent[0]: 0%
LeadingFlapsPercent[1]: 0%


And you have photo of the sending data by Xplane.
FULLY RETRACTED

 

FULLY DEPLOYED

Edited December 3 by erarda